• 한국식품영양학회지
• /
• 제12권2호
• /
• pp.191-191
• /
• 1999

A Purge & Trap Concentrator was used to analyze various volatile organic compounds(VOCs) in wat-er. The object of this study was to observe the purge efficiency of 40 VOCs in water according to the change of parameters (purge time drypurge time sample temperature) and to determine the optimum condition for VOCs using the purge & Trap concentrator interfaced with a narrow capillary connected to a gas chromatography/mass spectrometry. The optimum condition of purge and trap is as follows: purge time at 11min drypurge time at 5min sample temperature at 6$0^{\circ}C$ at constant purge flow (40mol/min) constant desorption flow(20ml/min) desorption temperature(2$25^{\circ}C$) and desorption time (1min) At this analytical condition the detection limits of VOCs was in the range of 0.1~0.5$\mu$g/ml and the purge efficiency of each compound was over 70%.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권1호
• /
• pp.26-34
• /
• 2005

토양과 유기화합물의 접촉시간은 흡착과 탈착의 특성에 영향을 미치는 중요한 요소 중의 하나이다. 본 연구에서는 atrazine의 토양 흡착과 탈착에 미치는 접촉시간의 영향을 연구하였다. 등온 흡착실험을 수행하여 토양과 수용액 사이의 분배계수를 구하였고, 탈착에 대한 동력학 실험을 수행하고 three-site desorption모델을 이용, 회기분석 하여 탈착속도 계수들을 추산하였다. atrazine과 토양의 접촉시간은 2일에서부터 8개월까지 변화시켰다. 2일 흡착에 대한 atrazine의 흡착등온 곡선은 거의 선형이었고$(r^2>0.97)$, 흡착분배계수는 토양의 유기탄소 함량과 강한 양의 상관관계를 가졌으며 사용한 모든 토양에서 접촉시간이 길어질수록 증가하였다. 흡착곡선에서의 비선형성은 Houghton muck토양을 제외하고는 접촉시간에 따라 증가하지 않았다. 탈착실험 분석으로부터 접촉시간이 증가함에 따라 equilibrium site분율은 감소하고 non-desorbable site 분율은 증가함을 알 수 있었다. 사용한 모든 토양에서 토양유기탄소 함량으로 표준화한 경우 desorbable sites 에서의 atrazine농도는 접촉시간에 따라 비교적 일정한 것에 비해 non-desorbable site에서의 atrazine농도는 접촉시간이 증가함에 따라 증가하였다.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.76-81
• /
• 2009

Thermal desorption systems are designed to remove organic compounds from solid matrices such as soils, sludges and filter cakes without thermally destroying them. It is a separation technology, not a destruction technology. Since it is a thermal process, there is a common belief that temperature is the only significant parameter to be monitored. While it is true that better removal efficiencies are usually achieved at higher temperatures, other factors must be considered. Since the process is governed by mass transfer, heating time and the amount of mixing are also key parameters in optimizing removal efficiency. Thermal desorption have been successfully used for just about every organic contaminant found to date. It has also been used to remove mercury. In the present study, the numerical simulation has been performed to investigate the characteristics of heat transfer of LTTD(low temperature thermal desorption). The commercial software, AMESIM was applied for analyzing the heat transfer process in the LTTD.

• 한국환경보건학회지
• /
• 제31권1호
• /
• pp.73-78
• /
• 2005

A determination method of trace Ni(II) and Zn(II) in aqueous solution was studied and developed by adsorbing on titanium dioxide. For this purpose, several conditions were optimized such as the pH of sample solution, adsorption time, the types and concentration acid, and desorption time. The titanium dioxide was added in sample solution which was pH adjusted. Then, the sample solution was stirred for 5 minutes. This mixture was stored in room temperature for 30 minutes to allow adsorption. After filtering and washing the titanium dioxide, the analytes were dissolved from the titanium dioxide on membrane filter by an ultrasonic vibration for 10 minutes in 1.0 M $HNO_3$ solution. Then, this sample solution was analysed using ICP-AES. The adsorption equilibrium was achieved in 30 minutes. The desorption was the most of effective with 1.0 M(mol/l) nitric acid solution, and desorption time was 10 minutes. This procedure was applied for the analysis of two real samples, i.e., brown seaweed and tangle. The recoveries of Ni(II) and Zn(II) in spiked samples were 89.4${\sim}$98.9% for analytes.

