• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.103-108
• /
• 2004

This paper will describe integrated system design process and its application. Integrated design process is performed activities concurrently and sequentially for product development. For a group of activities to be truly integrated, the flow of deliverables among them must be well defined, and committed to. For this purpose, the study will suggest procedure that is executed context analysis of standard process, interface definition from activity decomposition, integration of related activities, and definition of concurrency & sequential activities flow, This procedure and method will contribute to minimize time loss that is emerged from activities iteration by not definitely definition of activities interface.

• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.1056-1067
• /
• 1987

This paper presents a design procedure for building block integrated circuits that is based on the digraph relaxation model. A set of optimization procedure is prosented for a minimum area and routing-fecsible placement of IC building blocks. Chip area optimization is subject to perimeter and area constraints on the component rectangles in the dissection.

• 한국지진공학회논문집
• /
• 제28권1호
• /
• pp.11-20
• /
• 2024

The ductility of the system based on the capacity of each structural member constituting the seismic force-resisting system is a significant factor determining the structure's seismic performance. This study aims to provide a procedure to supplement the current seismic design criteria to secure the system's ductility and improve the seismic performance of the steel ordinary moment frames. For the study, a nonlinear analysis was performed on the 9- and 15-story model buildings, and the formation of collapse mechanisms and damage distribution for dynamic loads were analyzed. As a result of analyzing the nonlinear response and damage distribution of the steel ordinary moment frame, local collapse due to the concentration of structural damage was observed in the case where the influence of the higher mode was dominant. In this study, a procedure to improve the seismic performance and avoid inferior dynamic response was proposed by limiting the strength ratio of the column. The proposed procedure effectively improved the seismic performance of steel ordinary moment frames by reducing the probability of local collapse.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.964-966
• /
• 2002

This paper presents a magnet circuit design procedure to reduce mover mass of the moving coil type linear direct motor (LDM). The procedure of optimization is based on the response surface methodology (RSM) and Sequential Quadratic Problem (SQP). This procedure of optimization is verified by the comparison of the result of the initial design between the result of the optimum design.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.269-277
• /
• 2000

This paper describes a seismic design procedure for steel moment connections with welded straight haunch. Recent test results showed that welding a straight haunch beneath the beam could be a viable solution for not only repair and rehabilitation of pre-Northridge moment connections but also new construction. Although a design procedure for the connection with triangular welded haunch has been developed recently, it is not applicable for the straight haunch moment connection because the force transfer mechanism is different. A simplified analytical model that considers the force interaction and deformation compatibility between the beam and haunch is briefly presented first based on the writer`s previous study. A generic design procedure as well as details that minimize the stress concentration at the haunch tip are also recommended.

• Earthquakes and Structures
• /
• 제1권1호
• /
• pp.129-146
• /
• 2010

This paper proposes an approximate procedure to estimate seismic displacement capacity - defined as yield displacement times the displacement ductility - of piles in marine oil terminals. It is shown that the displacement ductility of piles is relatively insensitive to most of the pile parameters within ranges typically applicable to most piles in marine oil terminals. Based on parametric studies, lower bound values of the displacement ductility of two types of piles commonly used in marine oil terminals - reinforced-concrete and hollow-steel - with either pin connection or full-moment-connection to the deck for two seismic design levels - Level 1 or Level 2 - and for two locations of the hinging in the pile - near the deck or below the ground - are proposed. The lower bound values of the displacement ductility are determined such that the material strain limits specified in the Marine Oil Terminal Engineering and Maintenance Standard (MOTEMS) are satisfied at each design level. The simplified procedure presented in this paper is intended to be used for preliminary design of piles or as a check on the results from the detailed nonlinear static pushover analysis procedure, with material strain control, specified in the MOTEMS.

• Transactions on Electrical and Electronic Materials
• /
• 제17권6호
• /
• pp.369-374
• /
• 2016

This paper presents a design procedure of an integrated inductor with a magnetic core for power converters. This procedure considerably reduces design time and effort. The proposed design procedure is verified by the development of an inductor model dedicated to the monolithic integration of DC-DC converters for portable applications. The numerical simulation based on the FEM (finite elements method) shows that 3D modeling of the integrated inductor allows better estimation of the electrical parameters of the desired inductor. The optimization of the electrical parameter values is based on the numerical analysis of the influence of the geometric parameters on the electrical characteristics of the inductor. Using the VHDL-AMS language, implementation of the integrated inductor in a micro Buck converter demonstrate that simulation results present a very promising approach for the monolithic integration of DC-DC converters.

• 대한전자공학회논문지
• /
• 제24권1호
• /
• pp.123-132
• /
• 1987

In this paper, we studied on the design of elliptic digital filters using the bilinear z transformation method, and proposed a design procedure satisfying prescribed specifications. The magnitude characteristics of digital filters are compared with its of analog filiters by computer simulation. Finaly we considered the quantization effects of digital filters. In cascader realization of fixed-point digital filters under dynamic range constraints, the outpout noise for IIR digital filters depends on the pole-zero pairing and ordering of the second order sections. Therfore an optmization procedure to finding a good ordering and pairing is very desirable. Thus, we proposed a sub-optimization procedure for finding "near optimal" solution.

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.111-117
• /
• 2008

An automation process of filter unit is presented for the application of the assembling procedure and dry furnace work. By that automation procedure, it is expected to enhance working environment such as reducing laboring load, harmful gas, and burning scald. Furthermore, this automation process also minimizes via standardization of manufacturing process so that it may increase productivity and reliability. An automation process of filter unit is presented for the application of the assembling procedure and dry furnace work. Filter automation process also gives a good quality and productivity by simplifying to only one line from the complicated process such as filter cutting$\rightarrow$ adhering$\rightarrow$fabricating in a very small space. It is found that a new conceptual design of dry furnace shows the better quality like uniform heat distribution compared to the conventional design. It is also found that the present design gives a better working environment by adding cooling system.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 봄 학술발표회 논문집
• /
• pp.72-78
• /
• 1991

An improved procedure for earthquake resistant design of multistory building structures is proposed in this study. The effect of gravity load on seismic response of structures is evaluated through nonlinear dynamic analyses of a single story example structure. The presence of gravity load tends to initiate plastic hinge formation in earlier stage of a strong earthquake. However, the effect of gravity load seems to disapper as ground motion is getting stronger. And one of shortcomings in current earthquake resistant codes is overestimation of gravity load effects when earthquake load is applied at the same time so that it may leads to less inelastic deformation or structural damage in upper stories, and inelastic deformation is increased in lower stories. Based on these observation, an improved procedure for earthquake resistant design is derived by reducing the factor for gravity load and inceasing that for seismic load. Structures designed by the proposed design procedure turned out to have increased safety and stability against strong earthquakes.