• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.332-340
• /
• 2017

This study aims to propose a new optimization-based approach for design and analysis of the stand-alone hybrid energy supply system using renewable energy sources (RES). In the energy supply system, we include multiple energy production technologies such as Photovoltaics (PV), Wind turbine, and fossil-fuel-based AC generator along with different types of energy storage and conversion technologies such as battery and inverter. We then select six different regions of Korea to represent various characteristics of different RES potentials and demand profiles. We finally designed and analyzed the optimal RES stand-alone energy supply system in the selected regions using multiobjective optimization (MOOP) technique, which includes two objective functions: the minimum cost and the minimum $CO_2$ emission. In addition, we discussed the feasibility and expecting benefits of the systems by comparing to conventional systems of Korea. As a result, the region of the highest RES potential showed the possibility to remarkably reduce $CO_2$ emissions compared to the conventional system. Besides, the levelized cost of electricity (LCOE) of the RES-based energy system is identified to be slightly higher than conventional energy system: 0.35 and 0.46 $/kWh, respectively. However, the total life-cycle emission of $CO_2$ ($LCE_{CO2}$) can be reduced up to 470 g$CO_2$/kWh from 490 g$CO_2$/kWh of the conventional systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제18권5호
• /
• pp.708-720
• /
• 1993

The new preventive control mechanisms for traffic management in BISDN/ATM networks can be divided into Connection Admission Control(CAC), Usage Parameter Control (UPC), and Priority Control. Of these mechanism, Usage Parameter Control continuously monitors the parameters admitted in the network's entry point to guarantee quality of service of connections already admitted. Upon detecting traffic that violates the negotiated parameter, it takes the necessary control measures to prevent congestion. Among these traffic control methods, this paper focuses on the Usage Parameter Control method, and proposes and designs GRACE-LB(Guaranteed Rate Acceptance & Control Element-using Leaky Bucket) which improves upon existing UPC models. GRACE-LB modifies the previous LB model by eliminating the cell buffer, dividing the token Pool into two pools, Long-term pool, Short-term pool, and changing the long-term token generating form using 'Cycle Token' into the same bursty form as the traffic source. Through this, GRACE-LB achieves effective control of the Average Bit Rate(ABR) and burst duration of bursty multimedia traffic which previous LB models found difficult to control. Also, since GRACE-LB can e implemented using only simple operations and there are no cell buffers in it, it has the merit of being easily installed at any place.

• Korean Journal of Construction Engineering and Management
• /
• 제16권1호
• /
• pp.119-128
• /
• 2015

Domestic dominant method in subcontract cost estimate for comprehensive program management is estimation by referencing similar cases or relying on the experience and expertise of the engaged. However, this method is not reliable due to lack of accuracy, making it harder for clients to plan and budget the program. Since budget itself is roughly estimated, it becomes a source of cost rise in the course of management due to design modifications. Therefore, the client and service providers shall calculate more accurate service cost by applying objective and scientific method in order to minimize cost rise and cost related dispute. Traditional cases, in estimating program management cost, took Top-Down approach based on precedents and experience. On the contrary, this study will categorize management structure into phases and activities, issue WBS for each phase to estimated schedule and cost for each code, and take Bottom-UP approach. By taking this approach named ICEP (Integrated Cost Estimate based on Project), Set project typical model will be developed for service cost estimating, calculate cost by applying project-specific factors. Also, by analyzing progress data and allocated management cost to complement them, more efficient construction management will take shape based on program management cost standards which reflect project-specific features.

