• 자원리싸이클링
• /
• 제31권6호
• /
• pp.44-51
• /
• 2022

현재 전기로(EAF) 제강 공정에서는 내화재 보호 및 탈황능 개선을 위해 MgO 함유 Flux인 경소돌로마이트를 사용하고 있으며, 탈산 효과와 동시에 Slag foaming을 통한 전력에너지를 저감시키기 위해 가탄제를 투입하고 있다. 본 연구에서는 상기 효과들을 경제적으로 달성하기 위해 폐 MgO-C계 내화재를 사용하고자 한다. 폐 MgO-C계 내화재는 현재 대부분 재활용되지 못하고 폐기되고 있는 실정이지만 다량의 MgO와 흑연 성분을 함유하고 있어 제강용 Flux로서의 효용가치가 입증되면 대량 재활용이 가능할 것으로 기대된다. 본 실험에서는 상용 EAF slag 조성을 토대로 Target 조성 범위를 설정하였다. Target EAF slag가 원만히 형성될 수 있도록 하기 위해 Flux와 함께 투입될 Pre-melt base slag를 제조하였다. Pre-melt base slag는 SiO₂, Al₂O₃, FeO를 혼합하여 알루미나 도가니에 장입 후 1450℃에서 1시간 이상 가열하여 제조하였다. 이후 제조된 Pre-melt base slag에 혼합 Flux #2(경소돌로마이트+폐 MgO-C계 내화재+석회석)을 가하여 용융반응 시험을 수행하고 그 결과를 기존 제강 Flux에 해당하는 혼합 Flux #1(경소돌로마이트+석회석) 경우와 비교 평가하여 그 대체 가능성을 평가하였다. 신뢰성있는 평가를 도출하기 위해 XRD, XRF 및 Slag foam height, Slag basicity, 철 회수 등의 평가를 종합하였다.

• Asia Marketing Journal
• /
• 제15권4호
• /
• pp.103-129
• /
• 2014

Differentiated positioning becomes increasingly difficult when brand salience weakens. Also, the daily increase in new media use and information load has led to a social climate that regards advertising stimuli as spamming. For these reasons, the focus of advertisement-related communication is shifting from persuading consumers through the direct delivery of information to an emphasis on appealing to their emotions using matching stimuli to enhance persuasion effects. Recently, both academia and industry have increasingly shown an interest in storytelling methods that can generate positive emotional responses and attitude changes by arousing consumers' narrative processing. The purpose of storytelling is to elicit consumers' emotional experience to meet the objectives of advertisement producers. Therefore, the most important requirement for storytelling in advertising is that it evokes consumers' sympathy for the main character in the advertisement. This does not involve advertisements directly persuading consumers, but rather, consumers themselves finding an answer through the advertisement's story. Thus, consumers have an indirect experience regarding the product features and usage through empathy with the advertisement's main character. In this study, we took the results of a precedent study as the starting point, according to which consumers' emotional response can be altered depending on the storytelling methods adopted for storytelling ads. Previous studies have reported that drama-type and vignette-type storytelling methods have a considerably different impact on the emotional responses of advertising audiences, due to their different structural characteristics. Thus, this study aims to verify that emotional response aroused by different types of advertisement storytelling (drama ads vs. vignette ads) can be controlled by the socio-psychological gender difference of advertising audiences and that the interaction effects between the socio-psychological gender differences of the audience and the gender stereotype of emotions to which advertisements appeal can exert an influence on emotional responses to types of storytelling in advertising. To achieve this, an experiment was conducted employing a between-group design consisting of 2 (storytelling type: drama ads vs. vignette ads) × 2 (socio-psychological gender of the audience: masculinity vs. femininity) × 2 (advertising appeal emotion type: male stereotype emotion vs. female stereotype emotion). The experiment revealed that the femininity group displayed a strong and consistent empathy for drama ads regardless of whether the ads appealed to masculine or feminine emotions, whereas the masculinity group displayed a stronger empathy for drama ads appealing to the emotional types matching its own gender as well as for vignette ads. The theoretical contribution of this study is significant in that it sheds light on the controllability of the audiences' emotional responses to advertisement storytelling depending on their socio-psychological gender and gender stereotype of emotions appealed to through advertising. Specifically, its considerable practical contribution consists in easing unnecessary creative constraints by comprehensively analyzing essential advertising strategic factors such as the target consumers' gender and the objective of the advertisement, in contrast to the oversimplified view of previous studies that considered emotional responses to storytelling ads were determined by the different types of production techniques used. This study revealed that emotional response to advertisement storytelling varies depending on the target gender of and emotion type appealed to by the advertisement. This suggests that an understanding of the targeted gender is necessary prior to producing an advertisement and that in deciding on an advertisement storytelling type, strategic attention should be directed to the advertisement's appeal concept or emotion type. Thus, it is safe to use drama-type storytelling that expresses masculine emotions (ex. fun, happy, encouraged) when the advertisement target, like Bacchus, includes both men and women. For brands and advertisements targeting only women (ex. female clothes), it is more effective to use a drama-type storytelling method that expresses feminine emotions (lovely, romantic, sad). The drama method can be still more effective than the vignette when women are the main target and a masculine concept-based creative is to be produced. However, when male consumers are targeted and the brand concept or advertisement concept is focused on feminine emotions (ex. romantic), vignette ads can more effectively induce empathy than drama ads.

