• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.173-181
• /
• 2021

Reinforced concrete structures are exposed to various environments, resulting in reinforcement corrosion due to moisture and ions penetration. Reinforced concrete corrosion causes a decrease in the durability performance of reinforced concrete structures. One solution to mitigate such issues is using FRP rebars, which offer several advantages such as high tensile strength, corrosion resistance, and light-weight than conventional rebars, in reinforced concrete instead of conventional steel rebars. The FRP rebar used should be examined at the limit state because FRP reinforced concrete has linear behavior until its fracture and can generate excessive deflection due to the low elastic modulus. It should be considered while designing FRP reinforced concrete for flexure. In the ultimate limit state, the flexural strength of FRP reinforced concrete as per ACI 440.1R is significantly lower than the flexural strength by applying both the environmental reduction and strength reduction factors accounting for the material uncertainty of FRP rebar. Therefore, in this study, the experimental results were compared with the deflection of the proposed effective moment of inertia referring to the local and international standards. The experimental results of GFRP and BFRP reinforced concrete were compared with the flexural strength as determined by ACI 440.1R and Fib bulletin 40. The flexural strength obtained by the experimental results was more similar to that obtained by Fib bulletin 40 than ACI 440.1R. The flexural strength of ACI 440.1R was conservatively evaluated in the tension-controlled section.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.499-509
• /
• 2022

This study was conducted to understand the effect of health assessment practical education on class participation, problem-solving process, academic self-efficacy, and academic achievement of nursing students. This study used a nonequivalent control group pretest-posttest design. The participants were 69 nursing university students located in C city. Data were collected on two separate occasions before and after the application of the program from February 2021 to July 2021. Data were analyzed by chi-square test, independent t-test, and ANCOVA using SPSS WIN 23.0. There were significant differences in class participation(F=15.003, p<.001), academic self-efficacy(F=13.288, p=.001) and academic achievement(F=19.755, p<.001) between the experimental group and the control group. In the problem-solving process, the experimental group was significantly higher than the control group in decision-making(F=6.948, p=.010), applying the solution(F=6.232, p=.015) and evaluation-reflection(F=5.364, p=.024). It is necessary to expand case-based learning to increase the problem-solving process, class participation, academic self-efficacy, and academic achievement of nursing students.

• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.168-176
• /
• 2022

Purpose: This study was done to examine the effects of the SNS Gratitude Diary Program during the COVID-19 period on grateful disposition, job satisfaction and life satisfaction of medical institution workers. Methods: The study was a nonequivalent control group pre-post test design. The participants were 58 medical institution workers of which 28 were assigned to the experimental group and 30 to the control group. Data were collected from June 3 to August 10, 2020 and analyzed using SPSS Win 18.0 version program. The intervention was conducted 5 times a week for 8 weeks. Results: There were significant differences in reported grateful disposition between the two groups. However, the issue of job satisfaction and life satisfaction were not significant. Conclusion: The SNS Gratitude Diary Program using SNS during the COVID-19 period can be utilized as an effective intervention for grateful disposition. It will be a good solution to lead successful psychological health management.

• Knowledge Management Research
• /
• v.23 no.2
• /
• pp.15-35
• /
• 2022

With the development of virtual and augmented reality technologies, the metaverse, a digital world that provides an immersive feeling like the real world, is overgrowing. Many IT companies such as Naver, Facebook (Meta), and NVIDIA are developing innovative technologies and launching the Metaverse platform and related products on the market. However, even though it is a new business in which many global big tech companies are aggressively investing, the results are not yet precise compared to the market expectations, and the rate of increase in the number of users is gradually slowing down. This can be attributed to the lack of consideration and understanding about how to grow the metaverse ecosystem and operate & harmonize various users/components from the time the metaverse platform was designed. In order to propose a better solution to these problems, this study adopts the yin-yang and five elements theory, which was created to understand the operation logic and logic of the human world for thousands of years. This research would like to propose a theory of double lines-five elements by defining two essential spaces of the metaverse platform, online and offline, and five essential elements constituting the metaverse platform. This study intends to provide a theoretical lens on how to design and operate a platform through the double lines and five elements theory and the concept of coexistence and polarity between the five elements.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.3
• /
• pp.263-285
• /
• 2022