• Journal of the Korea Concrete Institute
• /
• 제20권3호
• /
• pp.405-412
• /
• 2008

Six alkali-activated (AA) concrete mixes were tested to explore the significance and limitations of developing an environmental friendly concrete. Ground granulated blast-furnace slag and powder typed sodium silicate were selected as source material and an alkaline activator, respectively. The main parameter investigated was the replacement level of lightweight fine aggregate to the natural sand. Workability and mechanical properties of lightweight AA concrete were measured: the variation of slump with time, the rate of compressive strength development, the splitting tensile strength, the moduli of rupture and elasticity, the stress-strain relationship, the bond resistance and shrinkage strain. Test results showed that the compressive strength of lightweight AA concrete sharply decreased when the replacement level of lightweight fine aggregate exceeded 30%. In particular, the increase in the discontinuous grading of lightweight aggregate resulted in the deterioration of the mechanical properties of concrete tested. The measured properties of lightweight AA concrete were also compared, wherever possible, with the results obtained from the design equations specified in ACI 318-05 or EC 2, depending on the relevance, and the results predicted from the empirical equations proposed by Slate et al. for lightweight ordinary Portland cement concrete. The stress-strain curves of different concrete were compared with predictions obtained from the mathematical model proposed by Tasnimi. The measured mechanical properties of lightweight AA concrete generally showed little agreement with the predictions obtained from these equations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.91-105
• /
• 2016

Carbon Nanotube Field-Effect Transistors (CNTFETs) have been studied as candidates for post Si CMOS owing to the better electrostatic control and high mobility. To enhance the immunity against short - channel effects (SCEs), the novel channel and gate engineered architectures have been proposed to improve CNTFETs performance. This work presents a comprehensive study of the influence of channel and gate engineering on the CNTFET switching, high frequency and circuit level performance of carbon nanotube field-effect transistors (CNTFETs). At device level, the effects of channel and gate engineering on the switching and high frequency characteristics for CNTFET have been theoretically investigated by using a quantum kinetic model. This model is based on two-dimensional non-equilibrium Green's functions (NEGF) solved self - consistently with Poisson's equations. It is revealed that hetero - material - gate and lightly doped drain and source CNTFET (HMG - LDDS - CNTFET) structure can significantly reduce leakage current, enhance control ability of the gate on channel, improve the switching speed, and is more suitable for use in low power, high frequency circuits. At circuit level, using the HSPICE with look - up table(LUT) based Verilog - A models, the impact of the channel and gate engineering on basic digital circuits (inverter, static random access memory cell) have been investigated systematically. The performance parameters of circuits have been calculated and the optimum metal gate workfunction combinations of ${\Phi}_{M1}/{\Phi}_{M2}$ have been concluded in terms of power consumption, average delay, stability, energy consumption and power - delay product (PDP). In addition, we discuss and compare the CNTFET-based circuit designs of various logic gates, including ternary and binary logic. Simulation results indicate that LDDS - HMG - CNTFET circuits with ternary logic gate design have significantly better performance in comparison with other structures.

• Journal of Radiation Protection and Research
• /
• 제37권1호
• /
• pp.10-15
• /
• 2012

Design and performance test results of a newly developed optically stimulated luminescence (OSL) measurement system are presented in this paper. Generally, different types of optical filters are used in OSL reader system to minimize the interference of the stimulation light in the OSL signal. For optically stimulation of $Al_2O_3:C$, we have arrived at an optimal combination of the filters, i.e., GG420 filter for filtering the stimulating light source, and a combined UG11 and BG39 filter at the detecting window (PMT). By using a high luminance blue LED (Luxeon V), sufficient luminous intensity could be obtained for optically stimulation. By using various control boards, the OSL reader device was successfully interfaced with a personal computer. A software was developed to deliver required commands to operate the OSL reader by using the LabView program (National Instruments, Inc.). In order to evaluate the reliability and the reproducibility of newly designed-OSL reader. Performance testing of the OSL reader was carried out for OSL efficiency, OSL decay curve and signal to noise ratio of the standard $Al_2O_3:C$ OSL material. It was found to be comparable with that of commercial Riso reader system.

