• 제목/요약/키워드: Design phase

검색결과 6,224건 처리시간 0.031초

Intervening Firing Method and Passive Filter Design for Harmonic Elimination and Reactive Power Compensation in Three-Phase Thyristor Phase-Controlled Converters Supplying a DC Motor

  • Pattanapongchai, Artite;Wongtongdee, Surached W.;Laohasongkram, Piphat
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.813-816
    • /
    • 2005
  • This paper presents a method for harmonic elimination and reactive power compensation using an intervening firing method and passive power filter with is suitable to compensate rapidly changing loads and reactive power. The proliferation of three-phase thyristor phase-controlled converter of DC motor drives into a power system has the potential to increase the harmonic levels in the power system. The design procedure of an intervening firing method and passive power filter capable of reducing the voltage and current harmonics produced by converter supplied from a source having internal large inductive impedance is offered. The analysis uses the or CAD PSpice to model three-phase thyristor phase-controlled converter of DC motor drives as well as the system.

  • PDF

광대역 5-bit 위상변위기의 설계 및 제작 (Design and Implementation of the Wideband 5-bit Phase Shifter)

  • 전병휘;정영준;이광일;임인성;오승엽
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 I
    • /
    • pp.613-616
    • /
    • 2003
  • This paper describes the design and implementation of wideband 360$^{\circ}$ phase shifter by using I/Q vector method. One of four quadrants was selected by a switching operation and the desired phase value was obtained by varying attenuation level of attenuator located in I/Q path. The minimum phase RMS error of 3.6$^{\circ}$ and the maximum phase RMS error of 25.2$^{\circ}$ were measured over 6~180Hz frequency range. Those characteristics are good enough for the requirement of ECM radar equipment. The phase values can be adjusted by control module.

  • PDF

MIC화 PIN다이오드 하이브리드형 이상기의 설계에 관한 연구 (A Study on the Design of Hybrid MIC Phase Shifter Using PIN Dioid)

  • 김태회;박의준;박정기
    • 한국통신학회논문지
    • /
    • 제12권4호
    • /
    • pp.325-334
    • /
    • 1987
  • PIN 다이오드를 利用한 反射形 移相器는 4端子網 임피던스 變換回路로 構成될 수 있는데 원하는 移相量을 얻기위한 設計方程式 誘導에 假想 임피던스法을 적용하였다. 실제로 2-bit($22.5^{\circ}$$45^{\circ}$)하이브리드 移相器를 設計 具現하여 中心周波數(10GHz)에서 $22.5^{\circ}$bit는 $0.5^{\circ}$, $45^{\circ}$bit는 $0^{\circ}$의 移相量 誤差의 것을 얻었으며 main beam 制御用 phased-array안테나를 위한 移相器設計에 이 方法을 사용할 수 있음을 立證하였다.

  • PDF

지진동의 위상 특성과 비선형 응답 (Nonlinear Response and Phase Angle Characteristics of Earthquake Ground Motions)

  • 우운택;박태원;정란
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.497-504
    • /
    • 2002
  • The characteristics of harmonic phase angles and phase angle differences contained in earthquake ground motions such as El Centre 1940 NS, Taft1 1952 NS, Hachinohe 1968 NS and Mexico 1985 are figured, which have been mostly overlooked in contrast with the importance placed on harmonic amplitudes. Recently, performance based design method is used for seismic design and seismic retrofitting, which needs nonlinear response analysis, there must be earthquake ground accelerations which contain the phase angle and the phase angle difference characteristics of the zone considered to be constructed building structures. To make clear the importance of phase angle differences, 4-earthquake ground motions are normalized by 200 gal and nonlinear response characteristics of normalized 4-earthquake ground motions are compared.

  • PDF

집적회로내의 발진기에서 발생하는 위상잡음에 대한 고찰 (A Study on the Phase-Noise Generated in Oscillators of Integrated Circuits)

  • 박세훈
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 추계종합학술대회
    • /
    • pp.903-905
    • /
    • 2005
  • 링발진기의 위상잡음을 줄이기 위한 이론적인 기초를 소개한다. 위상잡음과 링발진기의 설계 파라메타의 관계를 이해함으로써 위상잡음을 설계 단계에서 줄이는 효과를 볼 수 있다. 기존의 참고 문헌을 통해 얻어진 위상잡음과 설계 파라메타의 관계를 통해 위상잡음을 줄이는 방법을 제시한다.

  • PDF

극호비에 따른 단상 SRM의 토오크 특성 해석 (Characteristic Analysis of Single Phase SRM on Pole Ratio)

  • 이종한;이은웅;이충원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 B
    • /
    • pp.690-692
    • /
    • 2003
  • The single phase switched reluctance motor has been studied and developed actively in the various applications with several kinds and forms because of the developments of the design technique by using the computer and of the driving technique power electronic technology, which has the merits of a simple and robust structure, and first of all reducing the number of the switching devices in comparison with poly phase switched reluctance motor. And also, the studies are making progess to substitute the switched reluctance motor for single phase induction motor. In the previous studies, the single phase switched reluctance motor for the drive of blower is designed with the design theory of the conventional rotating electric machine and poly phase switched reluctance motor. In this paper, we intend to select the optimal pole arc and pole pitch ratio by the FEM analysis, because the pole arc and pole pitch are very important factor to determine the characteristics of switched reluctance motor.