This study presented the factor analysis on constructing the new factors affecting the middle school students' online learning behaviors from the questionnaires employed among middle school students. A total of 204 students participated and the data were collected in South Korea. The sample of middle school ninth-grade students was selected and used through purposive sampling. Findings from the factor analysis provided evidence for the eight-factor solution for the 35-items accounting for 66.15% of the shared variance. A wide range of factors has been considered to identify students' online learning behaviors. The appropriate experience and use of e-learning in the middle school period is also important as it will be a critical stepstone for future education. This research provides information that has been taken into account for advancing online learning to enhance the quality of e-learning systems for middle school students. The study results provided eight new factors affecting the middle school students' online learning behaviors; that is 1) communication using social media as a learning tool, 2) intention to share information using ICT, 3) addiction of technology, 4) adoption of technology, 5) seeking information using ICT, 6) use of social media learning, 7) information search using ICT, and 8) immersion of technology. This study confirmed that middle school students prefer communication using social media as a learning tool, and value intention to share information using ICT for the most part. The data obtained based on factor analysis can highlight the online learning behaviors towards a mixture of social media learning and ICT to ensure a new educational platform for the future of e-learning. This research expects to be useful for both middle schools of online learning to better understand students' online learning behaviors and design online learning environments and information professionals to better assist students who particularly need digital literacy.

• Membrane and Water Treatment
• /
• v.14 no.3
• /
• pp.129-140
• /
• 2023

The appropriate injection of H₂O₂ is essential to produce hydroxyl radicals (OH·) by mixing H₂O₂ quickly and exposing the resulting H₂O₂ solution to UV irradiation. This study focused on evaluating mixing device of H₂O₂ as a design factor of UV/H₂O₂ AOP pilot plant using a surface water. The experimental investigation involved both experimental and model-based analyses to evaluate the mixing effect of different devices available for the H₂O₂ injection of a tubular hollow pipe, elliptical type of inline mixer, and nozzle-type injection mixer. Computational fluid dynamics analysis was employed to model and simulate the mixing devices. The results showed that the elliptical type of inline mixer showed the highest uniformity of 95%, followed by the nozzle mixer with 83%, and the hollow pipe with only 18%, after passing through each mixing device. These results indicated that the elliptical type of inline mixer was the most effective in mixing H₂O₂ in a bulk. Regarding the pressure drops between the inlet and outlet of pipe, the elliptical-type inline mixer exhibited the highest pressure drop of 15.8 kPa, which was unfavorable for operation. On the other hand, the nozzle mixer and hollow pipe showed similar pressure drops of 0.4 kPa and 0.3 kPa, respectively. Experimental study showed that the elliptical type of inline and nozzle-type injection mixers worked well for low concentration (less than 5mg/L) of H₂O₂ injection within 10% of the input value, indicating that both mixers were appropriate for required H₂O₂ concentration and mixing intensity of UV/ H₂O₂ AOP process. Additionally, the elliptical-type inline mixer proved to be more stable than the nozzle-type injection mixer when dealing with highly concentrated pollutants entering the UV/H₂O₂ AOP process. It is recommended to use a suitable mixing device to meet the desired range of H₂O₂ concentration in AOP process.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.1
• /
• pp.25-35
• /
• 2023

Considering the non-linear behavior of structure and soil when evaluating a nuclear power plant's seismic safety under a beyond-design basis earthquake is essential. In order to obtain the nonlinear response of a nuclear power plant structure, a time-domain SSI analysis method that considers the nonlinearity of soil and structure and the nonlinear Soil-Structure Interaction (SSI) effect is necessary. The Boundary Reaction Method (BRM) is a time-domain SSI analysis method. The BRM can be applied effectively with a Perfectly Matched Layer (PML), which is an effective energy absorbing boundary condition. The BRM has a characteristic that the magnitude of the response in far-field soil increases as the boundary interface of the effective seismic load moves outward. In addition, the PML has poor absorption performance of low-frequency waves. For this reason, the accuracy of the low-frequency response may be degraded when analyzing the combination of the BRM and the PML. In this study, the accuracy of the analysis response was improved by adjusting the PML input parameters to improve this problem. The accuracy of the response was evaluated by using the analysis response using KIESSI-3D, a frequency domain SSI analysis program, as a reference solution. As a result of the analysis applying the optimal PML parameter, the average error rate of the acceleration response spectrum for 9 degrees of freedom of the structure was 3.40%, which was highly similar to the reference result. In addition, time-domain nonlinear SSI analysis was performed with the soil's nonlinearity to show this study's applicability. As a result of nonlinear SSI analysis, plastic deformation was concentrated in the soil around the foundation. The analysis results found that the analysis method combining BRM and PML can be effectively applied to the seismic response analysis of nuclear power plant structures.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4571-4584
• /
• 2022

