• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.291-298
• /
• 2018

Purpose : 본 연구는 문제중심학습이 간호학과 학생의 학업 탄력성, 학습 몰입, 학업 동기에 미치는 영향을 확인하기 위한 비동등성 유사 실험연구이다. Method : 일반적 특성에 따른 실험군과 대조군의 동질성 검사와 종속변수에 따른 실험군과 대조군의 동질성 검증은 ${\chi}^2-test$, t-test로 분석하였다. 실험군과 대조군의 교육의 효과는 각각 paired t test로 분석하였으며 실험군과 대조군의 집단 내 효과 차이 분석은 independent t test로 분석하였다. Result : 실험군과 대조군의 중재 전 후의 학업 탄력성을 비교해 보면, 실험군은 교육 전 평균 $3.88{\pm}.36$, 교육 후 $4.00{\pm}.38$로 유의한 증가를 나타냈으며(p<.001) 대조군은 교육 전 평균 $3.86{\pm}.43$, 교육 후 평균 $3.93{\pm}.17$로 유의한 차이가 없었다. 학습 몰입도는 실험군은 교육 전 평균 $3.31{\pm}.41$, 교육 후 $3.51{\pm}.42$로 유의한 증가를 나타냈으며(p<.001) 대조군은 교육 전 평균 $3.45{\pm}.42$, 교육 후 평균 $3.48{\pm}.47$로 유의한 차이가 없었다. 학업 동기는 비교해 보면, 실험군은 교육 전 평균 $3.26{\pm}.23$, 교육 후 $3.47{\pm}.21$로 유의한 증가를 나타냈으며(p<.001) 대조군도 교육 전 평균 $3.32{\pm}.30$, 교육 후 평균 $3.46{\pm}.32$로 유의한 증가를 나타났다(p=.002). Conclusion: 본 연구를 통하여 PBL 교육을 받은 실험군에서 학업 탄력성, 학습 몰입, 학업 동기가 모두 유의하게 변하는 것을 관찰하였고 강의식 교육을 받은 대조군에서는 학업 동기가 유의하게 증가하는 것을 확인하였다. 본 연구를 통하여 더욱 다양한 교수법이 개발될 수 있도록 더욱 많은 노력이 필요하다는 것을 알 수 있었다.

• 한국산림과학회지
• /
• 제10권1호
• /
• pp.7-16
• /
• 1970

한국(韓國)에 산(產)하는 죽종(竹種)은 19종(種)이 분포(分布)되고 있으나 이중(中) 유용종(有用種)은 수종(樹種)에 불과(不過)하며 그 중(中)에서도 Phyllostachys속(屬)이 주(主)로 해태(海苔)의 생산원재(生產原材) 또는 죽세가공품(竹細加工品)의 재료(材料)로서 다각도(多角度)로 사용(使用)되고 있어 69년도(年度)에만도 전라(全羅) 남도(南道)에서 가공품(加工品)을 생산(生產)하여 10여국(餘國)에 2억(億)4백만(百萬)원의 외화(外貨)를 벌어 들였다. 동남아(東南亞)의 특산(特產)인 죽류(竹類)는 문화(文化)의 발달속도(發達速度)에 따라 가공품(加工品)의 생산기술(生產技術)이 향상(向上)되고 재료(材料)의 생산(生產)이 증가(增加)되면 국가(國家)의 산업발전(產業發展)에 도움이 되리라 믿어 본인(本人)은 원형(圓形)으로만 사용(使用)하던 죽(竹)을 사각(四角)으로 조성(造成)하여 거기에 아름다운 무늬를 삽입하여 죽세가공품(竹細加工品) 생산(生產)에 또는 건축(建築)에 있어서 실내(室內)장식등에 크게 사용(使用)될 수 있으리라 믿어 이 시험(試驗)에 착수(着手)하였든 바 그 결과(結果)로서 죽순(竹筍)의 목통직경(目通直經)은 클수록 성적(成積)이 좋아 직경(直經) 7.5cm는 72%의 성공율(成功率)을 나타냈으며(Fig. 5참조(參照)) 죽순(竹筍)의 길이는 30cm정도(程度)의 것이 100%의 사각죽(四角竹)이 완성(完成)되었다(Fig. 6참조(參照)). 고정(固定)되어가는 강도(强度)의 변화(變化)는 기일(期日)이 지날수록 강(强)하여져갔으며 우기(雨期)와 Lux의 차(差)에는 별지장(別支障)이 없었다(Fig. 7. 8참조(參照)). 임의(任意)로 죽재(竹材)를 생장당시(生長當時)에 구부리기 위(爲)한 굴곡시험(屈曲試驗)은 90도(度)까지는 구부릴 수 있었다.(Fig. 10) 약품처리(藥品處理)에 의(依)한 무늬삽입 시험에 있어서는 약품(藥品)의 종류(種類)와 배합방법(配合方法)(Table. 2)에 따라서 Fig. 12. 13. 14와 같이 무늬에 차이(差異)가 생겼으나 착색(着色)과 삽입에는 완전(完全)히 성공(成功)하였다. 이 결과(結果)에 따라 앞으로 사각죽(四角竹)을 다량생산(多量生產)하면 가공품제작(加工品製作)에 크게 이용(利用)되어 국가산업발전(國家產業發展)에 이바지 되리라 믿는다.

