• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.38-49
• /
• 2019

While the overall industrial accident rate has been decreased, but those of the construction industry has not been. For safety management during the planning/design phase, which accounts for 45% of the cause of accident at the construction site, Design For Safety (DFS) was established to minimize a hazard and risk in 2016. Currently, DFS system has difficulty settling down in Korea due to the several reasons. So, this paper aims to propose to the Key Success Factor (KSF) and related action plan to improve DFS system. This study was conducted by following 2 steps: i) identification of problems on current DFS, and ii) proposal of KSF and following action plan for DFS. The DFS in Korea was compared with UK, Singapore, Australia, and US on 7 criteria (application target, execution period, change of design, collaboration among participants, expert participants, alternative review and decision support system). DFS was compared with other countries's system based on the identical criteria and the corresponding improvement measures were also proposed. The results of this study can be utilized to improve DFS system in various aspects.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1029-1036
• /
• 2024

Drawing on the deep experience and understanding of the principles of nuclear safety, as well as many years of nuclear power plant design and operation, the EDF led NUWARD SMR Project is developing a design for a Small Modular Reactor (SMR) of 340 MWe composed of two 170 MWe independent units, that will supplement the offering of high-output nuclear reactors, especially in response to specific needs such as replacement of fossil-fuelled power plants. NUWARD SMR is a mix of proven and innovative design features that will make it more commercially competitive, while integrating safety features that comply with the highest international standards. Following the principles of redundancy and diversity and rigorous application of Defence in Depth (DID), with an international view on nuclear safety licensing, the Project also incorporates new safety approaches into its design development. The NUWARD SMR Project has been in development for a number of years, it entered conceptual design formally in mid-2019 and entered Basic Design in 2023. The objective of the concept design phase was to confirm the project technological choices and to define the first design configuration of the NUWARD SMR product, to document it, in order to launch pre-licensing with the French Safety Authority (ASN) and to define its estimated cost and its subsequent development and construction schedules. As a delivery milestone the Safety Options file (called the Dossier d'Options de Sûreté (DOS)) has been submitted to ASN in July 2023 for their opinion. An integral part of the NUWARD SMR Project, is not only to deliver a design suitable for France and to satisfy French regulation, but to develop a product suitable and indeed desirable, for the international market, with a first focus in Europe. In order to achieve its objectives and realise its market potential, the NUWARD SMR Project needs to define and realise its safety approach within an international environment and that is the key subject of this paper. The following paper: • Summarises the foundation principles and technological background which underpin the design; • Contextualises the key design features with regard to the international safety regulatory framework with particular emphasis on innovative passive safety aspects; • Illustrates the Project activities in preparation for first licensing in France, and also a wider international view via the ASN led Joint Early Review of the NUWARD SMR design, including Finnish and Czech Republic regulators, recently joined by the Swedish, Polish and Dutch regulators; • Articulates the collaborative approach to design development from involvement with the Project partners (the Commissariat à l'énergie atomique et aux énergies alternatives (CEA), Naval Group, TechnicAtome, Framatome and Tractebel) to the establishment of the International NUWARD Advisory Board (INAB), to gain greater international insight and advice; • Concludes with the focus on next steps into detailed design development, standardisation of the design and its simplification to enhance its commercial competitiveness in a context of further harmonisation of the nuclear safety and licensing requirements and aspirations.

• Nuclear Engineering and Technology
• /
• v.28 no.5
• /
• pp.440-451
• /
• 1996

With emphasis on safety, this study addresses for better design condition for the cooling system in a wet-type interim spent fuel storage facility, using a probabilistic safety assessment method. To incorporate the design renovation into the design phase, a simple approach is proposed. By taking the cooling system of a reference design, a fault tree analysis was performed to identify the weak point of the considered system, and then basic factors for design renovation were defined. A total of 21 design alternatives were selected through the combination of the basic factors. Finally, the optimum design alternative for the cooling system is derived by means of the cost and effect analysis based on the estimated cost, system reliability and assumed probabilistic safety criteria. With the assumption that the failure frequency of at-reactor spent fuel cooling system compiles with probabilistic safety criteria for the interim spent fuel cooling system, it was shown that the optimum alternative should have l00% cooling loop redundancy with one pump per cooling loop and a cleanup system installed separately from the main loop. Furthermore, it also should be classified into safety system. The result of this study can be used as a useful basis to identify factors of safety concern and to establish design requirements in the future. The method also can be applied for other nuclear facilities.

