Browse > Article
http://dx.doi.org/10.7467/KSAE.2015.23.5.545

A Design of the Cooling Channel in the Bipolar Plate of PEMFC Using Experimental Design Method  

Zhang, Xia (School of Mechanical Engineering, College of Engineering, Chonnam National University)
Kwon, Oh-Jung (School of Mechanical Engineering, College of Engineering, Chonnam National University)
Oh, Byeong Soo (School of Mechanical Engineering, College of Engineering, Chonnam National University)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.23, no.5, 2015 , pp. 545-552 More about this Journal
Abstract
The heat generation in PEMFC is proportional to the electrical power output. Therefore, when the fuel cell produced the maximum output, the maximum heat was generated. In order to maintain the performance of the fuel cell, thermal management is as important as pressure and humidity conditions of the reactive gas. In this study, considering the thermal management for the maximum output operation, the optimal cooling channel design specifications of bipolar plate are found for the highest cooling performance. In the current bipolar plate research, many studies focused on analyzing various factors individually but there is no more study on the interaction between design factors. In this study, the heat transfer was simulated by COMSOL Multiphysics with the main design factors which are designated shape, width and rib length. One of the experimental design methods, general full factorial design method, was used to analyze the main factor and interaction on average temperature and maximum temperature for the design specification of fuel cell bipolar plate. When analysis result shows that all of these three factors are highly important, it can confirm that the interaction occurs between the factors.
Keywords
PEMFC; Bipolar plate; Cooling channel; Experimental design method; Full factorial design;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 C. E. Thomas, "Fuel Cell and Battery Electric Vehicles Compared," International Journal of Hydrogen Energy, Vol.34, No.15, pp.6005-6020, 2009.   DOI
2 P. Corbo, F. Migliardini and O. Veneri, "Dynamic Behaviour of Hydrogen Fuel Cells for Automotive Application," Renewable Energy, Vol.34, No.8, pp.1955-1961, 2009.   DOI
3 F. C. Chen, Z. Gao, R. O. Loutfy and M. Hecht, "Analysis of Optimal Heat Transfer in a PEM Fuel Cell Cooling Plate," Fuel Cells, Vol.3, No.4, pp.181-188, 2003.   DOI
4 A. P. Sasmito, K. W. Lum, E. Birgersson and A. S. Mujumdar, "Computational Study of Forced Air-convection in Open-cathode Polymer Electrolyte Fuel Cell Stacks," Journal of Power Source, Vol.195, No.17, pp.5550-5563, 2010.   DOI
5 W. A. N. Mohamed and R. Atan, "Computational Analysis on Thermal Performance and Coolant Flow of an Air-cooled Polymer Electrolyte Membrane Fuel Cell," Journal of Mechanical Engineering, Vol.7, No.2, pp.15-36, 2010.
6 W. A. N. Mohamed, R. Atan and A. Ismail, "Heat Transfer Simulation of a Single Channel Air-cooled Polymer Electrolyte Membrane Fuel Cell Stack with Extended Cooling Surface," International Conference on Science and Social Research, pp.91-96, 2010.
7 J. Scholta, M. Messerschmidt, L. Jorissen and C. Hartnig, "Externally Cooled High Temperature Polymer Electrolyte Membrane Fuel Cell Stack," Journal of Power Sources, Vol.190, No.1, pp.83-85, 2009.   DOI
8 K. P. Adzakpa. J. Ramousse, Y. Dube, H. Akremi, K. Agbossou, M. Dostie, A. Poulin and M. Fournier, "Transient Air Cooling Thermal Modeling of a PEM Fuel Cell," Journal of Power Source, Vol.179, No.1, pp.164-176, 2008.   DOI
9 C. Spitta, J. Mathiak, M. Kokupil and A. Heinzel, Coupling of a Small Scale Hydrogen Generator and a PEM Fuel Cell, WILEY-VCH Verlag, Weinheim, 2007.
10 S. T. Hwang, S. H. Cheon, J. S. Song, Y. H. Yun, B. H. Kim, X. Zhang, D. U. Kim, D. Hyun and B. S. Oh, "A Study to Improve PEMFC Performance by Using Electro Polishing and CrN Coating on Metal Bipolar Plate," Transactions of KSAE, Vol.22, No.4, pp.65-71, 2014.
11 A. Faghri and Z. Guo, "Integration of Heat Pipe into Fuel Cell Technology," Heat Transfer Engineering, Vol.29, No.3, pp.232-238, 2008.   DOI
12 R. A. Fisher, The Design of Experiments, 4th Edn., Oliver and Boyd, Edinburgh, 1947.
13 O. J. Kwon, C. M. Oh, H. S. Shin and B. S. Oh, "Study on Power Characteristics in the PEMFC Parallel Channel with Baffle through Numerical Analysis," Journal of the Korean Electrochemical Society, Vol.17, No.3, pp.193-200, 2014.   DOI
14 F. Barbir, PEM Fuel Cells: Theory and Practice, Academic Press, Waltham, 2005.
15 J. Larminie and A. Dicks, Fuel Cell Systems Explained, 2nd Edn., John Willey & Sons, New York, 2008.