• 제목/요약/키워드: Detachment time

검색결과 101건 처리시간 0.033초

Development of a 2 Dimensional Numerical Landscape Evolution Model on a Geological Time Scale (2차원 지질시간 규모 수치지형발달모형의 개발)

  • Byun, Jong-Min;Kim, Jong-Wook
    • Journal of the Korean Geographical Society
    • /
    • 제46권6호
    • /
    • pp.673-692
    • /
    • 2011
  • Advances in computer technology have enabled us to develop and use numerical landscape evolution models (NLEMs) for exploring the dynamics of geomorphic system from a variety of viewpoints which previously could have not been taken. However, as of yet there have been no trials using or developing NLEMs in Korea. The purpose of this research is to develop a 2 dimensional NLEM on a geological time scale and evaluate its usefulness. The newly developed NLEM (ND-NLEM) treats bedrock weathering as one of the major geomorphic processes and attempts to simulate the thickness of soil. As such it is possible to model the weathering-limited as well as the transport-limited environment on hillslopes. Moreover the ND-NLEM includes not only slow and continuous mass transport like soil creep, but also rapid and discrete mass transport like landslides. Bedrock incision is simulated in the ND-NLEM where fluvial transport capacity is large enough to move all channel bed loads, such that ND-NLEM can model the detachment-limited environment. Furthermore the ND-NLEM adopts the D-infinity algorithm when routing flows in the model domain, so it reduces distortion due to the use of the steepest descent slope flow direction algorithm. In the experiments to evaluate the usefulness of the ND-NLEM, characteristics of the channel network observed from the model results were similar to those of the case study area for comparison, and the hypsometry curve log during the experiment showed rational evidence of landscape evolution. Therefore, the ND-NLEM is shown to be useful for simulating landscape evolution on a geological time scale.

Reduction of Glutathione and Apoptosis of Human Doparminergic Neuroblastoma SH-SY5Y Cells by Peroxynitrite (Peroxynitrite에 의한 사람 신경세포종 SH-SY5Y의 glutathione 감소와 apoptosis)

  • 김명선;이강민;박래길
    • Toxicological Research
    • /
    • 제16권2호
    • /
    • pp.133-139
    • /
    • 2000
  • This study was designed to evaluate the mechanism by which reactive nitrogen intermediates (RNI) induced the cytotoxicity of human doparminergic neuroblastoma SH-SY5Y cells. 3-Morpholino-sydnonimine (SIN-l), a donor of peroxynitrite (ONOO) and sodium nitroprusside (SNP), a donor of nitric oxide (NO) induced cell detachment and apoptotic death, as characterized by chromatin condensation, the ladder pattern fragmentation of genomic DNA and morphological nuclear changes. SIN-l also induced the activation of caspase 3-like protease in a time-dependent manner. Exogenous antioxidants, such as reduced glutathione (GSH), N-acetylcysteine (NAC), and selenium protected the cells from apoptotic death and reduced the activation of caspase 3-like protease by SIN-1. Furthermore, SIN-l directly reduced the intracellular levels of glutathione. Taken together, these data suggested that RNI including NO and peroxynitrite decrease the concentration of intracellular antioxidant such as GSH, which lead to the apoptotic death of human neuroblastoma SH-SY5Y cells.

  • PDF

A Study on the High Temperature Filtration Performance Test of Low Density Ceramic Filters (저밀도 세라믹 필터의 고온 여과 성능시험에 관한 연구)

  • 이동섭;홍민선;최종인
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제17권1호
    • /
    • pp.75-84
    • /
    • 2001
  • Hot gas filtration method via using ceramic filters is an evolving technology applicable to numerous industrial and air pollution control processes. Alumino silicate, organic and inorganic binders were the major raw materials in manufacturing ceramic filters. In this work, disc type ceramic filters(50$\phi$$\times$10t) were manufactured by vacuum forming processes using ceramic raw materials. The porosity and bulk density of disc type ceramic filers ranged from 86 to 89% and from 0.27 to 0.36 g/㎤, respectively. In this work disc type ceramic medium were tested utilizing coupon experimental apparatus. Disc type filters showed high collection efficiencies over 99.96% with Darchs law coefficients of 4.1$\times$10(sup)10~9.63$\times$10(sup)10/$m^2$ depending on mean pore sizes. In addition, filtration and detachment of ceramic filters turned out to be performed effectively using 10 cm/sec face velocity, 5 minutes filtration cycle, 100msec pulse jet valve opening time and 3 bar pulsing pressure.