The analysis of rapid flow transients in Reactor Coolant Pumps (RCP) is essential for a reactor safety study. An accurate and precise analysis of the RCP coastdown is necessary for the reactor design. The coastdown of RCP affects the coolant temperature and the colloidal crud in the primary coolant. A realistic and kinetic model has been used to investigate the behavior of activated colloidal crud in the primary coolant and steam generator that solves the pump speed analytically. The analytic solution of the non-dimensional flow rate has been determined by the energy ratio β. The kinetic energy of the coolant fluid and the kinetic energy stored in the rotating parts of a pump are two essential parameters in the form of β. Under normal operation, the pump's speed and moment of inertia are constant. However, in a coastdown situation, kinetic damping in the interval has been implemented. A dynamic model ACCP-SMART has been developed for System Integrated Modular and Advanced Reactor (SMART) to investigate the corrosion due to activated colloidal crud. The Fickian diffusion model has been implemented as the reference corrosion model for the constituent component of the primary loop of the SMART reactor. The activated colloidal crud activity in the primary coolant and steam generator of the SMART reactor has been studied for different equilibrium corrosion rates, linear increase in corrosion rate, and dynamic RCP coastdown situation energy ratio b. The coolant specific activity of SMART reactor equilibrium corrosion (4.0 mg s^-1) has been found 9.63×10^-3 µCi cm^-3, 3.53×10^-3 µC cm^-3, 2.39×10^-2 µC cm^-3, 8.10×10^-3 µC cm^-3, 6.77× 10^-3 µC cm^-3, 4.95×10^-4 µC cm^-3, 1.19×10^-3 µC cm^-3, and 7.87×10^-4 µC cm^-3 for ²⁴Na, ⁵⁴Mn, ⁵⁶Mn, ⁵⁹Fe, ⁵⁸Co, ⁶⁰Co, ⁹⁹Mo, and ⁵¹Cr which are 14.95%, 5.48%, 37.08%, 12.57%, 10.51%, 0.77%, 18.50%, and 0.12% respectively. For linear and exponential coastdown with a constant corrosion rate, the total coolant and steam generator activity approaches a higher saturation value than the normal values. The coolant and steam generator activity changes considerably with kinetic corrosion rate, equilibrium corrosion, growth of corrosion rate (ΔC/Δt), and RCP coastdown situations. The effect of the RCP coastdown on the specific activity of the steam generators is smeared by linearly rising corrosion rates, equilibrium corrosion, and rapid coasting down of the RCP. However, the time taken to reach the saturation activity is also influenced by the slope of corrosion rate, coastdown situation, equilibrium corrosion rate, and energy ratio β.

• Composites Research
• /
• v.19 no.5
• /
• pp.28-33
• /
• 2006

In this paper, we have studied the complex permittivities and their influence on the design of microwave absorbers of E-glass fabric/epoxy composite laminates containing three different types of carbon-based nano conductive fillers such as carbon black (CB), carbon nano fiber (CNF) and multi-wall nano tube (MWNT). The measurements were performed fur permittivities at the frequency band of 0.5 GHz$\sim$18.0 GHz using a vector network analyzer with a 7 mm coaxial air line. The experimental results show that the complex permittivities of the composites depend strongly on the natures and concentrations of the conductive fillers. The real and imaginary parts of the complex permittivities of the composites were proportional to the filler concentrations. But, depending on the types of fillers and frequency band, the increasing rates of the real and imaginary parts with respect to the filler concentrations were all different. These different rates can have an effect on the thickness in designing the single layer microwave absorbers. The effect of the different rates at 10 GHz was examined by using Cole-Cole plot; the plot is composed of a single layer absorber solution line and measured permittivities from these three types of composites. Single layer absorbers of 3 different thicknesses using carbon nano materials were fabricated and the -10 dB band of absorbing performances were all about 3 GHz.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.467-475
• /
• 2009

Existing studies have suggested Universal Curve only for supplemental damping by damper. Therefore net damping has been determined by means of arithmetic summation between intrinsic, aero-damping of cable and supplemental damping of damper. However linear combination approach by means of the arithmetic summation is not enough theoretical background. So validity of this approach should be verified in order to design adequate cable-damper system by engineers. This study establishes governing differential equation which can consider intrinsic, aero-damping and supplemental damping as well. And also analysis method is solved by combination of muller method and successive iteration method. Consequently, this study succeeds in verification for validity of linear combination approach. As a result of this study, linear combination approach is limitedly effective in case of low stiffness and optimum damping coefficient of damper, short distance from support to damper, lower vibration mode, low aero-damping, and normal windy environment. Whereas this study will be effective in case of opposite conditions, and existing studies or linear combination approach occur to further error. Meaning of this study presents exact solution for net damping of cable-damper system, and verifies linear combination approach by means of the analysis method. In the future, if monitoring of optimum damping coefficient of a damper against aero-damping is feasible on time, algorithm of this study will be available for control of cable and semi-active damper system such as magneto-rheological damper.