• 한국산학기술학회논문지
• /
• 제3권1호
• /
• pp.10-19
• /
• 2002

본고는 다종, 소규모 회분식 공정 또는 공장을 수학적 프로그래밍 기법으로 최적 설계하는 방법에 대한 것이다. 제안된 일반 회분식 공장문제는 Papageorgaki와 Reklaitis에 의해 혼합정수비선형식(MINLP)으로 수립된 것인데, 최적해답을 보장하며 공장의 확장 등 불확실성을 고려하여 선형화 한 후(MILP) 푸는 방법론이 제시되었다. Bende식 문제분할 방식을 개조하여 몇가지 예제에 대한 풀이를 제시하였다. IBM의 OSL 최적화 패키지를 이용하였고 MILP를 직접 푸는 경우보다 계산시간을 크게 단축할 수 있었다.

• 패션비즈니스
• /
• 제17권2호
• /
• pp.151-163
• /
• 2013

In this research, with a goal of lessening the damage to hair by adding rose hip extract to permanent wave 1 solution and performing permanent wave procedure prior to acid dyeing and maximizing the effect of the procedure, rose hip extract 15%, 20% was added to each thioglycolate 1 solution and cysteine 1 solution and the procedure was performed. As a result, when performing the procedure by adding rose hip extract to permanent wave 1 solution thioglycolate and cysteine permanent wave 1 solution, the effect of wave effectiveness is increased and the damage to hair was confirmed to be low. Depending on the rose hip additive status in thioglycolate, the treatment effect of hair was shown to be beneficial. However, the limit of this research is that the thickness of hair strands for each person differs as well as the location of the hair contributing to the difference and therefore exact judgement regarding the shape of waves as well as the level of damage cannot be fully measured. In the following clinical tests, we will test the procedure on variety of hair types.

• Structural Engineering and Mechanics
• /
• 제76권4호
• /
• pp.451-463
• /
• 2020

In this paper, a new semi-analytical solution for estimating the pull-in parameters of electrically actuated functionally graded (FG) nanobeams is proposed. All the bulk and surface material properties of the FG nanoactuator vary continuously in thickness direction according to power law distribution. Here, the modified couple stress theory (MCST) and Gurtin-Murdoch surface elasticity theory (SET) are jointly employed to capture the size effects of the nanoscale beam in the context of Euler-Bernoulli beam theory. According to the MCST and SET and accounting for the mid-plane stretching, axial residual stress, electrostatic actuation, fringing field, and dispersion (Casimir or/and van der Waals) forces, the nonlinear nonclassical equation of motion and boundary conditions are obtained derived using Hamilton principle. The proposed semi-analytical solution is derived by employing Galerkin method in conjunction with the Particle Swarm Optimization (PSO) method. The proposed solution approach is validated with the available literature. The freestanding behavior of nanoactuators is also investigated. A parametric study is conducted to illustrate the effects of different material and geometrical parameters on the pull-in response of cantilever and doubly-clamped FG nanoactuators. This model and proposed solution are helpful especially in mechanical design of micro/nanoactuators made of FGMs.

• Earthquakes and Structures
• /
• 제16권1호
• /
• pp.1-9
• /
• 2019

To provide a simplified method for the base isolation design of LNG tanks, such as $16{\times}104m^3$ LNG tanks, we conducted a derivation and calculation example analysis of the dynamic response of the base isolation of LNG storage tanks, using dynamic response analysis theory with consideration of pile-soil interaction. The ADINA finite element software package was used to conduct the numerical simulation analysis, and compare it with the theoretical solution. The ground-shaking table experiment of LNG tank base isolation was carried out simultaneously. The results show that the pile-soil interaction is not obvious under the condition of base isolation. Comparing base isolation to no isolation, the seismic response clearly decreases, but there is less of an effect on the shaking wave height after adopting pile top isolation support. This indicates that the basic isolation measures cannot control the wave height. A comparison of the shaking table experiment with the finite element solution and the theoretical solution shows that the finite element solution and theoretical solution are feasible. The three experiments are mutually verified.

• 전자공학회논문지A
• /
• 제31A권3호
• /
• pp.77-86
• /
• 1994

A New environment SENSATION for circuit optimization and statistical analysis has been developed. It provides real time simulation and includes automatic algorithms to assist for reaching optimal solution. Furthermore, statistical analysis environment is presented which aids in Monte Carlo analysis. worst case corner analysis, and sensitivity analysis. These capabilities faciliate the characterization of the effects of several operating conditions and manufacture process paramenters on the design performances. We verify that the proposed methods can obtain the optimal solution of the objective function through several experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.316-320
• /
• 1993

Electromagnetic suspension (E.M.S) type levitation system is studied in the control system design viewpoint. Dynamic characteristics in theoretical analysis as well as hardware implementation is considered. Open loop unstable, non-linear and timevarying characteristics are reviewed in the theoretcal section, while levitation control system for multi-vehicle train as well as magnet drive system is reviewed in the practical section. This paper suggests not only some well-known problem appearing in levitation control system design but also a subtle problem and solution candidates. But there exist many unmentioned problems wating for a smart problem solver.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.178-186
• /
• 1996

This paper proposes a new design technique that can be used for BSB (brain-state-in-a-box) neural networks to realize autoassociative memories. The proposed method is based on the parametrization of solution space and optimization using genetic algorithm. The applicability of the established technique is demonstrated by means of a simulation example, which illustrates its strengths.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권1호
• /
• pp.114-118
• /
• 2002

We introduce a design technique for homogeneous magnets using evolution strategy. The method has several advantages over existing techniques including: it allows complete flexibility in geometric constraints on the shape of both the coil and the homogeneous volume; it guarantees a globally optimal solution, and it automatically searches the minimum number of coils that satisfies given constraints.

• Communications for Statistical Applications and Methods
• /
• 제7권1호
• /
• pp.357-370
• /
• 2000

This study has adapted a genetic algorithm for an optimal design for the first time. the models that was used a simulation are the first and second order response surfaces model, Using an genetic algorithm in D-opimal it is more efficient than previous algorithms to get an object function. Not like other algorithm without any restrictions like troublesome about the initial solution not falling into a local optimal solution it's the most suitable algorithm.

• Steel and Composite Structures
• /
• 제12권6호
• /
• pp.541-548
• /
• 2012

This paper deals with the applicability of extended layerwise optimization method (ELOM) for frequency optimization of laminated composite plates. The design objective is the maximization of the fundamental frequency of the laminated plates. The fibre orientations in the layers are considered as design variables. The first order shear deformation theory (FSDT) is used for the finite element solution of the laminates. Finally, the numerical analysis is carried out to show the applicability of extended layerwise optimization algorithm of laminated plates for different parameters such as plate aspect ratios and boundary conditions.