• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.95-98
• /
• 1991

회전 기기의 이상으로 인하여 발생하는 진동은 축 회전속도의 고주파 성분 (super-harmonic)이나 또는 분수조파 성분(sub-harmonic)으로 나타나는 경 우가 대부분이기 때문에 회전기기의 진동을 주파수 영역에서 해석함에 있어 파워 스펙트럼의 주파수 축을 Hz로 나타내기보다는 축 회전속도의 order로 써 나타내는 것이 매우 유용하다. 스펙트럼을 order로써 나타내기 위해서는 샘플링 시간을 축 회전속도와 동기(synchronization)시켜야 하는데 이 방법으 로는 회전축에 엔코더(encorder)를 부착하여 엔코더에서 발생하는 펄스 신호 를 이용하여 샘플링하는 방법과 order tracking 필터를 이용하는 방법이 있 다. 그러나 전자의 방법은 원하는 회전축마다 엔코더를 부착하여야 하며 경 우에 따라서는 엔코더를 부착하기가 어려운 경우도 있으며, 회전기기의 운전 개시나 종료시처럼 회전속도가 급격히 변화하는 경우에는 낮은 주파수에서 중첩(aliasig)에 의한 오차가 수반될 수도 있다. 후자의 방법은 order tracking 필터 이외에도 여러 부수장비가 필요하며 기준 주파수(즉 회전속 도)가 급격히 변화하는 경우 PLL(phase locked loop)에서 tracking 오차가 발생된다. 최근에 발표된 논문에서 일정한 시간간격으로 샘플링한 데이터들 로부터 신호를 재합성하여 회전축의 속도와 동기가 되도록 재 샘플링함으로 서 스펙트럼의 주파수를 회전속도의 order로써 나타내는 방법을 제시하였다. 그러나 위 논문에서는 신호의 재합성에 필요한 재합성 필터(reconstruction filter)의 설계 방법에 대하여 구체적인 언급이 없이 다만 결과만을 논하였다. 따라서 본 논문에서는 재합성 필터의 설계 방법에 대하여 구체적인 방법을 제시하고 또한 동기화 샘플링의 장점 및 고려 사항에 대하여 고찰하였다. 고려한 능동 소음제어 에 대해 연구하였다. 경량화 추세에 따라 지반이나 케이싱이 경량이거나 유연하여 회전축과 동적으로 연성된 경우 회전축-베어링-지반으로 이루어진 2중구조의 회전축 계 동특성을 해석할 수 있는 프로그램을 개발하므로서 회전 기계류의 진동 전반에 걸친 문제점에 대한 그 원인과 현상을 명확히 분석하여 국내의 전기 계류의 보다 신뢰성있는 설계 및 제작자료를 확보하는데 기여할 수 있게 하 였다.존의 small molecular Gd-chelate에 비해 매우 큼을 알 수 있었다. MnPC는 간세포에 흡수된 후 담도계로 배출되는 간특이성 조영제임을 확인하였다. 장비 내에서 반복 시행한 평균값의 차이는 대체적으로 유의한 차이가 없었으나, 다른 장비에서 반복 시행한 장비간의 사이에는 유의한 차이가 있는 경우가 더 많았다. 따라서 , MRS 검사를 소뇌나 뇌교의 어떤 절환에 적용하기 전에 각 장비 마다 정상 기준치를 반드시 얻은 후에 이상여부를 판 정하는 것이 필수적이라고 생각된다.EX> 이상이 적절한 진단기준으로 생각되었다. $0.4{\;}\textrm{cm}^3$ 이상의 좌우 부피차를 보이는 모든 증례에서 육안적으로도 해마위축이 뚜렷이 나타났다. 결론 : MR영상을 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The re

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.515-524
• /
• 2010

In line with the government's policies for localization, furniture industry in the northern area in Gyeoggi-province at presence has been operated by several furniture industrial complexes in the region in small scale, but now it should be considered from overall view of furniture industry in order to develop more competitive industry. As a matter of this fact, Gyeonggi-province should be engaged in planning to make various industrial clusters of the furniture-related industry based on the northern area of province at structural as well as politic aspects, with the help of the analyzed status of the current furniture industry in region, in supporting them by the systemized policies and developing the overall program to foster furniture as an international-competitive industry. Therefore this study suggested 'furniture industry center' which will exclusively handle and maintain the network of each furniture company in the northern area of Gyeonggi-province and 'high-tech furniture industry complex' to keep pace with the globalization and to be competitive internationally and also 'common brand business' for the cooperation at technical phase. In order to realize and vitalize such suggestions, it is urgently necessary that the network consists of the furniture companies and the expert of the related department in local universities as the main body for furniture industry, of course Gyeonggi-province as well.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1340-1350
• /
• 2009