  • PDF

Data Mining for Detection of Diabetic Retinopathy

  • Moskowitz, Samuel E.
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 한국퍼지및지능시스템학회 2003년도 ISIS 2003
    • /
    • pp.372-375
    • /
    • 2003
  • The incidence of blindness resulting from diabetic retinopathy has significantly increased despite the intervention of insulin to control diabetes mellitus. Early signs are microaneurysms, exudates, intraretinal hemorrhages, cotton wool patches, microvascular abnormalities, and venous beading. Advanced stages include neovascularization, fibrous formations, preretinal and vitreous microhemorrhages, and retinal detachment. Microaneurysm count is important because it is an indicator of retinopathy progression. The purpose of this paper is to apply data mining to detect diabetic retinopathy patterns in routine fundus fluorescein angiography. Early symptoms are of principal interest and therefore the emphasis is on detecting microaneurysms rather than vessel tortuosity. The analysis does not involve image-recognition algorithms. Instead, mathematical filtering isolates microaneurysms, microhemorrhages, and exudates as objects of disconnected sets. A neural network is trained on their distribution to return fractal dimension. Hausdorff and box counting dimensions grade progression of the disease. The field is acquired on fluorescein angiography with resolution superior to color ophthalmoscopy, or on patterns produced by physical or mathematical simulations that model viscous fingering of water with additives percolated through porous media. A mathematical filter and neural network perform the screening process thereby eliminating the time consuming operation of determining fractal set dimension in every case.

  • PDF

Effect of Hydraulic Loading on Biofilm Characteristics in an Inverse Fluidized Bed Biofilm Reactor (역 유동층 생물막 반응기에서 수리학적 부하가 생물막 성상에 미치는 영향)

  • 김동석;최윤찬
    • Journal of Environmental Science International
    • /
    • 제4권3호
    • /
    • pp.221-228
    • /
    • 1995
  • Stability of reactor and effect on biofilm characteristics were investigated by varying the hydraulic residence time in an inverse fluidized bed biofilm reactor(IFBBR). The SCOD removal efficiency was maintained above 90 % in the HRT range of 12hr to 2hr, but the TCOD removal efficiency was dropped down to 50% because of biomass detachment from overgrown bioparticles. The reactor was stably operated up to the conditions of HRT of 2hr and F/M ratio of 4.5kgCOD/$m^3$/day, but above the range there was an abrupt increase of filamentous microorganisms. The optimum biofilm thickness and the biofilm dry density in this experiment were shown as $200\mu\textrm{m}$ and $0.08 g/cm^3$, respectively. The substrate removal rate of this system was found as 1st order because the biofilm was maintained slightly thin by the increased hydraulic loading rate.

  • PDF

DESIGN AND PERFORMANCE OF A PROTOTYPE MOTORISED MANGO HARVESTER

  • Muhammad Salih, H.J.;Muhamad Ruhni, C.
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
    • /
    • pp.744-751
    • /
    • 1993
  • A prototype motorised hand-held mango harvester was designed and fabricated at the faculty of Engineering , University of Agriculture Malaysia. The harvester is aimed at reducing the harvesting operation time, improving the working comfort during the operation and increasing the harvesting capacity. The mango harvester consists of gripping and detaching devices, a power transmission shaft with a 12 V battery operated motor and an aluminium pole together with a collecting chute. Preliminary observation on the harvester's performance showed significant and satisfactory results. It was found out that the magno harvester was capable of harvesting on an average six seconds for each fruit detachment. Further study is being conducted to improve the efficiency and capacity of the mango harvester.

