• 전기학회논문지
• /
• 제57권2호
• /
• pp.235-238
• /
• 2008

This paper explores 28 nm MOSFET design for LSTP(Low Standby Power) applications using TCAD(Technology Computer Aided Design) simulation. Simulated results show that the leakage current of the MOSFET is increasingly dominated by GIDL(Gate Induced Drain Leakage) instead of a subthreshold leakage as the Source/Drain extension doping increases. The GIDL current can be reduced by grading lateral abruptness of the drain at the expense of a higher Source/Drain series resistance. For 28 nm MOSFET suggested in ITRS, we have shown Source/Drain design becomes even more critical to meet both leakage current and performance requirement.

• 대한기계학회논문집A
• /
• 제33권7호
• /
• pp.658-663
• /
• 2009

Eddy current is usually generated in the material with high conductivity by time-varying source such as AC current and also is induced by the moving source with relative velocity. The contactless magnetic brake makes use of the braking force from the eddy current generated by the moving source and currently used for the secondary brakes of heavy trucks, buses and rail vehicles. This study aims to design the magnetization pattern of the eddy current brake system of a permanent magnet type where the design aim is to maximize the braking force. The analysis of brake systems is based on the two-dimensional finite element analysis. We use the sequential linear programming as the optimizer and the adjoint variable method is applied for the sensitivity analysis.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.158-163
• /
• 2013

In this paper, thermal analysis of heatsink for 30 W class Chip-on-Board (COB) LED light source is performed by using SolidWorks Flow Simulation package. In order to increase the convection heat transfer, number of fin and shape of the heatsink is optimized. Furthermore, a copper spread is applied between the COB LED light source and the heatsink to mitigate the heat concentration on the heatsink. With the copper spread, the junction temperature between the COB LED light source and the heatsink is $50.9^{\circ}C$, which is $5.4^{\circ}C$ lower than the heatsink without the copper spread. Due to the improvement of the junction temperature, the light output is improved by 5.8% when the LED light source is stabilized. The temperature difference between the simulation and measured result of the heatsink with the copper spread is within $2^{\circ}C$, which verifies the validity of the thermal design method using a simulation package.

• 한국정밀공학회지
• /
• 제28권12호
• /
• pp.1353-1358
• /
• 2011

LAT(Laser Assisted Turning) is a method that applies a machining process after softening a workpiece in which a preheating process is locally applied to its machining section using laser heat source. LAT shows several advantages, such as high productivity, reduction of manufacturing cost, high quality. Analysis of temperature distribution after preheating for LAT is very difficult due to its very small heat input area and large energy and its movement. Also, the LAT for a square bar is more difficult because the shape of a laser heat source can be changed according to the rotation of the workpiece. In this study, thermal analysis for LAT of square bar was performed using laser heat source projection method. And, the analysis results were compared with the results of the prior study of numerical calculation method. It is thus shown that the proposed method is efficient for the thermal analysis of a shaped bar.

• Radiation Oncology Journal
• /
• 제21권2호
• /
• pp.158-166
• /
• 2003

목적: 본 연구는 새로운 근접치료선원의 이론적 설계를 통해 출력변조를 이용한 혈관내 방사선치료를 제안한다. 대상 및 방법: 제시된 이론적 선원은 기존의 선원과는 달리 선원물질과 차폐물질(스테인리스 스틸, 또는 텅스텐) 둘 다로 구성되며 이는 방위방향으로 비대칭적 방사선량을 제공할 수 있게 한다. 따라서, 방위방향으로 선원의 방향과 체류시간을 조절함으로써 출력변조를 통한 근접치료가 가능해진다. Novoste Beta-Cath system에서 사용하는 Sr-90/Y 전자방출 선원과 유사한 모양의 두 가지 단순화한 선원을 연구의 대상으로 고려하였다. 첫 번째 선원은 선원물질과 차폐물질이 각각 반씩 차지하며, 두 번째 선원은 1/4은 선원물질로, 나머지 3/4은 차폐물질로 구성된다. 두 선원에 대해 방위 및 방사방향으로의 선량분포를 MCNP 몬테 카를로 코드를 이용하여 계산하였다. 결과: 선원이 혈관내의 중심에 위치하지 않게 되는 가상조건에서의 선량 최적화 계산을 시도한 결과, 혈관내벽에 미치는 선량의 최고치와 최저치의 차이가 87$\%$에서 7$\%$까지 줄어들 수 있음을 보였다. 결론: 본 연구에서 제시된 이론적 선원은 선량적 관점에서의 적합성 여부에 관해 매우 고무적인 결과를 보여 줌으로써 출력변조를 통한 혈관내 근접방사선치료의 가능성을 나타내었다. 본 과제의 다음 단계는 굵기가 가는 맥관 내에서 선원의 위치를 파악하여 그를 방위방향으로 정확하게 회전시킬 수 있는 방사선 전달 체계의 개발이라 할 수 있다.