• 벤처혁신연구
• /
• 제6권1호
• /
• pp.181-198
• /
• 2023

본 연구는 의료기관에 종사하는 근로자들의 조직지원인식이 내재적 직무동기에 미치는 영향 관계를 분석하고, 이 과정에서 일-가정 갈등 및 일-가정 균형요인의 인과관계에 대한 유의성 여부도 확인해보고자 한다. 설문지를 통한 실증분석 결과를 살펴보면 다음과 같다. 첫째, 조직지원인식은 내재적 직무동기 뿐만 아니라 일-가정 균형에 유의적인 양(+)의 영향을 미치는 것으로 확인되었고, 일-가정 균형은 내재적 직무동기에 유의적인 양(+)의 영향을 미치는 것으로 확인되었다. 둘째, 조직지원인식은 일-가정 갈등에 유의적인 음(-)의 영향을 미치는 것으로 확인되었으나, 일-가정 갈등은 내재적 직무동기에 유의적인 영향력이 없는 것으로 확인되었다. 셋째, 의료기관 종사자들의 직무스트레스를 줄이기 위해서는 직무강도를 줄이고 능력에 적합한 업무량을 부여하며, 인력운영 및 업무효율성을 제고하기 위해 직무교육과 적재적소의 인력배치가 필요하다. 넷째, 긍정적인 조직지원인식과 내재적 직무동기 향상을 위해서는 현 직장에 대한 애착심을 높일 수 있고 다양한 유인체계로 조직의 문제를 자신의 문제로 인식할 수 있도록 지원 및 제도적 장치를 마련하여 장기근속을 유도하여야 한다. 본 연구의 한계점 및 향후 연구 방향은 다음과 같다. 첫째, 전국의 의료기관 종사자들을 지역별, 성별, 의료기관별, 학업별, 소득별 등으로 분류하여 확장된 분석을 실시하면 더 가치있는 결과를 얻을 수 있을 뿐만 아니라 의료서비스 품질에 대한 평가도 가능할 것으로 사료된다. 둘째, 의료기관 종사자들이 속한 병원의 환경 불확실성이나 경쟁 정도에 따라 직장에서의 일과 개인적인 삶의 균형 지원제도에 대한 영향력이 종업원마다 미치는 정도가 다를 수 있으므로 이를 반영할 필요가 있다. 셋째, 조직지원인식은 조직문화와 조직형태 그리고 조직규모 및 업무특성, 근무연수, 근무유형 등에 따라 다르게 인식될 것이므로 이를 반영할 필요가 있다. 넷째, 최근 정부의 의료기관 정책에 대한 변화와 글로벌 경영환경에 발맞추어 병원들의 조직구조, 직무설계, 조직지원 방식, 동기부여 접근방식, 인사고과의 평가 방법 등 다양한 신 인사관리 기법들을 설문지에 추가하여 분석하는 것이 필요하다. 또한 최근 및 가까운 미래의 의료 트렌드를 반영해서 분석하는 것도 중요하리라 사료된다.