  • PDF

Automatic Quality Control of Fuel Pump Motor Using Vibration Analysis (연료펌프 모터의 진동품질관리 자동화)

  • Lee J.K.;Park B.S.;Yoon J.S.;Kang E.S.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 한국정밀공학회 2006년도 춘계학술대회 논문집
    • /
    • pp.303-304
    • /
    • 2006
  • In this work, we developed an equipment for automatic quality control of fuel pump motor using vibration analysis. The equipment automatically performs a series of tasks such as aligning and conveying the motor, attachment/detachment of an accelerometer, data acquisition, vibration analysis, and classification, etc. Compared to previous manual operations, the developed system is able to provide considerable savings in both time and cost.

  • PDF

Analysis of relationship between daily inflow rate fluctuation and surface wave transfer velocity in water treatment processes (일 유입유량 변동과 공정내 표면파 전파속도 상관성 분석)

  • Park, No-Suk;Lim, Seong-Eun;Kim, Seong-Su;Hwang, Jun-Sik;Jung, Nahm-Chung
    • Journal of Korean Society of Water and Wastewater
    • /
    • 제22권2호
    • /
    • pp.239-243
    • /
    • 2008
  • The fluctuation of inlet flow to a water treatment plant makes a serious problem that it can change the outlet flow-rate from each process abruptly, and ultimately occur the detachment of the attached particles inside each unit process. Also, since it takes very short time for the surface wave occurred from the fluctuation of inlet flow to reach the latter processes, it is impossible for operators to cope with that stably. Therefore this study was conducted to suggest the methodology for accurately predicting the travel time of surface wave occurred from the fluctuation of inlet flow to reach the latter process. Through the experiment, which was carried out for the full-scale water treatment plants(capacity : 2,000m3/d), it could be confirmed that the flow rate fluctuation from equalization tank produce the surface wave. And the wave transfer velocity is a function of the hydraulic radius and the length of each open type tanks which are comprised in the latter processes.

Molecular Diagnosis of an Ocular Toxocariasis Patient in Vietnam

  • De, Nguyen Van;Trung, Nguyen Vu;Duyet, Le Van;Chai, Jong-Yil
    • Parasites, Hosts and Diseases
    • /
    • 제51권5호
    • /
    • pp.563-567
    • /
    • 2013
  • An ocular Toxocara canis infection is reported for the first time in Vietnam. A 34-year-old man residing in a village of Son La Province, North Vietnam, visited the National Eye Hospital (NEH) in August 2011. He felt a bulge-sticking pain in his left eye and loss of vision occurred over 3 months before visiting the hospital. The eye examination in the hospital showed damage of the left eye, red eye, retinal fibrosis, retinal detachment, inflammation of the eye tissues, retinal granulomas, and a parasitic cyst inside. A larva of Toxocara was collected with the cyst by a medical doctor by surgery. Comparison of 264 nucleotides of internal transcribed spacer 2 (ITS2) of ribosomal DNA was done between our Vietnamese Toxocara canis and other Toxocara geographical isolates, including Chinese T. canis, Japanese T. canis, Sri Lankan T. canis, and Iranian T. canis. The nucleotide homology was 97-99%, when our T. canis was compared with geographical isolates. Identification of a T. canis infection in the eye by a molecular method was performed for the first time in Vietnam.

Structure-property relations for polymer melts: comparison of linear low-density polyethylene and isotactic polypropylene

  • Drozdov, A.D.;Al-Mulla, A.;Gupta, R.K.
    • Advances in materials Research
    • /
    • 제1권4호
    • /
    • pp.245-268
    • /
    • 2012
  • Results of isothermal torsional oscillation tests are reported on melts of linear low density polyethylene and isotactic polypropylene. Prior to rheological tests, specimens were annealed at various temperatures ranging from $T_a$ = 180 to $310^{\circ}C$ for various amounts of time (from 30 to 120 min). Thermal treatment induced degradation of the melts and caused pronounced decreases in their molecular weights. With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts. A melt is treated as an equivalent network of strands bridged by junctions (entanglements and physical cross-links). The time-dependent response of the network is modelled as separation of active strands from and merging of dangling strands with temporary nodes. The stress-strain relations involve three adjustable parameters (the instantaneous shear modulus, the average activation energy for detachment of active strands, and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. Good agreement is demonstrated between the experimental data and the results of numerical simulation. The study focuses on the effect of molecular weight of polymer melts on the material constants in the constitutive equations.