• ETRI Journal
• /
• v.28 no.4
• /
• pp.506-508
• /
• 2006

A frequency selective surface (FSS), whose unit cell consists of a ternary tree loop loaded with a modified tripole, is proposed to block multiple frequency bands. Target frequency bands correspond to Korean personal communication services, cellular mobile communication, and 2.4 GHz industrial, scientific, and medical bands. Through the adjustment of inter-element and inter-unit cell gaps, and adjustment of the length of elements, we present an FSS design method that makes the precise tuning of multiple resonance frequencies possible. Additionally, to verify the validity of our approach, simulation results obtained from a commercial software tool and experimental data are also presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.197-200
• /
• 2001

Recently, Switching time is the principal factor in a design of frerquency synthesizer for Spread-Spectrum Communications. fast switching frequency synthesizer is important to improve the channel efficiency in a Frequency Hopping Spread Spectrum (FH-SS) tranceiver. In this paper, we design the frequency synthesizer with fast switching time as fast as 1${\mu}\textrm{s}$. In frequency synthesizer design, we use the interpolated PLL method inserted memory Look-up table of DDS to reduce switching time, and have result of improved channel efficiency about 20% by applying to FH-SS Transceiver.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.814-819
• /
• 2016

The Stockbridge damper is used to control the aeolian vibration of a overhead transmission line due to the natural wind under a low velocity, between 1 m/s to 7 m/s. The damper model can be simply derived with several design parameters and the location of eigenvalues of design parameters are important to determine the efficiency of energy dissipation by excitation itself with two counterweights. First, the importance of resonance frequencies of Stockbridge damper was reviewed through the analysis of frequency response function of damper system. Then, the best selection of design parameters was investigated with the introduction of objected function that minimize the distance between the calculated eigenvalues and target frequency points. The best choice of design parameters was reviewed using the simulated results from the objective function and the effectiveness of selected design case was discussed at the point view of practical implementation.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.205-208
• /
• 2000

In this paper, we design Tracking Filter that is principal component of Frequency Hopping System. This filter can acquire hopping pattern in short time and track it at high speed. This is high Q, narrowband, RF filter whose center frequency is controlled digitally between 30MHz ∼ 88MHz.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.3
• /
• pp.69-78
• /
• 1986

This studies were established to find out the characteristics of frequency distributiom for the number of occurrence and magnitude, probable flood flows according to the return periods, design floods, and design frequency factors for the studying basins in relation to the risk levels which can be correlated with design return period and the life of structure in the non-annual exceedance series. Eight watersheds along Han, Geum, Nak Dong and Seom Jin river basin were selected as studying basins. The results were analyzed and summarized as follows. 1. Poisson distribution and Exponential distribution were tested as a good fitted distributions for the number of occurrence and magnitude for exceedance event, respectively,at selected watersheds along Han, Geum, Nak Dong and Seom Jin river basin. 2.Formulas for the probable flood flows and probable flood flows according to the return periods were derivated for the exponential distribution at the selected watersheds along Han, Geum, Nak Dong, and Seom Jin river basin. 3.Analysis for the risk of failure was connected return period with design life of structure in the non-annual exceedance series. 4.Empirical formulas for the design frequency factors were derivated from under the condition of the return periods identify with the life of structure in relation to the different risk levels in the non-annual exceedance series. 5.Design freguency factors were appeared to be increased in proportion to the return periods while those are in inverse proportion to the levels of the risk of failure. Numerical values for the design frequency factors for the non-annual exceedance series ware appeared generally higher than those of annual maximum series already published by the first report. 6. Design floods according to the different risk levels could be derivated by using of formulas of the design frequency factors for all studying watersheds in the nor-annual exceedance series.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.634-637
• /
• 2005