• 한국전통조경학회지
• /
• 제41권4호
• /
• pp.49-56
• /
• 2023

본 연구는 옥호정의 조영자 김조순의 풍고집에 나타난 옥호정도의 내용 전체를 분석하여 풍고집내에 옥호정으로 확인할 수 있는 문헌의 내용을 통해 기존 연구와 옥호정도를 비교하고 조영자와 정원과 관련된 교유관계, 조영사실 등을 규명하였다. 그 결과는 다음과 같다. 첫째 옥호정의 조영자인 김조순은 문인취향이 강했던 요인으로 정원의 조영과 경영에 관련된 내용을 비교적 상세히 표현하여 정원의 원형을 추정하기 용이했다. 둘째, 옥호정의 조성연대는 기존에는 을해벽의 각자를 근거로 1815년으로 추정하였으나 이성민이 동성교여집에 김조순이 장씨집을 사들인 기록을 밝혀 1804년으로 정정하는 것이 바람직하다. 셋째, 풍고집에 나타난 김조순의 문예취미는 철저하게 중국고사 등을 따랐으나 정원조영 부분은 사실에 근거한 정원고고학적 기록으로서 그 가치를 지닌다. 정원의 부지확장에 대하여는 옥호정 남측 부분의 경계를 김생 사호에게 양도 받아 반칸 정도 늘린 것으로 추정되고 원예활동과 정원 곳곳에 가산이나, 석상, 괴석, 분재, 수반 등이 매우 다양하게 나타나고 있으며 특히 석가산을 조성하는 기법과 풍치에 대해 언급하고 있으며 어린 소나무의 이식에 대한 전문적 식견, 정원의 화목에 대한 애호와 풍류는 시문 곳곳에 깃들여 있다. 아울러 옥호정의 입지를 선정하기 위한 지형 지세의 파악과 기존 식생 등의 현황파악 능력, 초목을 베고 땅을 고른 과정과 기와와 초가로 지은 집들, 이 곳에서 한거하기 위한 목적과 안전을 기원하는 내용이 완벽한 옥호정 조성의 단계를 보여주고 모정인 산반루의 위치와 조성과정을 알 수 있어 정원고고학적 가치를 지닌다. 향후 풍고집에 등장한 교유인물들의 문집의 해석을 통해 옥호정의 정원원형에 대한 보다 많은 자료들이 발굴되기 위한 후속연구가 요구된다.

