• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1267-1273
• /
• 2022

Although the Korea shipbuilding industry has recently been receiving most of the orders for ships in the world, production processes are being disrupted due to a shortage of manpower at the production site. This is because the workers quit the shipyard as both work and wages were reduced due to the long slump in the shipbuilding industry. The main reason for the increase in orders was the large-scale orders for Qatar LNG carriers, and the situation in which the technical specifications required for ships are becoming more complex is also working to an advantage. Because the contract delivery time is of utmost importance for ships, the dock launch plan is the most important management item among the shipyard's major processes. The structure to be built in the dock may be a hull that has left the design work or a finished vessel, and in some cases, it is often at the level of some blocks of the hull. When launching, the hull is affected by the hogging or sagging moment due to the fluid force, and securing the safety of the structural strength of the block connection is of utmost importance. In a normal process, the connecting member launches after welding has been completed, but in actual shipbuilders, quick decision-making is needed on the conditions for securing structural safety to comply with the docking schedule. In this study, a detailed analysis method and applicability using a bending stress evaluation method and finite element analysis modelling were analyzed to rationally judge the above-mentioned problems from an engineering point of view. The main contents mentioned in the thesis can be used as good examples when conducting similar structural strength evaluations in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.284-298
• /
• 2022

It is necessary to acquire information on traffic safety facilities installed on the roadways specifically for the operation of autonomous vehicles. The purpose of this study is to prepare a Korean version of an integrated message-set design as a way to provide to autonomous vehicles standardized information on traffic safety facilities. In this study, necessary facilities are classified according to four criteria (no legal basis; not providing information to autonomous vehicles; providing duplicate information; not standardized, and too difficult to generalize) based on information that must be provided to operate autonomous vehicles. The priority of information delivery (gross negligence followed by behavior change) was classified according to the importance of the information to be provided during autonomous driving, and the form was defined for the classification code in the information delivered. Finally, the information location and delivery method of traffic facilities for compliance with SAE J2735 were identified. This study is meaningful in that it provides a plan for roadway operations by suggesting a method for providing information to autonomously driven vehicles.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.57-65
• /
• 2019

This study is a scientific approach to psychological factors such as emotional stability among various effects of forest resources. In order to carry out this study, the experiment was conducted on the subjects by setting the forest healing space as various spaces. The subjects who participated in this experiment were the students in their twenties and the average age was 22±1.25 years. The subjects were assessed for emotional words through subjective sequence evaluation in different designated forest healing spot. In addition, the emotional states that they actually perceived were measured by measuring the bio-signals to their perceived emotions. BMP, SDNN, VLF, LF, HF, Amplitude, and PPI were used for the bio-signal reaction experiment applied to this study. The results of this experiment were measured by Friedman test and Wilcoxon test for statistical analysis. n this study, 'good', 'clear', and 'uncomfortable' words were found statistically significant at the spot of forest healing space for subjective emotional vocabulary. In addition, SDNN, HF and Amplitude were statistically significant in the results of quantitative bio-signal measurement at each spot in the forest healing space. Based on the results of this study, we can suggest the application direction and strategic utilization plan of forest healing spot and forest resource utilization field. This is not only a guide for the users who use the facility through the spatial facilities and physical requirements for the emotion based forest-healing, but also can be used as a personalized emotional space design aspect.