The design and implementation of planar Active Phased Array Antenna System are described in this paper. This Antenna system operates at X-band with its bandwidth 10 % and dual polarization is realized using dual slot feeding microstrip patch antenna and SPDT(Single Pole Double Through) switch. Array Structure is $16\times16$ triangular lattice structure and each array is composed of TR(Transmit & Receive) module with more than 40 dBm power. Each TR module includes digital attenuator and phase shifter so that antenna beam can be electronically steered over a scan angle$({\pm}60^{\circ})$. Measurement of antenna pattern is conducted using a near field chamber and the results coincide with the expected beam pattern. From these results, it can be convinced that this antenna can be used with control of beam steering and beam shaping.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.1010-1026
• /
• 2004

The goal of product line engineering is to support the systematic development of a set of similar software systems by understanding and controlling their common and distinguishing characteristics. The product line engineering is a process that develops reusable core assets and develops a set of software-intensive systems from a common set of core assets in a prescribed way. Currently, many software development technologies are accomplished in context of product line. However, much of the product line engineering research have focused on the reuse of work products relating to the software's architecture, detail design, and code. The product lines fulfill the promise of tailor-made systems built specifically for the needs of particular customers or customer groups. In particular, commonality and variability play central roles in the all product line development processes. These must be treated already during the requirement analysis phase. Requirements in product line engineering are basis of software development just like as traditional system development engineering, and basis of deciding other core assets' property - commonalities and variabilities. However, it is difficult to elicit, analyze and manage correct requirements. Therefore, it is necessary to develop systematic methods which can develop and manage requirement as core asset, which can be stable in anticipative change and can be well adapted to unpredictable change. In this paper, we suggest a method of managing requirements as core asset in product line. Through this method, the reuse of domain requirements can be enhanced. As a result, the cost and time of software development can be reduced and the productivity can be increased.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.1027-1042
• /
• 2004

A Software Component is a module that is reused among a lot of projects, systems, and companies rather than a single application. Components can be reused in various systems if they provide not only the common functionalities required in many applications but also the diverse aspects to be customized for being suitable for customers' demands. From the development phase, components should be designed and developed considering the variable aspects they have for convenient customization. Easily customized components can be frequently reused in lots of applications. In the literature, there are some modeling and customizing techniques. But they suggested only conceptual or basic methods based on Object-Oriented. And the practical instructions for reusing component were not provided sufficiently. Moreover, there are few techniques that consider the proper variability types components have. Thus, those techniques are not appropriate for applying to black box component completely developed and released. In this paper, we classify variabilities that components have in functional aspect into two categories. The one is logic variability, and the other is workflow variability. For each classified variability, we propose the three kind of modeling techniques, which are selection, plug in and externalization. Also detailed instructions for practical design and application are provided.

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.220-232
• /
• 2010

Companies have been difficult to capture the minds of consumers by staying in the sales phase in order to sell products. The marketing and brand management strategies of more understanding consumers and systematically managing for the perception of them are becoming important. Since launched, EXR has implemented a systematic brand management process from its early stage. Based on the idea of 'brand asset by customer' by Kevin Lane Keller that the total of consumer brand knowledge ultimately completes the company brand power, 'brand asset', to satisfy areas of 'functionality' and 'design', EXR pioneered its ultimate brand asset which is 'CAPORTS' and established its own identity called, 'PROGRESSIVE'. For the success of a brand management, there must be a clear vision supported by the determination of a specific brand identity. Also, it needs to be shared by members of the organization, and to maintain and manage it in the long run, an integrated management strategy is essential. On the basis of such identity, EXR was able to carry out the integrated management for its brand and the overall implementation of the marketing strategy. Therefore, In this study, we seek for a sustainable brand management strategy of fashion brand by looking into the process of the EXR's brand establishment.