• 한국잠사곤충학회지
• /
• 제16권2호
• /
• pp.1-34
• /
• 1974

우리나라의 다회육 육잠체계를 확립하기 위해서 하추잠작을 안정시키기 위한 각종 요인 및 동요인이 실용형질에 미치는 경향을 구명코저 실시한 수개시험중 사육시기별 잠작에 관한 시험에서는 우선 우리나라에서 3회육 이상의 다회육을 할 경우 사육시기별 잠작의 정도를 구명코저 연간 11기를 4개장소, 3개년에 걸처 실시하였고, 결과에서 하추잠작이 불량했던 원인을 알고저 실시한 양잠농가의 추잠작 불안정 요인시험에서는 우리나라 전형적인 양잠농가로 추정되는 19호에 대한 주재 관찰조사 및 실험분석을 통한 실제의 불작요인을 조사하였다. 동조사에서 지적된 불작요인을 개선할 경우의 효과를 알고저 실시한 육잠기술 지도효과에서는 춘추 연40개 농가에게 불작요인을 개선 지도하였을 때 얻어지는 지도효과를 지도전년, 지도당년, 지도후년, 육잠기술 상, 하위 농가 및 춘추별로 인근 춘추 연758농가를 대조로 비교분석 하였다. 이상에서 간제되는 상엽질의 계절적 변화 추이를 알고저 시기별로 채취한 상엽분말을 동일시기 인공사료육을 통해서 양부의 판정을 시도하였고 이상에서 가장 큰 문제점으로 대두된 영양 및 온도조건이 하, 초추잠작에 있어서 누에 계량형질에 미치는 정도를 알고저 하잠시험에서는 치, 장잠별 엽질과 온도 등 4개요인을 하, 초추잠시기의 양부조건 2개수준(2$^4$), 초추잠시험에서는 하잠과 같은 4개요인에 변온 혹은 경엽구 1개수준을 추가한 3개수준(3$^4$)의 요인시험으로 실시했다. 이상에서 얻어진 시험들의 결과를 종합 요약하면 다음과 같다. 1. 사육시기별 잠작에 관한 시험 1)잠작의 일반적 경향은 춘잠은 소잠이 빠를수곡 양호하였으며 추잠은 관행소잠시기를 정점으로 하여 그 시기로부터 빠르거나 늦어질수록 점차로 불량하나, 빠를수록 급격하게 불량하다. 2) 우리나라의 잠기별 잠작은 춘(1~4기), 추(7~10기), 만추(11기), 하(5기) 초추(6기)잠 순으로 불량하였다. 3) 잠작과 영역접배를 고려한 다회 보통육은 1, 3, 8, 10기 등 4회육이 적합하고 조상 4회육은 10기 대신에 11기 대치로 무난하다. 2. 양잠농가의 추잠작 불안정 요인시험 1) 양잠농가의 수견량을 지배한 치명적인 요인은 잠실 잠구의 소독불충분에 의한 병원축적이며 2) 이차적 요인은 사육온습도 관리불량, 배게치기, 적숙엽 선정기술 불량 및 결상총과소 등이며 잠작과 경영구 요소는 관련이 없는것 같다. 3) 견층비율에는 뽕의 엽질이 가장 크게 영향되고, 다음으로 통원누적으로 인한 누에의 건강도에 영향한 것 같다. 3. 육잠기술 지도효과 1) 지도농가의 상자당 수견량 춘잠기 32.3kg, 추잠기 25.8kg으로서 대조 농가보다 각각 20%, 35%가 증수되어 연평균 29.0kg으로서 26%의 증수를 실증하였다. 2) 지도농가의 3등견 이상의 고치는 춘잠기 77.1%, 추잠기 83.7%로서 대조농가보다 각각 14.3%, 11.3%가 많았다. 3) 지도농가의 지도후년도의 상자당 수견중은 춘잠기 31.2kg, 추잠기 26.9kg, 연평균 28.9kg으로서 대조농가보다 각각 3%. 16%, 8%가 증수되였으므로 이는 기술지도의 잔류효과로 인정하였다. 4) 기술수준에 따른 잔류효과는 기술수준 상위농가는 0% 하위농가는 19%이었다. 4. 상엽질의 계절적 변화추이 1) 장잠기 상엽을 주재로 한 인공사료육의 결과는 춘＞ 만추≒하＞추≒＞ 초추의 순으로 우수했다. 2) 치잠기 상엽을 주재로한 인공사료육의 결과는 춘, 만추, 추, 하, 초추 순위의 경향을 보였으나 유의차는 인정되지 않았다. 5. 하추잠작 흉작 요인시험 1) 초추잠 (1) 치잠기의 고온은 생존율과 수견량을 크게 감소케 한 요인이 었으며, (2) 장잠기의 온도는 고온순으로 생존율, 수견량 및 견질을 저해하였다. 따라서 장잠기의 적온유대가 양과 질의 양면에서 중요함이 인정되었다. (3) 치잠기 연엽과 경엽은 단견중을 다소 가볍게 하고 경과일수를 크게 연장케 하였으나 생존률, 수견량 및 견층중 등에는 영향을 미치지 않았다. (4) 장잠기의 경엽은 수량과 특히 견질을 크게 저해 하였으나 연엽, 경엽 모두 생존률에는 영향을 미치지 않았다. (5) 장잠기 온도를 변온으로 하였을 경우 치잠기 온도도 변온으로 한 것이 유리한 경향을 보였는바 평강한 문제는 금후 검토되어져야 할 것이다. 2)하 잠 (1) 치잠기의 고온은 수견량과 단견중을 크게 감소케하였으며 다음으로 생존율을 저해하였다. (2) 장잠기의 고온은 수견량, 생존율 및 견질을 크게 저해하였다.

