• 생명과학회지
• /
• 제8권6호
• /
• pp.654-659
• /
• 1998

NR2B는 연접후 치밀질의 주요 tyrosine 인산화 단백질이다. 본 연구에서는 mass spectrometry 방법을 적용하여 NR2B의 tyrosine 인산화 위치를 동정하였다. NR2B를 N-octyl glucoside (NOG)에 용해되지 않는 PSD 분획으로부터 SDS-PAGE와 electroelution방법으로 분리하였다. 분리한 단백질을 NR2B와 phos-photyrosine에 특이한 항체로 조사한 결과 이들은 phosphotyrosine을 유지하고 있는 NR2B임이 확인되었다. 이 단백질을 trypsin 혹은 endolys-C 처리하고, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry 방법으로 조사한 결과 Tyr-1304이 인산화됨을 확인하였다.

• 공업화학
• /
• 제7권4호
• /
• pp.653-660
• /
• 1996

산소 PSA 장치 구성을 위하여, 여러 가지 흡착제에 대한 산소 및 질소의 평형흡착량을 측정하여 유효흡착량을 비교함으로써 산소 PSA에 적절한 흡착제를 선정하였고 Langmuir isotherm parameter를 구하였다. PSA 공정의 단계는 흡착, 탈착, 축압, 세정 및 균압 등으로 구성하고 흡착압력은 2atm을 기준으로 운전하였고 탈착압력은 120~400torr이며 cycle time은 2탑 80, 3탑 180초로 운전하였다. 2탑식과 3탑식 산소 PSA 장치의 운전특성과 경제성을 비교 분석하기 위하여, 운전조건에 따른 2탑식 및 3탑식 공정의 제품 생산성, 산소농도, 회수율을 비교하였고, 세정 및 축압단계의 영향을 분석하였으며, 대형화 하였을 경우의 투자비와 전력비를 추산하여 2탑식과 3탑식 산소 PSA의 경제성을 비교하여 $700Nm^3/hr$ 이하 규모에서는 2탑식이 유리함을 확인하였다.

• Journal of Microbiology and Biotechnology
• /
• 제17권2호
• /
• pp.207-217
• /
• 2007

The Saccharomyces0 cerevisiae KNU5377 strain, which was isolated from spoilage in nature, has the ability to convert biomass to alcohol at high temperatures and it can resist against various stresses [18, 19]. In order to understand the defense mechanisms of the KNU5377 strain under menadione (MD) as oxidative stress, we used several techniques for study: peptide mass fingerprinting (PMF) by matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry (MS) followed by two-dimensional (2D) gel electrophoresis, liquid chromatography electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS), and surface-enhanced laser desorption ionization-time of flight (SELDI-TOF) technology. Among the 35 proteins identified by MALDI-TOF MS, 19 proteins including Sod1p, Sod2p, Tsa1p, and Ahp1p were induced under stress condition, while 16 proteins were augmented under normal condition. In particular, five proteins, Sod1p, Sod2p, Ahp1p, Rib3p, Yaf9p, and Mnt1p, were induced in only stressed cells. By LC-ESI-MS/MS analysis, 37 proteins were identified in normal cells and 49 proteins were confirmed in the stressed cells. Among the identified proteins, 32 proteins were found in both cells. Five proteins including Yel047cp and Met6p were only upregulated in the normal cells, whereas 17 proteins including Abp1P and Sam1p were elevated in the stressed cells. It was interesting that highly hypothetical proteins such as Ynl281wp, Ygr279cp, Ypl273wp, Ykl133cp, and Ykr074wp were only expressed in the stressed cells. SELDI-TOF analysis using the SAX2 and WCX2 chips showed that highly multiple-specific protein patterns were reproducibly detected in ranges from 2.9 to 27.0 kDa both under normal and stress conditions. Therefore, induction of antioxidant proteins, hypothetical proteins, and low molecular weight proteins were revealed by different proteomic techniques. These results suggest that comparative analyses using proteomics might contribute to elucidate the defense mechanisms of KNU5377 under MD stress.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.52-58
• /
• 2012

Hydrogen-delayed fracture (HDF) was analyzed from the deposited weld metals of 600-MPa and 800-MPa flux-cored arc (FCA) welding wires, and then from the diffusible hydrogen behavior of the weld zone. Two types of deposited weld metal, that is, rutile weld metal and alkali weld metal, were used for each strength level. Constant loading test (CLT) and thermal desorption spectrometry (TDS) analysis were conducted on the hydrogen pre-charged specimens electrochemically for 72 h. The effects of microstructures such as acicular ferrite, grain-boundary ferrite, and low-temperature-transformation phase on the time-to-failure and amount of diffusible hydrogen were analyzed. The fracture time for hydrogen-purged specimens in the constant loading tests decreased as the grain size of acicular ferrite decreased. The major trapping site for diffusible hydrogen was the grain boundary, as determined by calculating the activation energies for hydrogen detrapping. As the strength was increased and alkali weld metal was used, the resistance to HDF decreased.

