• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.88-93
• /
• 2000

Recently the gear design focuses on the optimal design to extract the design factors from the vehicle transmission that is required to equip the powerful, speedy and silent characteristics. In this study, we had determined modules($m_n$) and face widths (b) to sustain strengths of contact and bending. The pressure angle ($\alpha$) and the helix angle ($\beta$) also had been obtained from the constraint of a contact ratio ($\varepsilon) on helical gears. Through the optimal design algorithm suggested in this study, the design factors were calculated on vehicle transmission gears and those determined factors were able to firm a suitability of the design.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.756-763
• /
• 2008

The aim of this work was to obtain uniform and well-dispersed spherical silver nanoparticles using statistical design-of-experiment methods. We performed the experiments using 2 k fractional factorial designs with respect to key factors of a general chemical reduction method. The nanoparticles prepared were characterized by SEM, TEM and UV-visible absorbance for particle size, distribution, aggregation and anisotropy. The data obtained were analyzed and optimized using a statistical software, Minitab. The design-of-experiment methods using quantified data enabled us to determine key factors and appreciate interactions between factors. The measured properties of nanoparticles were dominated not only by individual one or two main factors but also by interactions between factors. The appropriate combination of the factors produced small, narrow-distributed and non-aggregated silver nanoparticles of about 30 nm with approximately 10% standard deviation.

• Korean Institute of Interior Design Journal
• /
• v.14 no.4 s.51
• /
• pp.54-61
• /
• 2005

The purpose of this study is to examine the physical factors of work environment and to establish the evaluation factors for office design for wheelchair users. This study is based on the existing research for office environmental factors; and then clarifies the physical factors that are suitable for circumstances of wheelchair users. These factors are composed three physical factors which are space, furniture arrangement, and ambient condition and then each of these factors has detailed several elements. Futhermore, comparing physical factors between a non-wheelchair user and a wheelchair user with work environment is analyzed on the assumption using the system furniture on the market. This study is expected to be used as basic information to provide the way of improving office space plan for wheelchair user in workplace. This resource can serve as a checklist when renovating, re-designing or building a new office space for wheelchair users. The evaluation of office environmental factors for wheelchair users who work in public and/or private companies is needed for the next research.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.123-129
• /
• 2003

Drift design using resizing techniques can be a very practical method in drift design of high-rise buildings since it cannot require sensitivity analysis and structural re-analysis. Resizing techniques has used the cross sectional areas as design variable and supposed that displacement participation factors are inversely proportional to structural weights. Efficiency of resizing techniques based on displacement participation factors may depend on proper selection of sectional properties as design variables. In this study, two different drift design methods with the different sectional properties as design variables are presented and applied to a 20-story structure.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.372-379
• /
• 2005

The earthquake resistant design concept allows the nonlinear behavior of structures under the design earthquake. Therefore the response spectrum method provided in most codes introduces the response modification factors to consider the nonlinear behavior in the design process. For bridges, the response modification factors are given according to the ductility as well as the redundancy of piers. In this study, among influence factors on the nonlinear seismic behavior, the randomness of artificial accelerograms simulated with different durations, the pier ductility represented by the inelastic behavior characteristic curve and the regularity represented by pier heights are selected. The influence of such factor on the seismic behavior is investigated by comparing response modification factors calculated with the nonlinear time step analysis.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.229-240
• /
• 2006

It is very important issue in information design to improve information efficiency by adapting interesting factors in changing circumstance of information communication. The concept of infotainment is utilized in designing information contents in a way of combining entertainment factors with information itself based on various media and representation technologies. The information arousing user's attention, which includes interesting factors, is persuasive message comppared to the informative message conveying only information itself. The reason why infotainment is persuasive is because it makes the user absorb deeply in the information during the process of understanding by sensorial stimuli, cognitive interest, and situational interest. The sensorial stimuli originates from the expression elements of information design. The cognitive interest from the user's intellectual activities has a try to overcome mental block when user confronts with the redundant expression in the manner of unexpectedness and inharmony. The situational interest originates from user's optimum experience by the flow of satisfaction. Therefore, the attribute of infotainment is defined with the stimuli, the redundancy, and user's satisfaction. Its design elements consist of physical factors, organizational factors, and psychological factors. The physical factors through sensorial stimuli are utilized by visual manipulation such as visual analogy or visual pun, multimedia, and moving expression. The organizational factors through redundant expression bring user's imagination by adapting storytelling, event, and interaction in the process of understanding information. The psychological factors through expression of entertainment interests such as humor, play, and game give users psychological satisfaction with the flow. In conclusion the concept of infotainment can be adapted when the design factors should be integrated with its attributes, or the conveying information should go well with its purpose and characteristics.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.545-552
• /
• 2015