• 패션비즈니스
• /
• 제6권2호
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• 한국조경학회지
• /
• 제44권6호
• /
• pp.40-50
• /
• 2016

본 연구는 라이프스타일에 따른 도시농업 유형 선호도를 분석함으로써 향후 "도시농업활성화 정책" 수립을 위한 기초 자료를 제시하는데 목적이 있다. 연구방법은 서울특별시 자치구 중 도시농업 활성화를 지원할 수있는 근거를 마련한 9개자치구민을 대상으로 설문조사를 실시하였다. 이를 통해 라이프스타일과 도시농업 선호활동과의 인과관계를 검정하고자 하였다. 연구결과, 첫째, '건강추구형'이 도심형 도시농업에 유의한 것으로 나타났다. 이는 안전한 먹거리와 건강을 추구하는 도시민이 도시농업 교육 프로그램에 적극적으로 참여하고, 도심 내 자연경관 향상을 위해 식물 및 경관작물 심기, 도시농업박람회 참가 등의 도심형 도시농업 활동을 선호하는 것으로 나타났다. 둘째, '여가활동형'이 주택활용형 도시농업에 유의한 것으로 나타났다. 주로 취미 및 여가활동을 중시하는 도시민은 실내 생활 속에 텃밭 가꾸기, 아파트 베란다 공간을 활용한 텃밭 가꾸기 등 주로 텃밭 가꾸기 등의 주택활용형 도시농업 활동을 선호하는 것으로 나타났다. 셋째, '건강추구형'이 학교교육형 도시농업과, 농장 및 공원형 도시농업에 유의한 것으로 나타났다. 건강을 추구하는 도시민은 교육농장 참여 및 학교텃밭 가꾸기, 도심 외곽 개인 농장 운영, 도시농업 박람회 참가 등의 참여 활동을 선호하는 것으로 나타났다. 넷째, '가족지향형'이 학교교육형 도시농업에 유의한 것으로 나타났다. 가족지향형 도시민은 학교와 연계된 다양한 도시농업 교육 및 활동에 적극 참여하는 활동을 선호하는 것으로 나타났다. 본 연구는 도시농업 유형을 고찰하고, 라이프스타일과 도시농업 유형 선호도와의 영향관계를 살펴, 도시농업의 실수요자의 성향 및 선호활동을 알아보는데 연구의 의의가 있다.

• 한국병원경영학회지
• /
• 제7권1호
• /
• pp.41-63
• /
• 2002

The purpose of this study is to analyze the interrelation of influential factors in organizational conflict and organizational commitment. The data for this study were collected through a self-administered survey with a structured Questionnaire to 1,167 subjects from several nursing staff members, administration staff members and medical technicians of six hospitals. In this analysis frequency test, t-test, ANOVA, hierarchical multiple regression and structural equation model were used. The main findings of this study are as follows. 1. Factors which influence organizational conflict were analyzed. The type of occupation and the year of service were socio-demographic variables which influenced organizational conflict positively. Adjusted R square was 0.03. Perceptions on organizational structure and organizational culture were analyzed with two- level variables that were added. The findings were as follows. Adjusted R square increased to 0.25. The year of service, internal process culture and rational goal culture were positive variables. The design of organizational structure, human relations culture and open system culture were negative variables. 2. Variables which influence organizational commitment were analyzed. Age and the year of service were positive variables, while academic background based on high school education was a negative variable. Adjusted R square was 0.16. Perceptions on organizational structure and organizational culture were analyzed with two-level variables that were added. The findings were as follows. The characteristics of organizational structure, human relations culture and organizational culture were positive variables. Adjusted R square increased to 0.55. The variables of organizational conflict were added in 3 steps. Findings were as follows. The variables of hierarchical conflict showed negative influence and were included in two-level influential variables. Adjusted R square increased to 0.56. 3. Structural equation model was analyzed in order to examine the relation between organizational structure and the variables of organizational culture, organizational conflict and organizational commitment. Thirteen path coefficients out of seventeen path coefficients were significant. Age had negative influence on organizational conflict and positive influence on organizational commitment. The year of service had positive influence on organizational conflict and organizational commitment. The design of organizational structure, human relations culture and open system culture had negative influence on organizational. conflict. They had positive influence on organizational commitment. Internal process culture and rational goal culture had positive influence on organizational conflict. Organizational conflict had negative influence on organizational commitment. The squared multiple correlation of this model was 25.1% in organizational conflict and 52.7% in organizational commitment. The conclusion of this study is as follows. Factors in organizational structure and organizational culture, rather than socio-demographic factors, had a stronger influence on the organizational conflict and organizational commitment of hospitals. In order to decrease organizational conflict, to increase organizational commitment and to maximize the effectiveness of hospital management, it is necessary to understand the overall relation between organizational structure, organizational culture, organizational conflict and organizational commitment, with the effort of improving personalized factors and individual factors of organization management.