• 원자력산업
• /
• 제6권5호통권39호
• /
• pp.34-39
• /
• 1986

• 패션비즈니스
• /
• 제25권5호
• /
• pp.149-162
• /
• 2021

Nowadays, the cosmetic and fashion industries are paying attention to influencer marketing on Instagram. In this study, we determined whether electronic word of mouth (e-WOM) communications were affected by the following parameters: the influencer's information source, message sidedness, and consumer's regulatory focus. The experimental design of this study is a three-way mixed ANOVA, which comprises of 2 (influencer information source: expert vs general consumer) × 2 (message sidedness: two-sided message vs one-sided message) × 2 (consumer regulatory focus: promotion focus vs prevention focus) structure. The data for this research study was obtained by distributing a questionnaire to 410 subjects. The participants were aged between 20 and 39 years and lived in Seoul and Gyeonggi areas. In total, the data of 396 subjects was analyzed with the help of SPSS 25.0 statistical program: frequency analysis, reliability analysis, t-test, three-way ANOVA, and simple main effect analysis were performed. The analysis results were as follows: First, influencer information sources and consumer regulatory focus exhibited a significant interaction with consumers' e-WOM intentions. Second, message sidedness and consumer's regulatory focus exhibited a significant interaction with e-WOM intentions. Third, influencer information source and message sidedness exhibited a significant interaction with consumers' e-WOM intentions. Based on these findings, the type of influencer's information source and the consumer's regulatory focus was taken into consideration while marketing cosmetics on Instagram. Moreover, influencer marketing strategies must be used to evaluate message sidedness. This would help us gauge the consumer's attitude towards advertisements.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.271-271
• /
• 2012

Many studies have been investigated on high density plasma source (Electron Cyclotron Resonance, Inductively Coupled Plasma, Helicon plasma) for large area source after It is announced that productivity of plasma process depends on plasma density. In this presentation, we will propose the new concept of the multiple source, which consists of a parallel connection of ICP sources and helicon plasma sources. For plasma uniformity, equivalent power (especially, equivalent current in ICP & Helicon) should distribute on each source. We design power feeding line as coaxial transmission line with same length of ground line in each source for equivalent power distribution. And we confirm the equivalent power distribution with simulation and experimental result. Based on basic study, we develop the plasma source for oxidation in semiconductor process. we will discuss the relationship between the processing parameters (With or WithOut magnet, operating pressure, input power ). In ICP, plasma density uniformity is uniform. In ICP with magnet (or Helicon) plasma density is not uniform. As a result, new design (magnet arrangement and gas distributor and etc..) are needed for uniform plasma density in ICP with magnet and Helicon.

• 방사성폐기물학회지
• /
• 제8권3호
• /
• pp.239-245
• /
• 2010

2009년말 기준으로 11,811 다발의 경수로 사용후핵연료가 방출되었으며, 지금까지 각 사용후핵연료에 대해 방사선원항을 가중하여 설계에 반영하기는 사실상 불가능하여, 원자력 관련시설 설계시 보수성을 갖는 기준 사용후핵연료를 선정하고 이를 바탕으로 시스템 설계를 수행하여 왔다. 방사선원항에 대한 단순모델을 적용하면 각 사용후핵연료에 대한 방사선원항을 가중함으로써 이와 같은 보수성을 배제할 수 있으므로 본 연구에서 웨스팅하우스형 원전에 사용된 사용후핵연료를 대상으로 방사선원항, 즉, 붕괴열, 방사능세기, 섭취위해도 등을 예측하기 위한 회귀모형을 개발하였다. 개발된 회귀식을 통해 예측된 방사선원항값은 ORIGEN-ARP 코드로 계산된 값과 약 5% 이내에서 잘 일치함을 확인하였으며, 이의 유용성을 검토한 결과 각각의 사용후핵연료에 대한 방사선원항을 가중하여 설계에 반영하면 보수성을 줄일 수 있음을 확인하였다. 따라서 본 연구에서 개발된 회귀식은 사용후핵연료의 저장 및 처분과 관련한 원자력시설 설계시 개념설계 단계에서 유용하게 사용될 수 있을 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.333-336
• /
• 2001

This paper reports that the Lambert W function applies to a non-iterative design of minimum mean square-error scalar quantizers for a Laplacian source. The contribution of the paper is in the reduction of the time needed for the design and the increased accuracy in resulting quantization points and thresholds, because the algorithm is non-iterative and the Lambert W function can be evaluated as accurately as desired.