• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.507-512
• /
• 2002

Generally gneiss regions catagolized as metamorphic ground are very complicated and difficult for geotenical engineer to establish stability, this slopes include falt zone and many folding structures. therefore the slope in this study is very complicated and highly wheathered and framentation conditions are irregular by this study, we hope that geotechical engineers who are confronted with the same complicated slope as this slope are doing his job easily and they know which system are adequate to establish the slope stability in large-scale slope with complicated geological structure, and besides through our work flow and modeling process, we hope that our study can be useful for geotenical engineer who may work slope design and construct in complicated ground.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2215-2217
• /
• 1998

A remote maintenance system, which enables an engineer to check and treat machines installed at remote site with the help of data communication, has been developed. The maintenance of machines with the traveling of engineers is much costly in time and economically. With the developed system, the engineer at the remote site can diagnose malfunctioning machines. The remote maintenance system is composed of video conferencing system, camera control system and signal aquisition system. The developed system has been tested on the 100Mbps ATM network to evaluate its ability to diagnose remote machines.

• 기술사
• /
• 제44권6호
• /
• pp.45-50
• /
• 2011

As the Deep Cement Mixing Method is composed of drilled natural soft soil structure and injected cement slurry to be mix together in it, the nature of excavated ground is influenced directly to the application of constructability. Also the nature of in situ soil is the main material, the mix design and construction work plan should be established before the investigation of soil which is performed through the whole site confirm the soil parameter before construction. The nature of investigated soil and water level as should be performed accurately.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.1-4
• /
• 2002

A automatic production system was developed for high productivity and safety. The semi-progressive die was unfavorable for more productivity, safety, material extravagance and incongruent high-speed production. Developed progressive die is suitable for the high production and guarantee triple production by acceptance of three array type for automobile adjust plate. We adopt Pro-$Engineer{\circledr}$ for three dimensional computer aided design suitable for the disassembly and assembly evaluation. The conclusion of this study is as follow. First, press die parts solid modeling system is built by using Pro-$Engineer{\circledr}$ through this research and verified allowable tolerance and possibility of assembly and disassembly of parts. Therefore we can reduce die manufacturing time and cost. Second, We produce 1000 units pet hot coil 1ton by traditional method, but we can acomplish material saving effect about 12% as 120 units in case of new progressive die. Fourth, we acomplished manufacturing cost curtailment effect more than 20% in comparison with traditional method.

• 기술사
• /
• 제30권2호
• /
• pp.52-60
• /
• 1997

As a matter of fact, the better architecture is very important things to create our generation and culture. Also, construction quality improvement is critical necessary to keep the culture and international competition which must be obtained through the consciousness reform of persons concerned. Therefore, the purpose of this proposal is to provide the basic point for establishing a practical compaign against construction failures. In this year, we have to remember the facts that's faced on market opening in construction market which is agreed in WTO. The contents of subject are as follows : 1 ) Subconscious reform of technician and projector concerned 2) Responsable consciousness of original contractor 3) Workmanship of skilled labor 4) Reasonable budget and bidding included sub-contractor 5) Advanced design and engineering quality 6) Certification of consulting engineer

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.188-195
• /
• 2022

Although issuing change orders is a common practice in the construction phase of any project, non-structural utility subcontractors are struggling and seek to find a way to reduce change orders. Therefore, this paper presents the analysis results on change orders to cultivate possible suggestions and solutions on how to reduce or minimize change orders in mechanical, electrical, and plumbing (MEP) works. Change orders in non-structural utility works are analyzed based on six categories such as rerouting and change of location, changes in weight, rejected design by Office of Statewide Health Planning and Development, District Structural Engineer, or the Structural Engineer of Record, unforeseen conditions, changed equipment, and owner-initiated change. The analysis findings showed that rerouting and changing location is the most significant cause, followed by unforeseen conditions. The results not only contribute to the existing body of knowledge on change order research area, but also help MEP contractors reduce the time and cost of change orders.

• 청정기술
• /
• 제6권1호
• /
• pp.1-6
• /
• 2000

현재 우리나라에서는 제품 설계 단계에서, 기능 설계와 제품의 생산 문제를 동시에 해결하려는 concurrent engineering이 발전되고 있고, 여기에 추가하여 environment의 영향을 고려한 concurrent 설계의 개발이 필요한 시기가 되었다. 청정 기술이 제품 설계단계에서 활용될 수 있는 예를 제시한다. 또한 design engineer가 환경문제를 해결하게 하기 위하여는, 기초기능 specification 단계부터, 제품별 환경 spec과 같은 data base가 PC에서 쉽게 점할 수 있도록 청정기술자의 도움이 필요하다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.176-183
• /
• 1995

The design process of pre-cast concrete member needs various design parameters and the engineer's experiences. The introduction of knowledge-based system in the design of pre-cast concrete member enables us to design complicated members using the designer's heuristics. The objectives of this research are to study useful methodology for representing knowledge and data in the development of knowledge-based system and to show the application of methodology by developing a prototype sysytem for design of pre-cast concrete member. This paper nrst describes methodology for building knowledge-based system. It then presents knowledge-based system for pre-cast concerete member design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.114-117
• /
• 2005

An expert system is a system that employs human knowledge captured in a computer to solve problem that ordinarily require human expertise. Well-designed expert systems imitate the reasoning processes experts use to solve specific problem. Specially, expert systems are used to the engineer in manufacturing industry for the process control, production management and system management. In this paper, we propose the design process expert system for product design process in manufacturing industry and we present introduction and contents of design process expert system methodology and software for the air purifier design system. This system will be helpful to improvement of design process for the air purifier production.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.283-287
• /
• 2003

In recent years, design of an optimal blank shape is very important for sheet metal forming process in the automobile industry because the raw material cost rate is significant part in the automobile industry. With the design of an optimal blank shape, the engineer can protect a blank from an excessive holding force to improve the quality and reduce the ratio of material scrap. Therefore design of an optimal blank shape is inevitable in sheet metal forming process. However, if it causes a complicated shape of blank, it may be difficult to do the blank layout optimally. In this study, we developed software of optimal blank layout connected with the software of optimal blank shape design which was created in the past by the present authors. And by using these softwares, we would like to present the method in order to get optimal utilization ratio easily and precisely within short time for the sequence of works from design to blank layout.