• 설비공학논문집
• /
• 제27권7호
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• 디자인학연구
• /
• 제19권2호
• /
• pp.73-80
• /
• 2006

이 논문은 3차원 디지털 애니메이션 제작 시 국내산업 환경에 맞는 소규모 제작진행방식을 제안하는 것이다. 컴퓨터를 이용한 3차원 디지털 애니메이션 제작이 보편화되어 이제 많은 작가와 기업들이 앞을 다투어 제작진행 중이며 이미 상당한 양의 제작물이 발표되었으나, 국내 3차원 디지털 애니메이션 제작기법의 적용은 여전히 해외산업 환경에 비해 저조한 편이다. 많은 원인이 있겠으나 그 중 하나로 국내 형 3차원 디지털애니메이션 제작구조의 개발이 미흡한 점을 들 수 있다. 해외의 대규모 제작구조 도입은 국내 3차원 애니메이션 산업을 양적으로는 확대시켰으나 이제는 작품의 질과 효율성을 감안하여 보다 국내현실에 맞고 실속 있는 제작진행방식 이 필요하다. 비순차적(非順次的 : non-sequential) 제작구조는 국내의 어려운 제작 여건을 감안하여 고안된 규모가 작은 제작진행방식으로 주로 예산과 인력이 한정된 3차원 디지털애니메이션에 효과적이다. 비순차적 구조는 제작비의 절감, 제작인력의 효과적인 운용, 제작기간의 단축 둥의 주요특징 외에도 작업자의 작업관여도를 증가시키고 기술습득을 원활하게 하는 등 많은 장점을 지니고 있다. 해외의 대형 애니메이션 제작 방식인 계층구조형태, 즉 하향식 파이프라인(pipeline) 제작진행방식이 여러 단계를 거치며 여러 종류의 많은 제작인력이 복잡하게 얽혀서 제작과 확인(conn)이 반복되는 것이라면 비순차적 구조는 소수의 인력이 작품에 대한 관여도를 극대화하여 확인보다는 이해와 합의를 통해 일인다역을 수행하는 환경을 제공하는 것이다. 대형 제작물에 참여한 각각의 제작인력이 자신에게 국한된 작업 외에 다른 제작단계나 영역에 참여할 기회가 없는 반면 비순차적 구조는 참여제작인력이 처음부터 완성까지의 과정동안 모든 제작진행흐름을 파악하기 때문에 제작이 진행될수록 작업에 가속이 붙는다. 비순차적 구조는 기본적으로 애니메틱(animatic)을 가장 중요하게 다룬다. 초기단계에 완성된 애니메틱을 계속 보안, 수정하면서 모든 제작인력이 '애니메틱의 완성이 최종 애니메이션의 완성'이라는 공동의 목표를 위하여 수평적인 의견도출과 각자 역할의 확대 및 변화를 시도할 수 있는 제작흐름이 되도록 고안된 제작구조이다.

• Journal of Preventive Medicine and Public Health
• /
• 제16권1호
• /
• pp.163-192
• /
• 1983