The heat generation in PEMFC is proportional to the electrical power output. Therefore, when the fuel cell produced the maximum output, the maximum heat was generated. In order to maintain the performance of the fuel cell, thermal management is as important as pressure and humidity conditions of the reactive gas. In this study, considering the thermal management for the maximum output operation, the optimal cooling channel design specifications of bipolar plate are found for the highest cooling performance. In the current bipolar plate research, many studies focused on analyzing various factors individually but there is no more study on the interaction between design factors. In this study, the heat transfer was simulated by COMSOL Multiphysics with the main design factors which are designated shape, width and rib length. One of the experimental design methods, general full factorial design method, was used to analyze the main factor and interaction on average temperature and maximum temperature for the design specification of fuel cell bipolar plate. When analysis result shows that all of these three factors are highly important, it can confirm that the interaction occurs between the factors.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.3
• /
• pp.69-78
• /
• 1986

This studies were established to find out the characteristics of frequency distributiom for the number of occurrence and magnitude, probable flood flows according to the return periods, design floods, and design frequency factors for the studying basins in relation to the risk levels which can be correlated with design return period and the life of structure in the non-annual exceedance series. Eight watersheds along Han, Geum, Nak Dong and Seom Jin river basin were selected as studying basins. The results were analyzed and summarized as follows. 1. Poisson distribution and Exponential distribution were tested as a good fitted distributions for the number of occurrence and magnitude for exceedance event, respectively,at selected watersheds along Han, Geum, Nak Dong and Seom Jin river basin. 2.Formulas for the probable flood flows and probable flood flows according to the return periods were derivated for the exponential distribution at the selected watersheds along Han, Geum, Nak Dong, and Seom Jin river basin. 3.Analysis for the risk of failure was connected return period with design life of structure in the non-annual exceedance series. 4.Empirical formulas for the design frequency factors were derivated from under the condition of the return periods identify with the life of structure in relation to the different risk levels in the non-annual exceedance series. 5.Design freguency factors were appeared to be increased in proportion to the return periods while those are in inverse proportion to the levels of the risk of failure. Numerical values for the design frequency factors for the non-annual exceedance series ware appeared generally higher than those of annual maximum series already published by the first report. 6. Design floods according to the different risk levels could be derivated by using of formulas of the design frequency factors for all studying watersheds in the nor-annual exceedance series.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.707-716
• /
• 2009

The role of cost modeller is to facilitate the design process by systematic application of cost factors so as to maintain a sensible and economic relationship between cost, quantity, utility and appearance which thus helps in achieving the client's requirements within an agreed budget. There are a number of research on cost estimates in the early design stage based on the improvement of accuracy or impact factors. It is common knowledge that cost estimates are undertaken progressively throughout the design stage and make use of the information that is available at each phase, through the related research up to now. In addition, Cost estimates in the early design stage shall analyze the information under the various kinds of precondition before reaching the more developed design because a design can be modified and changed in all process depending on clients' requirements. Parametric cost estimating models have been adopted to support decision making in a changeable environment, in the early design stage. These models are using a similar instance or a pattern of historical case to be constituted in project information, geographic design features, relevant data to quantity or cost, etc. OLAP technique analyzes a subject data by multi-dimensional points of view; it supports query, analysis, comparison of required information by diverse queries. OLAP's data structure matches well with multiview-analysis framework. Accordingly, this study implements multi-dimensional information system for case based quantity data related to design information that is utilizing OLAP's technology, and then analyzes impact factors of quantity by the design criteria or parameter of the same meaning. On the basis of given factors examined above, this study will generate the rules on quantity measure and produce resemblance class using clustering of data mining. These sorts of knowledge-base consist of a set of classified data as group patterns, of which will be appropriate stand on the parametric cost estimating method.

• Journal of the Korea Furniture Society
• /
• v.25 no.2
• /
• pp.104-111
• /
• 2014

Design is one of those elements to create an artificial environment, improving human life. It also signifies some concrete work and plan for better life in the present environment, and it is even believed to be an act of consideration for the sake of human beings. This consideration design would be included to design which deals not only with truths and values being demanded in a new era but also with various users, and it is design that attaches values to behaviors of the users, searching for new values while studying user-centered behaviors. It is regarded as a part of the consideration design in that it is able to make plans and extract design factors using affordance while it helps any users to use as considering the user-centered behaviors. Design factors of such affordance has been inherited and developed from the Bauhaus principle, and the spirit of Bauhaus is believed to have a great influence on contemporary furniture design while being a matrix of modern design. A follow-up study will look into backgrounds and cases of social design, one of those consideration design factors, while proposing directions on how to develop contemporary furniture design.