• Membrane and Water Treatment
• /
• 제7권1호
• /
• pp.39-53
• /
• 2016

In this study, polysufone (PSf) was used as a base polymer to synthesize sulfonated polysulfone (SPSf) and aminated polysulfone (APSf) as cation and anion exchange polymers, respectively. Then the ion exchange polymers were coated onto the surface of commercial carbon electrodes. To compare the capacitive deionization (CDI) and membrane capacitive deionization (MCDI) processes, the pristine carbon electrodes and ionic polymer coated electrodes were tested under various operating conditions such as feed flow rate, adsorption time at fixed desorption time, and feed concentration, etc., in terms of effluent concentration and salt removal efficiency. The MCDI was confirmed to be superior to the CDI process. The performance of MCDI was 2-3 times higher than that of CDI. In particular, the reverse desorption potential was a lot better than zero potential. Typically, the salt removal efficiency 100% for 100 mg/L NaCl was obtained for MCDI at feed flow rate of 15 ml/min and adsorption/desorption time of 3 min/1 min and applied voltages 1.0 V for adsorption and -0.3 V for desorption process, and for 500 mg/L, the salt removal efficiency 91% was observed.

• 한국산업보건학회지
• /
• 제19권4호
• /
• pp.403-411
• /
• 2009

This study was performed to propose appropriate conditions suited to the analysis of naphthalene by comparing desorption efficiencies under various conditions. 1. As to influence by adsorbing media and desorbing solvent on desorption efficiency of naphthalene, when adsorbed by CCT, o-xylene gave the highest desorption efficiency of $73.96{\pm}0.53%$ while the lowest of $1.14{\pm}0.03%$ desorbed by ether. Both XAD-2 and Chromosorb 106 showed around 90% of desorption efficiencies for each solvent, especially desorption efficiencies more than 95% were achieved when adsorbed by Chromosorb 106 and desorbed by $CS_2$ or o-xylene. 2. Desorption efficiencies descended over the storage period in any condition(p<0.05). For all three adsorbing media, while desorption efficiencies showed no significant difference(p>0.05) between room temperature and refrigeration a day of loading, samples kept in room temperature had higher desorption efficiencies than refrigerated ones in 7 and 14 days with significant difference(p<0.05).Also, desorption efficiencies dropped drastically in 7 days, from that point the decreasing tendency went mild. 3. When respective 1 TLV and 0.1 TLV of naphthalene were spiked on CCT and desorbed by CS2($46.45{\pm}0.59%$ vs. $30.15{\pm}0.81%$), o-xylene($73.96{\pm}0.53%$ vs. $67.51{\pm}1.34%$), and ether($1.14{\pm}0.03%$ vs. N.D.) desorption efficiencies increased as the amount of loading increased(p<0.05).On the other hand, naphthalene spiked on XAD-2 and Chromosorb 106 indicated no significant difference(p>0.05) in desorption efficiencies between 1 TLV and 0.1 TLV. In conclusion, in order for favorable desorption efficiencies of naphthalene it is important to select appropriate adsorbing media and desorbing solvent accordingly. The result revealed that adsorbing media of XAD-2 and Chromosorb 106 outperformed CCT and desorbing solvents of $CS_2$ and o-xylene achieved over 90% of desorption efficiencies when adsorbed on XAD-2 and Chromosorb 106. Also, considering the tendency that desorption efficiencies of naphthalene decrease with time, the samples should be analyzed as soon as possible.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.384-387
• /
• 2008

We have studied the adsorption of contaminations on the MgO protective layer by Thermal Desorption Spectrometry (TDS). The result shows that the increase in exposure time, MgO thickness and humidity multiply the quantity of adsorbed contaminations. It is also found that the desorption activation energy and contamination quantity is decreased by the additional firing process of MgO layer under oxygen environment.

