• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.42-52
• /
• 2012

In this paper, a waveguide antenna is designed and fabricated for side and rear radar sensor of vehicles in UWB (Ultra Wide Band) high band (center frequency : 9.5 GHz, -10 dB bandwidth : 600 MHz (6.4 %)). For the radar antenna, a probe fed rectangular waveguide antenna having simple structure and wide bandwidth is used. An important performance factor in this antenna is the isolation between transmitting (TX) and receiving (RX) waveguide antennas because this radar system uses TX and RX antennas separately. Thus the isolation between two antennas was simulated for E-plane and H-plane array. As a result, it was verified that the isolation of the H-plane array of the antennas is better than E-plane array, due to the TE10 mode. Therefore, H-plane arrayed waveguide antennas were mounted on a T-shaped radar module and performance of antennas was investigated. The -10 dB bandwidth of the TX and RX antenna mounted on T-shaped radar module was measured as 1000 MHz (10.52 %) and 1090 MHz (11.47 %) respectively and the isolation is less than -50 dB in the operation band. The peak gain is 7.65 dBi for the TX antenna and 7.26 dBi for the RX antenna and the beamwidth of H-plane of TX and RX antenna was measured as $64^{\circ}$ and $65^{\circ}$ respectively. Consequently, we verified that the proposed waveguide antenna is appropriate for a vehicle radar applications.

• Science of Emotion and Sensibility
• /
• v.23 no.1
• /
• pp.41-56
• /
• 2020

This study suggests multisensory interaction techniques to help visually impaired people appreciate and understand artworks through non-visual senses such as tactile, auditory, and olfactory senses. A user study was conducted on the basis of a qualitative interview about the experience of appreciating artwork through the multisensory interaction system to visually impaired people so as to verify the development of the interaction techniques. The user test shows that the multisensory interactions in artwork generally not only help them appreciate and understand it but also give them satisfaction through artwork appreciation. However, it also indicates that some multisensory interactions caused the visually impaired people confusion and could not be perceived during the appreciation. On the basis of these outcomes, implications in this study are as follows. This study has contributed to providing specific development guidelines and indicators of non-visual multisensory interactions as a technical alternative to improve accessibility to cultural and artistic activities for the visually impaired. Furthermore, this study is expected to contribute to building a technical background, which can provide comprehensive sensory experiences with not only blind people but also non-blind people such as children and the elderly through universal interaction techniques beyond existing visual-oriented fragmentary experience.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.27-38
• /
• 2007

IPv6 has appeared for solving the address exhaustion of IPv4 and for guaranteeing the problems of security and QoS. It occurs the unexpected new attacks of IPv6 as well as the existing attacks of IPv4 because of the increasing address space to 128bits and the address hierarchies for efficient network management and additions of the new messages between nodes and routers like neighbor discovery and auto address configuration for the various comfortable services. For the successful transition from IPv4 to IPv6, we should get the secure compatibility between IPv4 hosts or routers working based on secure and systematic policy and IPv6. Network manager should design security technologies for efficient management in IPv4/IPv6 co-existence network and IPv6 network and security management framework designation. In this paper, we inspected the characteristics of IPv4 and IPv6, study on security requirement for efficient security management of various attacks, protocol, service in IPv4/IPv6 co-existence and IPv6 network, and finally suggest integrated solution about security vulnerability of IPv6 network in considering of analysis of IPv6 system, host and application, IPv6 characteristics, modified CGA(MCGA).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.474-482
• /
• 2012

Mobile Gateway(MG) is a wireless LAN device to provide internet services to a passenger on vehicles like a bus. For using internet services, MG connects the Road Side Unit AP(RSU AP) based on WLAN .To provide a stable communication service on the moving vehicle, handoff changing MG's RSU must be handled fast and stably. However, it has a physical limits to remove a disconnection time of handoff process by reason of its technological features. In this paper, we suggest a MIMG(Multi-Interface Mobile Gateway) executing seamless handoff by using multiple wireless LAN interfaces for connecting RSU. In the detailed way to do stable handoff, we suggest the "Link Sharing Technique" to disconnection time of packet transmission for RSU to MIMG and the "Path Sharing Technique" to remove disconnection time of packet transmission for MIMG to RSU. we implemented the MIMG which performs the suggested handoff technique. We confirmed the superiority of our system by remove of the disconnection time(0 ms), and improved over 50 % of the communication bandwidth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.629-635
• /
• 2019

In this study, we analyzed the effect of FAN and oil cooler application on APU. MIL-STD-810 was applied to the atmospheric environment and radiation dose in order to perform thermal flow analysis. The heat flow was analyzed for the case in which the inlet / outlet fan was applied (Case 1), the case in which the inlet fan and the oil cooler were applied (Case 2), and the case in which the inlet / outlet fan and the oil cooler were applied (Case 3). As a result, it was confirmed that the cylinder head temperature of Case 3 was 21.4 times lower than that of Case 1 and 8.0 times lower than that of Case 2. Experiments were conducted under the same ambient conditions in order to examine the validity of the results. The numerical values and experimental results showed a difference of less than 7%. Through this, we were able to confirm that the APU heat flow optimization model satisfies the design conditions. The results of this study are expected to be used as basic data for optimizing heat flow of APU.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.271-310
• /
• 2017