• 한국가스학회지
• /
• 제9권4호
• /
• pp.17-25
• /
• 2005

탈알루미늄 및 알칼리/알칼리토금속 양이온을 교환한 Y형 제올라이트 촉매를 제조하였다. 제조한 촉매물질의 원소조성 및 구조 변화를 ICP-AES, XRF 및 XRD와 같은 각종 분광학적 방법으로 분석하였으며, NO-TPD 실험을 통한 표면흡착종의 탈착 거동을 조사하였다. 탈알루미늄 처리 후 출발물질인 NaY보다 촉매물질의 Si/Al비는 증가하였으며, 탈알루미늄 후 Cs및 Ba양이온으로 교환한 Y형 제올라이트의 경우 Si/Al비가 부가적으로 조금 더 감소하였다. 탈알루미늄 처리한 촉매는 Al원자의 탈리로 기본골격의 파괴가 심화되어 framework (tetrahedral)구조가 감소하고 non-framework (octahedral) 구조가 증가하였다. 이러한 현상은 스팀처리시간이 많아질수록 증가하였으며 양이온을 교환한 후에는 더 크게 나타났다. NO-TPD 실험에서 탈알루미늄 및 양이온 교환 후 촉매의 활성점을 나타내는 탈착 봉우리들은 저온으로 이동하였으며, 스팀처리시간이 많아질수록 탈착 봉우리가 상대적으로 저온에서 나타났다. 탈알루미늄 및 양이온 교환을 한 Y형 제올라이트는 교환된 양이온과 탈알루미늄으로 인한 non-framework (octahedral) 구조의 생성이 촉매의 활성에 미치는 영향이 더 큰 것으로 나타났다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권1호
• /
• pp.1-35
• /
• 2007

지난 수십년 동안 토양내 수착된 오염물질이 접촉시간(contact time)이 경과함에 따라 생물학적 또는 화학적 이용성의 감소는 일반적으로 인식되어 오고 있다. 이와 같은 aging 또는 격리(sequestration)라 불리는 현상이 위해성에 직접적인 영향을 미친다는 것이 알려져 있다. 이러한 현상은 소수성 오염물질을 중심으로 보고되어 왔으나, 최근 연구결과에 의하면 중금속의 경우에도 이와 같은 현상이 발견되고 있으며, 이는 오염물질의 흡-탈착 이력(hysteresis) 현상, 비가역 흡착, 탈착저항성, 비평형 흡착 등과 직접적으로 연관된 것으로 알려지고 있다. Aging 또는 sequestration에 의한 오염물질의 생이용성(bioavailability)의 감소는 인체에 대한 실질적인 위해성의 감소를 의미한다. 최근 들어 이와 같은 과학적인 증거를 토대로 단순한 오염물질의 농도 측정이 아니라 위해성에 근거한 오염 복원(또는 관리)의 개념이 도입되어 환경친화적인 복원수준의 선정에 적용하고 있다. 이는 토양내 오염물질의 총농도가 아니라 오염물질의 생이용성 또는 독성을 기준으로 하여 정화수준을 결정함으로써 오염부지의 처리비용과 노력의 절감효과를 동시에 기대할 수 있기 때문이다. 토양내 잔류오염물질의 생이용성 또는 독성은 오염물질의 이동 또는 거동 특성에 의해 영향을 받으며 결국 생물체로의 노출 경로와 생체축적에 직접적인 영향을 미친다. 본 논문에서는 토양내 오염물질의 위해성을 평가하여 토양오염복원에 적용시 과학적인 타당성에 대해 살펴보고자 하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.350-353
• /
• 2004

This study was conducted for a rapid and simple method using GC/FID and SPME to dectermin gasonline and chlorinated solvents simultaneity. A sodium chloride concentration of 25%(vol/w) combined with such as magnetic stirried, an absorption time of 20min, an extraction temperature of 4$0^{\circ}C$, the volume of minimized 50mL of gaseous phase and a desorption time of 5min pleprovided the greatest sensitivity while maintaining analytical efficiency. Analytical parameter such as linearity was also evaluated. The linear range extend from 30 to 500ppb. The results of chlorinated solvents and gasoline mixed samples showed that solvents have been completely removed from the sample preparation step and more accurated than those obtained by the other methods.

• 한국환경과학회지
• /
• 제13권10호
• /
• pp.903-909
• /
• 2004

A new method based on solid phase microextraction(SPME), coupled with GC/FID, has been developed for the determination of PCE and TCE in water samples. The experimental parameters affecting the SPME process (i.e, kinds of fibers, extraction time, desorption time, extraction temperature, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. The coefficients of determination ($R^2$) for PCE and TCE were 0.9951 and 0.9831, respectively when analytes concentration ranges from 10 to 300$\mu$g/L. The relative standard deviations were 3.4 and $2.1\%$ for concentration of 10$\mu$g/L(n=5), respectively. The detection limits of PCE and TCE were 0.5 and l.3$\mu$g/L, respectively.

• 한국환경보건학회지
• /
• 제27권2호
• /
• pp.138-144
• /
• 2001

This study was carried out to investigate characteristics and Pb(II) removal effect of natural clays in the batch mode test. The effect of parameters such as temperature, adsorption time and coexisting cations on the sorption ability and characteristics was investigated to find out whether the clays could be used as adsorbents. Several natural clays from domestic have been investigated to have high specific surface area and have minerals such as SiO$_2$ and $Al_2$O$_3$. As a result, removal effects of Pb(II) on clays were reached at equilibrium in aqueous solutions by stirring about 20 minutes. The removal effect of Pb(II) was best for Kang Jin clay than other clays in terms of fixed time. Adsorption efficiency was not influenced by the possibility of continuous treatment system of wastewater which contain heavy metals by using natural clays from domestic.

• 센서학회지
• /
• 제14권5호
• /
• pp.343-349
• /
• 2005

Carbon nitride films were deposited on various substrates for humidity sensors with meshed electrode by reactive RF magnetron sputtering system. As the ratio of injected nitrogen was decreased, the sensitivity of sensor was increased. When the ratio of injected nitrogen was $50{\sim}70%$, the sample showed the best linearity. The sensor impedance changed from $95.4{\;}k{\Omega}$ to $2.1{\;}k{\Omega}$ in a relative humidity range of 5 % to 95 %. The humidity sensors based on silicon wafer revealed higher lineality and faster response than those of alumina or quartz substrates. The adsorption saturation time of the sample was about 80 sec, and its desorption time was about 90 sec.