• 한국가정과교육학회지
• /
• 제29권4호
• /
• pp.161-193
• /
• 2017

본 연구의 목적은 고등학교 교육과정에서 활용할 수 있는 가정교과 기반의 예비부모교육 프로그램을 개발하고 평가하여, 예비부모인 고등학생 학습자들이 훗날 우리 사회의 주역이 될 미래세대를 현명하게 보살필 수 있는 성숙한 부모가 되는데 필요한 역량을 갖추도록 하며 동시에 현재 정부가 추진하고 있는 부모교육 활성화 방안의 청소년 대상 예비부모교육을 실행하는 데 도움이 되는 기초자료를 제공하는데 있다. 본 연구의 예비부모교육프로그램 개발 및 평가 과정은 일반적체제설계모형인 ADDIE 모형을 따랐으며, ADDIE모형 중 실행단계(Implement)를 제외한 분석, 설계, 개발, 평가의 4가지 과정을 거쳐 이루어졌다. 먼저, 분석 단계에서는 프로그램 내용요소 추출과 프로그램 개발의 시사점을 얻기 위해 관련 선행연구와 2015 개정 중 고등학교 "기술 가정" 교육과정 문서를 대상으로 분석이 이루어졌다. 그 결과 가정교과 이 외의 분야에서 연구되어 온 예비부모교육의 9 가지 주제(1.자기이해, 2.예비부모의 성, 3.결혼, 4.임신과 출산, 5.부모됨, 6.부모역할, 7.부모 자녀관계, 8.부모와 가족, 9.부모와 사회)와 해당 내용요소들은 이미 가정교과 교육과정에 모두 포함되어 있음을 확인하였으며, 9가지 주제 이외에 가정교과만의 독자적인 주제(1.생애설계, 2.가정생활 내 의 식 주 실천역량, 3.가정생활과 자녀안전, 4.가족문화)와 해당 내용요소들을 별도로 확인함으로써 예비부모교육 시행에 있어 가정교과가 지닌 강점(청소년과 가정과 사회를 바라보며 부모교육 내용 뿐만 아니라 식 의 주 소비 생활 전반을 포함하는 총체적 관점의 교육과 실제로 부모 준비를 실천하게 하는 교육)을 확인하였다. 둘째, 프로그램 개발을 위한 설계는 가정교과와 예비부모교육 간의 접점을 찾고 이를 프로그램 구성요소(목적, 개발방향, 주제, 내용요소, 학습목표, 학습활동)에 반영하는 과정을 통해 이루어졌다. 이 연구의 예비부모교육 프로그램은 미래세대를 현명하게 길러낼 수 있는 성숙한 부모가 지녀야 할 관련 지식, 태도, 가치관, 실천적 문제 해결 능력을 고등학생 학습자가 갖추도록 지원하는 것을 일차 목적으로 두며, 부모됨의 준비 관점에서 학습자가 현재 생활 점검 및 개선을 통해 생활자립능력을 갖추도록 하는 것을 이차목적으로 둔다. 궁극적으로 이 두 가지 목적 달성을 통해 학습자가 장차 부모로서 살아갈 가정생활 영역과 개인적 성취와 관련된 직업생활 영역 그리고 사회 발전에 기여할 수 있는 민주시민으로서의 삶의 영역간의 균형을 이뤄 이를 조화롭게 영위할 수 있는 성숙한 부모로의 성장을 돕고자 하였다. 