This paper examines the composition and the content of media art which is an art education subject in a national curriculum of Australia; and discusses implications for Korean education curriculums. Media covered by Media Art subject in Australia are the multi types of general media including TV, movie, video, newspaper, radio, video game, the internet, and mobile media; and their contents. The purpose of ACARA's media art education curriculum is to improve creative use, knowledge, understanding, and technology of communication techniques for multiple purposes and the audiences. Through the Media Art subject, both the students and the community are able to participate in the actual communications with the rich culture surrounding them and to develop the knowledge and understanding of the 5 core concepts of language, technology, system, audience and re-creation while testing the culture. The implication of this study is as the following. ACARA's media art education curriculum has been developed as an independent educational program and has a special significance within Australian education curriculums. Although ACARA's media art education curriculum is formed as an independent subject, it is suggested within the curriculum to instruct in close connection with other subjects upon execution. Its organization and elaborateness in curriculum composition are very effective in terms of the teacher's teaching-learning design and as well as the evaluation. This seems to show a good model of leading media literacy curriculum. ACARA's media art education curriculum can be a great reference in introducing media literacy to Korean national education curriculums.

• Journal of Engineering Education Research
• /
• v.14 no.4
• /
• pp.69-77
• /
• 2011

In an accredited engineering program, there are two important means for achieving program outcomes. Students participating in a program are expected to achieve program outcomes through the program curriculum, because during the course of the program, they spend most of their time following the curriculum. However, it is very difficult to achieve the program outcomes only through the curriculum. Therefore, it is necessary to provide and manage non-curriculum courses in a program to make students achieve those program outcomes that the curriculum itself cannot provide exclusively. In this study, we conducted a case study on non-curriculum management systems as a means for supplementing a curriculum in order to enhance achievement of program outcomes, specifically, so-called, soft skills. We studied about 40 accredited engineering programs in Korea and proposed 30 non-curriculum courses with their evaluation units as well as the weighing criterior given to each non-curriculum course.

• Journal of KIISE:Databases
• /
• v.31 no.2
• /
• pp.108-121
• /
• 2004

In this paper, we propose an enhanced snapshot technique that solves performance degradation when snapshot is initiated for the storage cluster system. However, traditional snapshot technique has some limits adapted to large amount storage shared by multi-hosts in the following aspects. As volume size grows, (1) it deteriorates crucially the performance of write operations due to additional disk access to verify COW is performed. (2) Also it increases excessively the blocking time of write operation performed during the snapshot creation time. (3)Finally, it deteriorates the performance of write operations due to additional disk I/O for mapping block caused by the verification of COW. In this paper, we propose an efficient snapshot technique for large amount storage shared by multi-hosts in SAN Environments. We eliminate the blocking time of write operation caused by freezing while a snapshot creation is performing. Also to improve the performance of write operation when snapshot is taken, we introduce First Allocation Bit(FAB) and Snapshot Status Bit(SSB). It improves performance of write operation by reducing an additional disk access to volume disk for getting snapshot mapping block. We design and implement an efficient snapshot technique, while the snapshot deletion time, improve performance by deallocation of COW data block using SSB of original mapping entry without snapshot mapping entry obtained mapping block read from the shared disk.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.1-11
• /
• 2009

Super-hydrophobic surface, with a water contact angle greater than $150^{\circ}$, has a self cleaning effect termed 'lotus effect'. We introduced super-hydrophobicity onto aramid/rayon mixture fabric with dual-scale structure by assembling silica nano-sol. Mixture fabric was treated with silica nano-sol, fluoric polymer using various parameters such as particle size, concentration. Silica nano-sol size were measured using particle size analyzer. Morphological changes by particle size were observed using field emission scanning electron microscopy(FE-SEM), contact angle measurement equipment. The contact angle of water was about $134.0^{\circ}$, $137.0^{\circ}$, $143.0^{\circ}$, $139.5^{\circ}$ and $139.0^{\circ}$ for mixture fabric coated with 100.2nm, 313.7nm, 558.2nm, 628.5nm and 965.4nm silica nano-sol, compared with about $120.0^{\circ}$ for mixture fabric coated with fluoric polymer. When we mixed particle sizes of 100.2nm and 558.2nm by 7:3 volume ratio, the contact angle of water was about $146.2^{\circ}$. And we mixed particle sizes of 313.7nm and 558.2nm by 7:3 volume ratio, the contact angle of water was about $141.8^{\circ}$. Also we mixed particle sizes of 558.2nm and 965.4nm by 7:3 volume ratio, the best super-hydrophobicity was obtained. In this paper, we fabricated the water-repellent surfaces with various surface structures by using four types of silica nano-sol, and we found that the dual-scale structure was very important for the super-hydrophobicity.