• 대한환경공학회지
• /
• 제38권11호
• /
• pp.627-634
• /
• 2016

본 연구에서는 탄소폼 흡착소재를 이용하여 산업도금폐수로부터 중금속을 흡착 제거한 후 탈착용액을 이용하여 제거된 중금속을 용출하고 회수하는 과정의 특성을 평가해 보고자 하였다. 용액의 조성에 따른 복합 중금속의 탈착 특성을 살펴본 결과 증류수 조건에서는 용출이 관측되지 않았으며, 탈착용액으로 HCl과 $H_2SO_4 $를 이용한 경우 높은 중금속 농도를 나타내었다. 탈착 용액을 이용함과 더불어 물리적 기술인 초음파 처리를 이용한 경우 중금속의 용출이 증진되는 것을 확인하였으며, 초음파 장치의 출력이 높고 반응 시간이 길수록 효율도 증가하는 것으로 나타났다. 탄소폼 흡착소재를 구리도금 세척수 처리에 적용시켜본 결과 200 반응기부피(Bed volume) 동안 안정적인 제거 성능을 나타내었으며, 흡착된 구리는 탈착용액을 이용하여 용출시킨 후 직류 전원 장치를 이용하여 회수할 수 있었다. 또한 구리가 회수된 탈착용액은 재이용 효율은 84.2%로 나타났다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1012-1016
• /
• 2008

[ $TiO_2-V_2O_5$ ] sol was fabricated using sol-gel method and $TiO_2-V_2O_5$ thin films were fabricated using dip-coating method. $V_2O_5$ sol was added 0.01mole, 0.03mole, 0.05mole into $TiO_2$ sol. As a results of crystalline properties, $V_2O_5$ peaks were not found in spite of $V_2O_5$ additive. Thickness of thin films increased $0.1{\sim}0.25{\mu}m$ every a dipping. Capacitance of thin films increased with increasing heat treatment temperature and it increased largest at $700^{\circ}C$. Capacitance of thin films decreased with increasing $V_2O_5$ additive and it increased largest at 0.01mole. Because adsorption time and desorption time of thin films was about 2 minutes 40 seconds and about 3 minutes 40 seconds respectively, adsorption time was faster about 1 minutes than desorption time.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권6호
• /
• pp.79-94
• /
• 2011

Black carbon (BC), a kind of high surface area carbonaceous material (HSACM), was isolated from Andong lake sediment. Sorption and desorption kinetics of naphthalene (Naph) and phenanthrene (Phen) in organic carbon (OC) and BC in the Andong lake sediment were investigated. Several kinetic models such as one-site mass transfer model (OSMTM), two-compartment first-order kinetic model (TCFOKM), and a newly proposed modified two-compartment first-order kinetic model (MTCFOKM) were used to describe the sorption and desorption kinetics. The MTCFOKM was the best fitting model. The MTCFOKM for sorption kinetics showed that i) the sorbed amounts of PAHs onto BC were higher than those onto OC, consistent with BET surface area; ii) the equilibration time for sorption onto BC was longer than those onto OC due to smaller size of micropore ($11.67{\AA}$) of BC than OC ($38.18{\AA}$); iii) initial sorption velocity of BC was higher than OC; and iv) the slow sorption velocity in BC caused the later equilibrium time than OC even though the fast sorption velocity was early completed in both BC and OC. The MTCFOKM also described the desorption of PAHs from the OC and BC well. After desorption, the remaining fractions of PAHs in BC were higher than those in OC due to stronger PAHs-BC binding. The remaining fractions increased with aging for both BC and OC.