프로그램 개발방향은 '전체 전개', '내용구성', '교수 학습법 구성'으로 크게 세 가지 측면에서 설정되었다. 프로그램의 주제는 총 11개로 '1. 부모 됨: 부모가 된다는 건', '2. 배우자선택: 행복한 부부관계, 자녀에게 주는 최고의 선물', '3. 임신과 출산: 새로운 생명과의 감동적인 만남', '4. 신생아 돌봄: 24시간 신생아 돌봄', '5. 영유아자녀돌봅: 사랑스러운 나의 아기와의 관계, 애착', '6. 유아기 자녀 돌봄: 별에서 온 내 아이, 유아기 자녀 돌보기', '7. 부모와 건강가정: 건강가정 속 부모와 자녀', '8.부모 자녀 관계: 현명한 부모, 자녀와 효과적으로 상호작용하기', '9. 가정생활 내 자녀안전: 가정생활 속 안전관리자, 부모', '10. 영유아 돌봄 실습', '11. 지역사회 양육지원서비스 개발 실습'이다. 프로그램의 들어갈 최종 내용요소들은 분석단계에서 추출된 내용요소들을 11개 주제와의 관련성을 토대로 분배된 후 선정되었다. 학습목표와 학습활동은 해당 주제와 내용요소를 반영하여 구상되었으며, 특히 프로그램의 학습활동은 1) 부모 됨 관련 실천적 문제를 포함한 사례 활용, 2) 학습한 지식과 기술을 활용한 지역사회 교류활동, 3) 부모 됨 관련 학습내용을 활용한 실생활 프로젝트 활동, 4) 고등학생 학습자의 현재 삶의 긍정적인 변화를 유도하는 활동, 그리고 5) 자녀 발달을 지원하는 가정교과 내 의 식 주 실습활동을 주요 특징으로 한다. 셋째, 프로그램의 개발은 앞서 설정된 설계에 따라 이루어졌으며, 이에 총 11개 주제에 따른 17차시 분량에 해당하는 교수 학습과 정안 및 학습자료가 개발되었다. 개발된 교수 학습과정안은 수업흐름 및 교사 참고자료를 포함하며, 수업 도입부에 가상의 자녀로부터 수업관련 메시지를 받는 것을 시작으로, 정리단계에서는 받은 메시지에 대한 답장의 형태로 해당 차시의 내용 정리 및 예비부모로서의 다짐을 하는 것을 기본 틀로 하였다. 학습자료는 학습활동을 위해 필요한 각종 계획서나 보고서 양식을 포함하며, 정규교육과정에서의 교과서와 같은 역할을 하도록 구체적으로 작성되었다. 넷째, 개발된 프로그램의 평가는 프로그램 개발과정과 결과물 두 가지 측면에 대해 가정교과 전문가 13인으로부터 5점 리커트형 설문지를 활용하여 이루어졌다. 개발과정에 대한 기초분석 평가결과 평균 4.61점, 내용타당도 지수 97.4%였으며, 프로그램 결과물에 대한 평가결과는 평균 4.37점 내용타당도 지수 86.9%였다. 이와 같은 값은 이 연구 프로그램의 개발과정과 그 결과물에 대한 타당도가 상당히 높은 수준에서 확보됐음을 나타내며, 이에 이 연구의 가정교과 기반의 예비부모교육 프로그램은 고등학생 학습자를 대상으로 하는 예비 부모 교육 프로그램으로 타당하고 적합하다는 결론을 내릴 수 있다.