• Journal of Radiation Protection and Research
• /
• 제37권1호
• /
• pp.1-9
• /
• 2012

A year has passed since the nuclear power plant accident in Fukushima on March 11, 2011, and a survey for public perception on radiation by Korean people has been made. The methodological design was based on a quantitative survey and a frequency analysis was done. The analysis objects were survey papers (n=2,754pcs) answered by random ordinary citizens chosen from all over the country. The questionnaires, and study tool, were directly distributed and collected. A total of 40 questionnaires using a coefficient of Cronbach's ${\alpha}$ per each area was 'self perception of radiation' (0.620), 'radiation risk' (0.830), 'benefit from radiation' (0.781), 'radiation controlled' (0.685), 'informative source of radiation' (0.831), 'influence degree from Fukushima accident' (0.763), showing rather high score from all areas. As the result of the questionnaires, the knowledge of radiation concept was 69.50 out of 100 points, which shows a rather significant difference from the result of 'know well about radiation' (53.7%) and 'just know about radiation' (37.40%). According to the survey, one of the main reasons why radiation seems risky was that once exposed to radiation, it may not have negative impacts presently but, the next generation could see negative impacts (66.1%). About 41% of our respondents showed a negative position against the government's report on radiation while 39.5% of respondents said that we should stop running nuclear power in light of Fukushima nuclear power plant accident. This study was done for the first time by Korean people's public perception on radiation after the Fukushima nuclear power plant accident. We expect this might have significant contributions to the establishment of the government's policy on radiation.

• Spatial Information Research
• /
• 제9권1호
• /
• pp.107-124
• /
• 2001

The purpose of this research is to develop system and to establish methodology for managing spatial Database in Land Management Information System(LMIS). Spatial Database which is used by a various public department such as parcel survey and registry, land use planning and Land value appraisal in local government, is composed of parcel map, topographic map and zoning map. Spatial data has been constructed and managed by various department and then hard to maintain accuracy and coinsistency. So, it is important to establish the basic data management concept that source data(ex : parcel map, topographic map, zoning map, etc.) should be managed by responsible department. at the same time, application data for bussiness (ex : individual parcel price map) must be recomposed from base map by it's own objects. This is, Spatial data management system (SDMS) should be designed, developed according to this concept for managing consistency among data, reducing construction and management cost of database. Our SDMS was developed based on Open LMIS middleware architecture using OpenGIS CORBA specification for standard interface, RUP(Rational Unified Process) for development methodology, UML(Unified Modeling Language) for system design and VisiBroker, C++, CAD system for system implementation.

• Journal of the Korean Society of Radiology
• /
• 제9권5호
• /
• pp.295-300
• /
• 2015

There are various type of particle accelerators such as Kyoungju 100-MeV proton beam accelerator in Korea. And Korea plans to build large particle accelerator such as heavy ion accelerator and 4th generation light source facility. The accelerated high energy particles of these facility produce 2nd neutron after nuclear reaction with target materials. And then these 2nd neutron activate structural materials and surrounding environment. Accordingly, it is important to consider the activation and shielding calculation on design of facility for safety operation. In this study, we tried to calculate and compare the neutron flux from the interaction $^{la}150$ beam with target material(Cu) according to thickness of iron and concrete shielding material by MCNPX 2.7 with nuclear library JENDL/HE 07and la150. To verify the properties of nuclear library, we compared computational results with experimental value. These results can be used for dose evaluation technology in planning of the shielding of large particle accelerator.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제35권5호
• /
• pp.291-298
• /
• 2015

An array type probe for monitoring metal tubes is proposed in this paper which utilizes peak value and peak time of a pulsed eddy current(PEC) signal. The probe consists of an array of encircling coils along a tube and the outside of coils is shielded by ferrite to prevent source magnetic fields from directly affecting sensor signals since it is the magnetic fields produced by eddy currents that reflect the condition of metal tubes. The positions of both exciter and sensor coils are consecutively moved automatically so that manual scanning is not necessary. At one position of send-receive coils, peak value and peak time are extracted from a sensor PEC signal and these data are accumulated for all positions to form an array type peak value signal and an array type peak time signal. Numerical simulation was performed using the backward difference method in time and the finite element method for spatial analysis. Simulation results showed that peak value increases and the peak appears earlier as the defect depth or length increases. The proposed array signals are shown to be excellent in reflecting the defect location as well as variations of defect depth and length within the array probe.