  • PDF

A Design Optimization of Asymmetric Air-gap Structure for Small 3-phase Permanent Magnet SPM BLDC Motor

  • Kam, Seung-Han;Jung, Tae-Uk
    • Journal of Magnetics
    • /
    • 제20권1호
    • /
    • pp.91-96
    • /
    • 2015
  • As many researchers are relentlessly trying to improve the power generation schemes from the power grid, to meet the constantly increasing electricity demand. In this paper, the results of a finite element analysis are carried out to study on a design optimization of an asymmetric air-gap structure in 3-phase Permanent Magnet Brushless DC Motors. To achieve a high efficiency for a 3-phase PM BLDC motor, the asymmetric air-gap structure is proposed considering the rotation direction of a motor. Generally, a single-phase BLDC motor is applied asymmetric air-gap structure for starting. This is because the asymmetric air-gap structure causes reluctance variation so the motor can utilize reluctance torque toward a rotation direction. In this paper, the asymmetric air-gap is applied to 3-phase BLDC SPM motor so it utilizes reluctance torque with alignment torque. A proposed model is designed by 2-D FE analysis and the results are verified by experimental test.

단일 입출력 시스템에 대한 IMC-PID의 새로운 최적 동조법 (New Optimal Tuning Method of IMC-PID for SI/SO Systems)

  • 김창현;임동규
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 춘계종합학술대회 A
    • /
    • pp.213-217
    • /
    • 2008
  • 본 논문에서는 표준 IMC-PID 제어기에 시스템 식별상의 위상 조절 인자를 설계 변수로 추가함으로 새로운 IMC-PID 제어기 설계 방법을 제안한다. 제안된 제어기의 동조법으로 해석적으로 구해진 주파수 영역 특성을 통해 주파수 영역 성능을 보장하도록 하는 설계 변수의 구속 조건 하에서 시간영역의 적분 오차 지표를 가격함수로 최소화하는 최적 해를 얻는다. 이 제안된 동조법은 다양한 설계 사양을 동시에 고려하도록 하여 기존의 IMC-PID의 단일 설계 변수 동조가 갖는 비유연성 문제를 개선하였다. 사례 연구에서 기존의 동조법들과의 성능 비교를 통해 그 유용성을 검토했다.

  • PDF

제 1상 임상시험에서 Biased Coin Design과 멈춤규칙을 이용한 MTD 추정법 (Maximum tolerated dose estimation by Biased coin design and stopping rule in Phase I clinical trial)

  • 전소영;김동재
    • 응용통계연구
    • /
    • 제33권2호
    • /
    • pp.137-145
    • /
    • 2020
  • '투약용량 발견 시험(Dose Finding Study)'라고도 불리는 제 1상 임상시험은 동물 실험 혹은 시험관 실험을 통하여 개발된 신약물질을 사람에게 실시하는 첫 단계이다. 제1상 임상시험의 가장 주요한 목적은 환자에게 허용할 수 있고 최대의 효능을 가진 복용량을 결정하는 것이다. 본 논문에서는 이를 고려하여 최대허용용량(MTD)를 결정할 수 있는 적절한 추정방법을 제안하였다. 이 방법은 Biased coin design과 멈춤규칙을 이용하여 MTD를 추정한다. 제안하는 방법은 모의실험을 통해 기존의 방법들과 비교하였다.

단상하프브릿지 구조를 갖는 계통연계형 인버터의 필터인덕터 설계 (Filter Design for Utility Interactive Inverters using Single-Phase Half-Bridge Topology)

  • 김효성
    • 전력전자학회논문지
    • /
    • 제12권5호
    • /
    • pp.364-371
    • /
    • 2007
  • 본 논문은 단상하프브릿지 구조를 갖는 계통연계형 전압형 PWM 인버터를 위한 필터설계를 목적으로 한다. 단상하프브릿지 전압형 PWM 인버터의 교류출력단 전압과 계통전압의 관계를 분석하여 필터 인덕터에 순시적으로 인가되는 전압의 특징적인 관계를 정성적 및 정량적으로 파악하였다. 또한 교류출력단 전압의 분석을 기초로 하여 필터인덕터에 흐르는 스위칭리플전류의 크기를 정량적으로 구하였다. 이러한 분석을 기초로 하여 계통주입전류의 기본파성분에 대한 스위칭리플전류의 비율을 평가함수로 하는 필터인덕터의 설계법을 제시하였다. 제안된 설계방법을 시뮬레이션 및 실험을 통하여 검증한다.