• 한국의류학회지
• /
• 제32권12호
• /
• pp.1837-1847
• /
• 2008

카멜레온은 미끈한 몸통과 화려한 색 띠들을 가진 작은 도마뱀을 말하는데 빛, 온도, 기분에 따라 색이 변화하는 것이 특징이다. 또한, 변덕스러운 사람, 요염하고 매혹적인 사람, 속물적이면서도 상황에 재빨리 대처하는 사람 등을 일컬어 카멜레온이라고 하기도 한다. 본 연구의 목적은 상황에 따라 색이 변하는 카멜레온 이미지를 요염한 변덕장이들의 섹시한 스타일로 비유해서 Wearable Art에 실루엣, 색, 텍스처 개발 기술을 접목하여 표현하고자 한 것이다. 연구방법은 카멜레온의 사실적, 개념적 특징들을 Wearable Art 작품으로 표현해 나가는 단계에서 특히, 옷감 표면에 다양한 제작 기술들을 실험해 보는 과정으로 진행되었다. 작품 이미지 컨셉은 'sensuality', 'tempting', 'splendid', 'brilliant', 'fascinating' 등으로 표현했고, 연구자의 미래지향적 기호와 움직임을 통한 편하고(comfortable) 즐거울 수 있는(enjoyable)개념 역시 포함되도록 하면서 작품 완성도를 높였다. 디자인 및 제작 포인트는 실제 카멜레온의 전체 라인, 색, 표피 질감 등 그 특징들을 분석하여 본 작품의 형태, 색, 텍스처 등을 통해 상징적으로 표현하도록 하였고, 동시에 요염한 변덕장이 카멜레온의 이미지가 암시적으로 나타날 수 있도록 하였다. 작품 실루엣은 바디컨셔스 라인(body-conscious line)이다. 이것은 카멜레온의 날씬하고 미끈한 몸체를 이미지화 한 것이며 동시에, 속세적이면서도 미래적인 이미지가 암시적으로 표현되도록 한 것이다. 카멜레온 등뼈가 드러난 것을 드레스 등이 노출되도록 하여 표현하였는데 이것은 동시에 관능적이고 요염한 카멜레온 이미지를 나타내는 것이다. 카멜레온의 유선형 머리부분 표현은 완만한 삼각형 모양의 후드패턴을 통해, 카멜레온의 길게 말린 꼬리 표현은 불규칙적인 플레어의 햄 라인으로 처리하여 상징적으로 표현하였다. 카멜레온 색들은 선명한 비비드 톤이면서 동시에 빛 또는 기분에 따라 색이 변화하는 것이 특징인데, 작품 제작 과정에서도 빛과 각도에 따라 드레스 색이 조금씩 다르게 보이는 효과를 가장 중요하게 연구하였다. 검정색 쉬폰 위에 퓨셔(fuchsia)색 작은 벨벳 물방울 무늬가 박힌 소재를 주 소재로 하여 표면에 입체적인 텍스처를 줌으로서 빛의 각도에 따라 두가지 색이 섞여져서 전체적으로 색이 다르게 보이는 착시 결과를 가져왔다. 허리에서의 빨강색과 파란색 계열의 다양한 스톤들은 실제 카멜레온 스킨 이미지와 더불어 돌출된 입체감과 그라데이션 효과로 인해 움직임에 따라 색이 다르게 보이는 결과를 가져왔다. 50% 쉬폰/50% 폴리에스테르에 벨벳 다트 무늬가 들어가 있는 원단을 사용하여 옷감 표면에 탄성실을 이용한 스모킹 주름효과를 주는 기술을 접목시켜 flexible한 스트레치성 옷감으로 재탄생시킴과 동시에 소재 표면에 오돌토돌한 텍스처가 생기게 하였다. 이것은 카멜레온의 표피와 흡사하면서 동시에 몸에 밀착되는 결과를 가져와 섹시하면서도 편안한 작품 이미지 표현에도 적절한 역할을 한다. 스톤장식은 아크릴릭카보숑(acrylic cabochons)과 잼스톤(gemstones)들을 섞어서 사용했는데 카멜레온 등 표피 질감을 상징함과 동시에 색이 다르게 보이는 효과를 나타낸다는 점에서 본 작품의 포인트이다. 드레스 제작은 주로 바이어스 결을 이용한 드레이핑 기법을 이용하였는데, 후드가 앞 몸판과 연결되어 있고 불규칙적인 사각형들이 앞에서 뒤로 옆 솔기 없이 연결되어 있다. 옷은 살아 움직이는 사람이 입어서 가장 편하고 즐거우면 옷의 완성도가 가장 높다고 할 수 있다. 카멜레온 드레스 역시 움직이는 신체와 함께 색이 다르게 보이는 기법과 효과를 연구하는 과정에서 편하고 즐거운 Wearable Art를 완성할 수 있었다. 바로 이점이 입는 예술 즉, 입고 즐길 수 있는 옷에 예술미를 가미한 Wearable Art의 진미가 아닐까 생각한다.