In order to facilitate the Korean government's efforts in integrating family planning and maternal & child health at the primary health care level (or township level), the Soon Chun Hyang College of Medicine, with the financial and technical assistance of WHO, has under-taken a service research project. The project has employed a quasi-experimental study design introducing interventions tat provide crucial factors lacking in the ongoing government programs such as midwives and qualified referral physicians. The study is being conducted in three locations, one control area and two study areas. Before introducing trained Nurse/Midewives into the study areas, a baseline prevalence survey was undertaken from 15 July 1981 to 10 August 1981 in selelcted townships of Seosan County. In this sample survey of bath the study and control areas, 2,484 eligible women (97% reponse rate) were interviewed to obtain benchmark data on basic evaluation indicators related to family planning and maternal and child health. The salients results were summarized as follows.: 1. CONTACT RATES WITH HEALTH WORKERS; During the year preceding the survey, 12% of women were visited by government health workers. The primary reason for such visits by health workers was family planning (45% of the visits). About 34% of the women visited the health centers during the year. The primary reason for visiting health centers was immunizations for their children (45% of the visits). 3. FAMILY PLANNING USE RATE; The baseline data showed little difference between women in the study area and the control area on contraceptive use. Approximately 59% were currently using some methods. However, among those current users, almost half were practicing less effective methods of birth control such as rhythm or withdrawal. Among other methods, the tubectomy was the most popular (16%), while use of the IUD, oral pill and condom together reached only 14%. 3. PRENATAL CARE RATE; About 75% of the women reported no prenatal care for their last births (the youngest child of each women), Additionally, among women received prenatal care, over half had only one visit. 4. ATTENDANCE AT DELIVERY; Most of the women surveyed (over 80%) were attended by a non-medical person during their last delivery. These figures are somewhat comparable to the national figure of 84% for remote areas. 5. POSTNATAL CARE; The proportion of women reporting postnatal care was only 4.5%, and postnatal care was not received by the majority of women surveyed. 6. CHILD HEALTH CARE: In contrast to the low rate of maternity care for women themselves, most women reported obtaining immunization care for their children. About 75% of the women obtained Polio and/or DPT, 58% BCG, and 44% Measles vaccine for their children. However, in terms of illness care, while 35% of the women stated that their youngest child had been sick during the month preceding the survey, only 28% of these women took their child to the clinic for treatment. 7. COMPLICATIONS OF PREGNANCY AND DELIVERY AND ABNORMALITIES IN THE NEWBORN; Among all last deliveries, 18% of the women had pregnancy complications and 9% of the women had complications during delivery About 5% of the women reported abnormality in their most recent newborn. 8. REPRODUCTION EFFICIENCY; PERINATAL MORTALITY AND INFANT MORTALITY Based on data from the pregnancy history in this survey, reproduction efficiency was estimated. Out of the 11,154 pregnancies reported by all women surveyed, foetal loss was 21% (almost 16% were induced abortions) and infant deaths before reaching one year old were 3.1%. The reproduction efficiency was, therefore, reduced to 76%. In terms of perinatal and infant mortality rates, the former was 40.2 per 1,000 total births and the latter was 39.3 per 1,000 live births. Both rates described J shaped relationships with age of mothers and parity, and they were also correlated with birth interval and mother's education. In summary, this baseline survey data indicated a need for (1) improving contraceptive practices with more effective methods to prevent unwanted pregnancies and (2) providing better services for maternal and child care to protect wanted pregancies. In the Korean rural setting. the author believes that the latter is more important as the value of each child has increased as a result of the family planning campaign for the past two decades. This calls for more effective integration of Family Planning and MCH programmes to meet the needs of the family in each stage of the child bearing and rearing period with deploying more qualified personnel than the current government program personnel.