• Structural Engineering and Mechanics
• /
• v.59 no.5
• /
• pp.821-840
• /
• 2016

A simple design process is proposed for supplemental viscous dampers based on structural safety redundancy. In this process, the safety redundancy of the primary structure without a damper is assessed by the capacity and response spectra. The required damping ratio that should be provided by the supplemental dampers is estimated by taking the structural safety redundancy as a design target. The arrangement of dampers is determined according to the drift distribution obtained by performing pushover analysis. A benchmark model is used to illustrate and verify the validity of this design process. The results show that the structural safety redundancy of the structure provided by the viscous dampers increases to approximately twice that of the structure without a damper and is close to the design target. Compared with the existing design methods, the proposed process can estimate the elastic-plastic response of a structure more easily by using static calculation, and determine the required damping ratio more directly without iterative calculation or graphical process. It can be concluded that the proposed process is simple and effective.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.23-31
• /
• 2008

Recently, there is a rise of accident by some defective products, especially it reported that a serious fact is a defect of design causing some problem since execute a product liability(PL), people who use products have been able to bo remunerated for a damage to those defects, so responsibilities of companies are rising more and more. Therefore, companies that are obligated to manufacture a safety product, and should make preparation for PL. For solving the problem, even though manufacturers tried to make a safety product ay mixed ways, it is seldom that its safety is considered from planning a design. This thesis has suggested a way aimed at improving a safety of products through considering a stage of a plan, by searching and analyzing the design-process in to each steps.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.297-304
• /
• 2020

Design for Safety(DfS) at the design stage is introduced and executed in order to fundamentally reduce the occurrence of construction safety accidents in Korea. Therefore, in this study, the construction method selected by Design for Safety can reduce safety accidents, but the effects on construction duration and costs were examined to confirm the effectiveness of various aspects. The construction method of the structural frame for the exterior wall cladding of the building, which have the factors for the fall accident, was selected for construction safety and compared and analyzed in terms of construction duration and costs. As a result, it was found to be effective not only in terms of safety, but also in terms of construction duration and costs. Therefore, it is considered that the construction method selected by the Design for Safety at the design stage will have a positive effect on the entire construction project.

• Journal of Ship and Ocean Technology
• /
• v.4 no.4
• /
• pp.1-18
• /
• 2000

The paper describes a formalisation of a Design for Safety methodology in an integrated envi-ronment, outlines early developments of a software tool, and presents the results of an appli-cation of the methodology to a case study. The approach adopted attempts link safety per-formance prediction through the utilisation of appropriate technical tools, safety assessment deriving from risk-based methodologies and disparate design activities and issues. Black-board systems have been utilised as the platform in the development of the integrated design environment, allowing safety assessment to become an integral part of the design process. Finally, the case study addresses the application of the developed methodology to three dif-ferent arrangements of a conventional passenger Ro-Ro vessel, with the aim to demonstrate the validity of the process and methodology adopted. The findings are presented and dis-cussed, and recommendations given for the way forward.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.1-10
• /
• 2012

Recently, we have witnessed the definitely negative impacts of large-scale accidents happened in such areas as atomic power plants and high-speed train systems, which result in increased fear for the potential danger. The problems appear to arise due to the deficiency in the design of large-scale complex systems. One of the causes can be attributed to the design process that does not fully reflect the safety requirements in the early stage of the system development because of the substantially increased complexity. In this paper, to enhance the systems safety an integrated process is studied, which considers simultaneously both the system design process and system safety process from the beginning of the system development. In the conceptual system design phase an integrated process model is constructed by analyzing the activities of both the system design and safety processes. As a case study example, an inner city train system is described with the application of the developed process. The computer simulation of the example case is followed by the result discussed. The results obtained in the paper are expected to be the basis for the future study where a detailed process and its associated activities can be developed.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.381-389
• /
• 1999

One of the objectives of any task design is to provide a safe and helpful workplace for the employees. The safety and health module may include means for confronting the design with safety and health regulations and standards as well as tools for obstacles and collisions detection (such as error models and simulators). Virtual Reality is a leading edge technology which has only very recently become available on platforms and at prices accessible to the majority of simulation engineers. The design of an automated manufacturing system is a complicated, multidisciplinary task that requires involvement of several specialists. In this paper, a design procedure that facilitates the safety and ergonomic considerations of an automated manufacturing system are described. The procedure consists of the following major steps: Data collection and analysis of the data, creation of a three-dimensional simulation model of the work environment, simulation for safety analysis and risk assessment, development of safety solutions, selection of the preferred solutions, implementation of the selected solutions, reporting, and training When improving the safety of an existing system the three-dimensional simulation model helps the designer to perceive the work from operators point of view objectively and safely without the exposure to hazards of the actual system.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.3
• /
• pp.1-9
• /
• 2021

Crane is an important equipment for the transport of heavy goods in industrial sites, but it is also known as one of the most fatal machines. In order to reduce crane accidents, it is necessary to minimize human errors during crane operations. To achieve this, ergonomic design principles are recommended to be reflected from the crane design stage. The study analyzed the safety certification standards for crane that should be fulfilled at the crane design and manufacturing stage. This study selected five representative ergonomic design principles (feedback, compatibility, consistency, full-proof, and fail-safe) by surveying heuristic evaluation principles that are widely used for usability evaluation in early design stage. Next, the principles were applied to the safety certification standards to identify insufficient clauses. This study identified 12 insufficient clauses out of 119 in the current safety certification standards for crane and discussed their improvement directions to comply the ergonomic principles. The analysis results of this study can help of improving the safety certification standards and the method used in this study can also be applied to identify insufficient clauses in the safety certification standards for other industrial machines such as press machine and lift.