A subjective index of sound quality when it hit him is required since human listening is very sensitive and complex. Sound quality evaluation it leads consequently rightly in each situation and it composes a sound quality factor. But one of the levels in interest frequency range is substitute we cannot see the tendency of frequency substitute at whole that is executes a clear voice evaluation. Design of experiment is used and dividing 12 equally in frequency domain, the sound quality using sharpness and annoyance is performed by modifying each of frequency domains. Design of experiment method reduces much number experiment very effectively and each main effect of domain solution analysis, such as a case of sharpness and annoyance, the change of domain (increase and decrease of sound pressure level, or change nil) can grasp a type of effect should have influenced to a sound quality, and it will be able to select the objective frequency domain which hits to the sound quality. Through these obtained results the physical changes of level at arbitrary frequency domain sensitivity can be adapted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1033-1040
• /
• 2012

Recently, several researches are focused on the frequency sharing and the liberalization of frequency use for utilizing the limited frequency resources efficiently. In military, as Network Centric Warfare(NCW), which requires significant mutual operability of battle elements and real-time operation speed, has come to the fore front as an important aspect of modern warfare, the methods to manage limited frequency resources in wireless communications environment efficiently has been studied and utilized. In this paper, we propose a Spectrum COP(Common Operation Picture) design suitable for the battlefields of air force. To construct the Spectrum COP of Air Force, we analyze the requirements and design the frequency management system by using EA(Enterprise Architecture) Framework. The simulation results of the proposed design proved the effectiveness by using EADSIM(Extended Air Defense Simulation) of Air Force.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.106-111
• /
• 2006

The steel outfitting structures installed in engine room are vibrated by an excitation of the engine and the propeller. Vibration problems such as cracks and fitting breakages are mainly induced at the near range of the resonance. The excitation frequency estimation is possible by engines and propeller specifications, but the natural frequency of a steel outfitting structure is not easily estimated due to the complication and variety of the designed shape. This paper represents natural frequency data of simple steel outfitting structures. As a vibration analysis tool, MSC/NASTRAN was used to calculate natural frequencies. Natural frequencies were compared in case of the shape and boundary condition changes of simple models, and anti-vibration models of the steel outfitting structures were presented on the basis of results.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.59-63
• /
• 2005

Since human listening is very sensitive when the sound hit him, the subjective index of sound quality is required. Therefore, at each situation of sound evaluation its composed with the sound quality factor. But, when substituting the level of one frequency band we could not see the tendency of substitution at whole frequency band during the sound quality evaluation. In this study a design of experiment is used. The frequency domain is divided into an equally 12 parts and each level of domain whether is given increase or decrease due to the change of frequency band based on 'sharp' and 'annoy' of the sound quality is analyzed. By using the design of experiment the number of test is reduce very effectively by the number of experiment and each band the main effect will be as a solution. The case of sound quality for 'sharp' and 'annoy' at each band, the change of band (increase or decrease of sound pressure or keep maintain) which will be the most effects on the characteristics of sound quality can be identify and this will be able to us to select the objective frequency band. Through these obtained results the physical changes of level at arbitrary frequency domain sensitivity can be adapted.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.970-974
• /
• 2007

A mixer is a key component in the wireless communication systems. In this paper, we design a mixer which is used in a frequency modulated continuous wave(FMCW) radar system. The frequency sweep range of the radar is from 10 GHz to 11 GHz. The transmitted and received signals of the FMCW radar are applied to LO and RF ports of the mixer, respectively, but the frequency difference between the two signals, which is called "a beat frequency" is under a few KHz and depending on the distance to target. Thus the isolation between the LO and RF ports is very important factor to design this mixer. In this paper we propose a single balanced resistive mixer using GaAs MESFET for this application. We first design a single-ended type resistive mixer using a simulation tool, then design a balanced type to increase the LO-to-RF isolation of the mixer. We fabricated the mixer on the substrate of dielectric constant 10 and thickness 0.635 mm. The measured results show that the isolation and conversion loss of the mixer over the frequency band is 20dB and 10.5dB, respectively. The LO input power for operating the proposed mixer is +3dBm, which is lower than a general conventional mixer's LO power. The 1 dB compression point is 6dBm.