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.1-25
• /
• 2022

This study was conducted for technology development and industrial and enterprise system design for the sustainable life of mankind. Human society is facing a crisis. As the power of mankind has increased due to the development of nuclear weapons and information and communication technologies, the risk of human society has greatly increased. The value of growth and freedom is increasing due to capitalism and democratic systems, so technological innovation is accelerating, and industries and companies are growing significantly. New technologies and industries can greatly develop human society and put it at risk. This study was conducted with the aim of redesigning technology, industry, and enterprise systems so that humans who live on Earth can be more sustainable for a longer time. It presented a practical alternative for a long-term sustainable human society. It suggested alternatives for what philosophy and methodology should be developed for the whole of humanity and in each individual national society, for developing technologies, fostering industries, and operating corporate systems. First of all, the problems of the technology development system, industrial system, and enterprise system of human society were analyzed. The characteristics and problems were analyzed in terms of sustainability of human society. The necessary and sufficient conditions for an alternative system to solve the raised problems were derived. A system that satisfies these conditions was designed and presented. The alternative system was named as a servicism system as a system based on the service philosophy. The structure, operation model, and implementation plan of the new technology industry enterprise system were presented. In the future, follow-up studies are needed to be concreted at the level of individual countries and human society as a whole.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.2
• /
• pp.24-36
• /
• 2023

OSC is drawing attention to supplement limitations such as productivity problems and on-site safety and quality problems of existing on-site labor-oriented construction production methods. In order to activate the introduction and use of OSC in the domestic construction market, it is important to innovate the technology applied to each stage of OSC process (design and engineering, factory manufacturing, site assembly, and maintenance), but it is also necessary to develop a project management method suitable for OSC method. However, research related to OSC currently being conducted in Korea is mainly in terms of related technology development, and research on deriving project management measures for the success of OSC projects is insufficient. Therefore, it is time for research on deriving a project management plan based on the core success factors of the OSC project. Therefore, by conducting importance-performance analysis on 69 OSC critical success factors derived from the previous study, the study was conducted to derive key improvement factors for OSC introduction and utilization improvement and to provide implications for this. The results of this study are expected to have useful implications for the R&D planning and policy-making process for OSC activation in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.30-37
• /
• 2023

The PSCB girder bridge is a closed cross-section in which the top and bottom flanges and the web are integrated, and the structural characteristics are generally different from the bridges in which the girder and the floor plate are separated, so a maintenance plan that reflects the characteristics of the PSCB girder bridge is required. As a result of analyzing damage types by collecting detailed safety diagnosis reports of highway PSCB girder bridges, most of the deterioration and damage occurring during use is concentrated on the top flange. In particular, cracks in the bridge direction on the underside of the top flange occurred in about 70 % of the PSCB girder bridges to be analyzed, and these cracks were judged to be caused by indirect loads such as heat of hydration and drying shrinkage rather than structural cracks caused by external loads. In order to improve durability and reduce maintenance costs of PSCB girder bridges in use, it is necessary to control restraint drying shrinkage cracks from the design stage. Therefore, in this paper, the cracks caused by drying shrinkage under restraint, which is the main cause of cracks under the flanges of the top part of the PSCB girder bridge, were directly calculated using the Gilbert Model, and the influencing factors such as the amount of reinforcing bars, diameter and spacing of reinforcing bars were analyzed. As a result of the analysis, it was found that the crack width caused by restraint drying shrinkage exceeded the allowable crack width of 0.2 mm for reinforcing bars with a reinforcing bar ratio of 0.01 or less based on the H16 reinforcing bar and a reinforcing bar with a diameter greater than H19 based on the reinforcing bar ratio of 0.01. Finally, based on the results of the crack width review, a method for controlling the crack width of the top flange of the PSCB girder bridge was proposed.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.8
• /
• pp.189-199
• /
• 2017

The purpose of this study is to compare the grid usage that is common to Leonardo da Vinci and J.N.L. Durand in the process of designing the architectural plan. In the days when there was no proper measurement tool, auxiliary lines relied entirely on the architect's personal mindset and design convenience. Therefore, it is considered that studying the auxiliary lines drawn by the architects will be useful for studying the human perception system. Among auxiliary lines, the grid has been used by many architects. Leonardo da Vinci and J.N.L. Durand are famous. However, these two show a significant different grid usage. As auxiliary grid and space ares added the center of the Leonardo da Vinci grid continues to move, and the grid in his sketch is becoming a building space itself. So I call it 'conceptual grid'. In the case of J.N.L. Durand, the one center of the grid is always at the center of the drawing. That is, all the positions of the grid can be determined in phase around a common point, and all of the same specifications are assumed. The grid is a kind of filter. That's why his grid is a visual abstraction of the process of thinking. In this paper, I will call the grid of J.N.L. Durand as 'abstract grid'.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.12
• /
• pp.513-522
• /
• 2016