• 지능정보연구
• /
• 제24권2호
• /
• pp.221-241
• /
• 2018

최근 딥러닝 기술이 주목을 받고 있다. 대중들의 관심을 받았던 국제 이미지 인식 기술 대회(ILSVR)와 알파고(AlphaGo)에서 사용된 딥러닝 기술이 바로 합성곱 신경망(CNN; Convolution Neural Network)이다. 합성곱 신경망은 입력 이미지를 작은 구역으로 나누어 부분적인 특징을 인식하고 이것을 결합하여 전체를 인식하는 특징을 가진다. 이러한 딥러닝 기술이 우리의 생활에 있어 많은 변화를 야기할 것이라는 기대를 주고 있지만 현재까지는 이미지 인식과 자연어 처리 등에 그 성과가 국한되어 있다. 비즈니스 문제에 대한 딥러닝 활용은 아직까지 초기 연구 단계로 향후 마케팅 응답 예측이나 허위 거래 식별, 부도 예측과 같은 전통적 비즈니스 문제들에 대해 보다 깊게 활용되고 그 성능이 입증된다면 딥러닝 기술의 활용 가치가 보다 더 주목받게 될 것으로 기대된다. 이러한 때 비교적 고객 식별이 용이하고 활용 가치가 높은 빅데이터를 보유하고 있는 전자상거래 기업의 사례를 바탕으로 하여 딥러닝 기술의 비즈니스 문제 해결 가능성을 진단해보는 것은 학술적으로 매우 의미 있는 시도라 할 수 있겠다. 이에 본 연구에서는 전자상거래 기업의 고객 행태 예측력을 높이기 위한 방안으로 합성곱 신경망을 활용한 '이종 정보 결합(Heterogeneous Information Integration)의 CNN 모델'을 제시한다. 이는 정형과 비정형 정보를 결합하여 다층 퍼셉트론 구조의 합성곱 신경망에서 학습시키는 모델로서 최적의 성능을 발휘하도록 '이종 정보 결합'과 '비정형 정보의 벡터 전환', 그리고 '다층 퍼셉트론 설계'로 하는 3개의 내부 아키텍처를 정의하고 각 아키텍처 단위로 구성되는 방식에 따른 성능을 평가하여 그 결과를 바탕으로 제안 모델을 확정하고 그 성능을 평가해보고자 한다. 고객 행태 예측을 위한 목표 변수는 전자상거래 기업에서 중요하게 관리하고 있는 재구매 고객, 이탈 고객, 고빈도 구매 고객, 고빈도 반품 고객, 고단가 구매 고객, 고할인 구매 고객 등 모두 6개의 이진 분류 문제로 정의한다. 제안한 모델의 유용성을 검증하기 위해서 국내 특정 전자상거래 기업의 실제 데이터를 활용하여 실험을 수행하였다. 실험 결과 정형과 비정형 정보를 결합하여 CNN을 활용한 제안 모델이 NBC(Naïve Bayes classification)과 SVM(Support vector machine), 그리고 ANN(Artificial neural network)에 비해서 예측 정확도와 F1 Measure가 높게 평가되었다. 또 NBC, SVM, ANN에서 정형 정보만을 사용할 때 보다 정형과 비정형 정보를 결합하여 입력 변수로 함께 활용한 경우에 예측 정확도가 향상되는 것으로 나타났다. 따라서 실험 결과로부터 비정형 정보의 활용이 고객 행태 예측의 정확도 향상에 기여한다는 점과 CNN 기법의 특징 추출 알고리즘이 VOC에 사용된 단어들의 분포와 위치 정보를 해석하여 문장의 의미를 파악하는데 효과적이라는 점을 실증적으로 확인하였다는데 그 의미가 있다고 할 수 있겠다. 이를 통해서 CNN 기법이 지금까지 소개된 이미지 인식이나 자연어 처리 분야 외에 비즈니스 문제 해결에도 활용 가치가 높다는 점을 확인하였다는데 이 연구의 의의가 있다 하겠다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.