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.423-434
• /
• 2014

This study examined the relative effects of positive and negative reinforcement on customer service behaviors. In addition, we examined whether the intervention would lead to response generalization on non-target behaviors. Five employees at three different convenient stores participated and ABC/ACB within-subject design was adopted. For the three participants, followed by the baseline(A), the positive reinforcement was first introduced(B) and the negative reinforcement(C) was introduced for the next phase. For the remaining two participants, the negative reinforcement(C) was first introduced after baseline(A) and the positive reinforcement (B) was introduced. Results showed a greater improvement in target behaviors under the positive reinforcement condition than that of the negative reinforcement condition. In addition, both reinforcement condition cause response generalization on non-targeted service behaviors, however, the comparable effects was found between two reinforcement conditions. Post-interview indicated that participants experienced positive emotions under positive reinforcement condition and negative emotions under negative reinforcement condition. These results suggest that the he techniques using positive reinforcement can be more effective and efficient to improve the work performance.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2003.10a
• /
• pp.66-72
• /
• 2003

Toxicogenomics is now emerging as one of the most important genomics application because the toxicity test based on gene expression profiles is expected more precise and efficient than current histopathological approach in pre-clinical phase. One of the challenging points in Toxicogenomics is the construction of intelligent database management system which can deal with very heterogeneous and complex data from many different experimental and information sources. Here we present a new Toxicogenomics database developed as a part of 'Toxicogenomics for Efficient Safety Test (TEST) project'. The TEST database is especially focused on the connectivity of heterogeneous data and intelligent query system which enables users to get inspiration from the complex data sets. The database deals with four kinds of information; compound information, histopathological information, gene expression information, and annotation information. Currently, TEST database has Toxicogenomics information fer 12 molecules with 4 efficacy classes; anti cancer, antibiotic, hypotension, and gastric ulcer. Users can easily access all kinds of detailed information about there compounds and simultaneously, users can also check the confidence of retrieved information by browsing the quality of experimental data and toxicity grade of gene generated from our toxicology annotation system. Intelligent query system is designed for multiple comparisons of experimental data because the comparison of experimental data according to histopathological toxicity, compounds, efficacy, and individual variation is crucial to find common genetic characteristics .Our presented system can be a good information source for the study of toxicology mechanism in the genome-wide level and also can be utilized fur the design of toxicity test chip.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.225-245
• /
• 1992

The button is a part of costume. But it has the symbolism of costume in itself and reflects the sociocultural phenomena. The purpose of this study is to clarify symbolism of button of eighteenth and nineteenth century which had been most popular. This study is based on the library research. Through this paper, I reached conclusions as follows. The symbolism of button is found in various ways. First, Aesthetics is found in material, color, design and type etc. of button. Especially Indian silver button of abstract type shows well distinctive aesthetics of Indians. Second, The material and the number of button vary with one's status and show off one's privilege. I England, there was the rule, in which the symbol of the King was a silver button with a figure of lion. The livery button represents his family to the nble and shows the meaning of obedience to the servant. Third, The button on uniform varies with ranks. This is prominent in a uniform of a soldier or a policeman. Fourth Material and craft of button show one's economic position. The button gives a Very good picture of what one's life was then. Precious button with gold, silver, and other jewels is an index to one's property. Fifth, The button of political event is used for election, which shows the face and the name of runner. Besides that, there were buttons designed for the flag or the slogan for political event. Sixth, The button of social event reflects a social phase of life in war or revolution, for example, it satirizes the burning of the Bastille in the French Revolution, or the taxpayer bearing the burden. Seventh, the buttons that symbolize a historic event are made to commemorante an epochal and critical occurrence or an important person's birth, death, visit to some place, etc., Eighth, there were well-known persons, for example, a president, a king, a queen, a singer, or an artist in the buton of personality. Nineth, The button of one's company shows one's community in figures or pictures, that is, this button is used as a symbol one's community. Tenth, The button varies with the development of science and technology. It gives a very good picture of what it was and what the technological level was. Eleventh, The buttons that symmbolize on occupation most impressively are uniform buttons. Symbolic marks related with a particular occupation are carved on the buttons of compary employees' uniforms. Twelfth, Various natural phenomena are designed to appear on buttons, Some express themselves simply as they are, and others appear as a symbolic form such as environmental relationship between men and nature, four seasons, a constellation and all other natural things occurring during a year. Finally, The button of rebus is a motto expressed by a combination with objects figures, letters, words, or phrases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1101-1107
• /
• 2014

A heavy ion accelerator is a device that accelerates heavy ions in the radio frequency (RF) range. The electric field that flows into the RF cavity continuously accelerates heavy ions in accordance with the phase of the input electromagnetic wave. For the purpose, it is necessary to design a coupler shape that can stably transfer the RF wave into the cavity. The RF coupler in a heavy ion accelerator has a large temperature difference between the input port and output port, which radiates the RF waves. It is necessary to consider the heat deflection on the RF coupler that occurs as a result of the rapid temperature gradient from an ultra-low temperature about 0 K to a room temperature about 300 K. The purpose of this study was to improve the system performance through an analysis of the intensity of the output electric field and temperature distribution considering various shapes of the RF coupler, along with an analysis of the durability considering the heat deflection and heat loss.