The importance of the national reseach and development project has been increased since the global financial crisis for overcoming the world economic recession and responding the threatens of the global competitiveness. As the budgets are increased and the size of the tasks is enormous, the government often requests high-level audits and data for the transparent management of research expenses. As a result, the researchers who have to concentrate on the original research work spend much time in administrative processing, government audit, and responding to the demand data than the time to concentrate on the research work. It is absolutely necessary to have a system that can integrally manage R & D projects from a company-wide point of view in order for researchers to work efficiently and concentrate on the original research. Korean government has increased the investment for the national R&D, and therefore the size of R&D projects has become more larger. Therefore, this study attempts to present a standardized management process and system establishment direction for the efficient management of research and development project and to study the success factor of system establishment for the successful execution of project and the project management plan by the case study.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.28-45
• /
• 2023

Although we have entered the era of digital transformation, there is currently no system that efficiently collects, manages, integrates, and services a large number of archaeological digital source materials produced as a result of cultural relics research, i.e., an intelligent integrated management and service platform for archaeological academic information. In this regard, the need to build a digital dictionary of Korean archaeology was confirmed by examining the problem of the Digital Encyclopedia of Korean Archaeology, which is currently available in PDF format on the web, the current status of the publication and use of the Dictionary of Korean Archaeology, and the cases of building digital platforms at home and abroad. Therefore, this paper aims to suggest a general direction for creating a digital encyclopedia of Korean archaeology based on the Dictionary of Korean Archaeology, which includes quality knowledge information, to reconsider the accessibility of archaeological data in conformity with data access limitations. The application of the series Dictionary of Korean Archaeology, published since 2001, and the necessity for digital transformation were examined, as well as the application of data from the archaeological data archiving platforms of Europe, the USA, Japan, and cases of establishing platforms corresponding to specialized encyclopedias from Korea. Based on these, a three-step implementation plan and detailed projects were suggested to create the Digital Encyclopedia of Korean Archaeology. Through this, we proposed the design of metadata for computerized records and the expansion to semantic (meaning-based) data that gives and shows the relationship information between the produced metadata as the implementation tasks to build the Digital Dictionary of Korean Archaeology. It is hoped that such research will help create an integrated intelligent management and service platform for archaeology, raise awareness, and provide a better understanding of Korean archaeology to the general public.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.37-46
• /
• 2023

As real estate values rise, interest in cadastral resurvey is increasing. Accordingly, a cadastral resurvey project is actively underway for drone operation through securing work efficiency and improving accuracy. The need for utilization and management of cadastral resurvey results (drone images) is being raised, and through this study, a 3D spatial information platform was developed to solve the existing drone image management and utilization limitations and to provide drone image-based 3D cadastral information. It is proposed to build and use. The study area was selected as a district that completed the latest cadastral resurvey project in which the study was organized in February 2023. Afterwards, a web-based 3D platform was applied to the study to solve the user's spatial limitations, and the platform was designed and implemented based on drone images, spatial information, and attribute information. Major functions such as visualization of cadastral resurvey results based on 3D information and comparison of performance between previous cadastral maps and final cadastral maps were implemented. Through the open platform established in this study, anyone can easily utilize the cadastral resurvey results, and it is expected to utilize and share systematic cadastral resurvey results based on 3-dimensional information that reflects the actual business district. In addition, a continuous management plan was proposed by integrating the distributed results into one platform. It is expected that the usability of the 3D platform will be further improved if a platform is established for the whole country in the future and a service linked to the cadastral resurvey administrative system is established.