• 헤리티지:역사와 과학
• /
• 제56권2호
• /
• pp.172-203
• /
• 2023

<청담도(淸潭圖)>는 겸재 정선(謙齋 鄭敾, 1676~1759)이 영조 32년(1756)에 삼각산(三角山) 청담(淸潭) 지역을 유람하고 그린 병풍도(屛風圖) 형식의 진경산수화(眞境山水畫)로 본 연구를 통해 발굴되었다. 와운루(卧雲樓)와 농월루(弄月樓)로 구성된 청담별업(淸潭別業)은 노론 낙론계(洛論系) 문회와 백악시단(白嶽詩壇)의 시회가 열린 당대 문화예술 활동의 거점이며, 정선과 그림의 주문자 홍상한(洪象漢, 1701~1769)의 연결점이 된다. <청담도>는 1756년 가을비가 내릴 당시, 정선이 그의 제자 김희성(金喜誠, 1723~1769)과 청담에 막 도착하여 홍상한과 만났을 때를 회상하면서 그린 그림이다. 인수봉(仁壽峰)부터 동구(洞口)까지 굽이쳐 흐르는 골짜기를 주안에 두고 그려졌으며, 청담 지역의 전경을 담으면서도 동(洞)의 유래가 되는 경물(景物) 청담(淸潭)을 강조하는 중의적인 화제를 사용하였다. 과감한 쇄찰(刷擦)과 습윤한 피마준(披麻皴), 부드러운 미점(米點)의 표현, 세밀한 필선 등은 정선 노년의 절정에 이른 원숙함을 보여준다. 특히, 암산(巖山)과 토산(土山)의 대비와 개수의 대칭을 고려하여 음양(陰陽)의 조화를 꾀한 점은 『주역(周易)』에 능통했던 정선이 유람의 최종단계에서 보였던 특유의 진경술(眞境術)로 보았다. 어유봉의 「청담동부기(淸潭洞府記)」는 정선이 청담의 진경을 파악하고 별업정원에 설정된 주요 경물의 물성(物性)을 이해하는 것에 영향을 주었다. 정선이 현장과 차별되도록 그린 별업정원의 특징으로는 수구막이 바위를 변용하고 과장하여 수구를 억눌렀고, 비보림(裨補林)을 치밀하게 조성하여 별업을 가렸으며, 특정 경물의 기능이 발휘되도록 새로운 물체를 창안하였다. 또한, 두 그루 나무를 기울여 대문처럼 정원을 닫고 있으며, 외원과 내원의 경계가 되는 인공의 조산대(造山帶)를 긴 담장처럼 견고하게 조성하여 내청룡과 내백호를 연결하였다. 이는 정선이 청담별업의 부족한 입지를 명당으로 만들기 위해 구사한 비보염승술(裨補厭勝術)로, 풍수적인 묘책으로 고안된 진경술의 일단으로 해석되며, 현실에서는 이루기 어렵지만 그림으로는 가능했던 이상적인 전통조경의 도상학적 구현을 잘 보여준다.

• 마케팅과학연구
• /
• 제20권1호
• /
• pp.59-69
• /
• 2010

绿色环保或者环境意识已经成为商业、政府机关, 以及消费者和世界关注的重要问题. 针对这一情况, 韩国政府宣布, 在本世纪初, "环保建设" 将被作为一种用以鼓励与环保相关的商业活动的方式. 不同层次的韩国服装业, 提出了不同的产品环保的绿色计划. 这些服装产品包括有机产品和回收的衣服. 要想使这些公司成功, 他们需要那些, 在做产品购买,使用, 处置时, 将绿色问题(如环境的可持续性发展)作为一个人判断的一个组成部分的顾客的信息. 这些消费者可以被看成是生态学的关注者. 过去的研究已经对消费者对于环保产品的购买意愿进行了检测. 此外, 还研究了影响生态保护者或绿色消费者的因素. 但是, 只是关注生态保护者在处置或者回收利用衣服上与采购绿色产品相比较是不够的. 服装处置行为有多种途径, 消费者可以用淘汰, 传承(例如: 把它送给一个年幼的弟弟), 赠与, 交换, 出售或者简单的把他扔掉等多种方式来暂时或者永久的摆脱闲置的衣服或贷款项目. 因此, 购买环保产品的行为应该结合服装处置的行为, 从而进一步了解消费者的消费行为与对环境的态度. 本项研究的目的在于提供韩国生态保护者从有利于生态学的角度出发来购买和处理衣服的生活方式的相关信息. 本研究的目标有: 1, 基于韩国对服装处置行为进行分类; 2, 调查人 们人口统计数据, 生活方式和服装消费价值观赏的差异; 3, 在环保的时尚物品的购买意愿和影响因素之间进行比较. 自填式的调查问卷是基于以往的研究设置出来的. 问卷包括10项处置衣服的条款, 22项可持续并且健康的生活方式的条款, 以及19项消费观念的条款. 根据利克特模板的五分量表设置. 此外, 购买两个时尚物品的意愿和每个物品属性的11项特征都是根据利克特模板的七分量表而来, 两种制成羊毛套衫的可以从PET识别代码的回收瓶子中创造出来的涤纶织物这两种套衫选自一个韩国和一个美国的户外运动服装的品牌. 我们对每一种产品的简介和颜色都进行了调查, 人口统计学(即性别, 年龄, 婚姻状况, 教育程度, 收入, 职业)也被包括在内. 在2009年5月份, 研究数据通过一个专业网站的调查机构进行采集, 最后有600份调查问卷可供分析, 这个调查的受访者年龄从20到49岁不等, 平均年龄为34岁. 百分之50的调查者为男性, 大约58%的受访者是已婚者, 其中62%的受访者有大学学位. 主要成分分析和因素最大方法差的方法用以识别衣服处理规模的潜在尺度. 共有三个因素生成(比如: 倒卖行为, 捐赠行为, 不回收利用行为). 基于他们处置衣服的方式对受访者进行了分类, 群类分析被使用, 最终得到了三个部分. 不同的消费者, 被分别贴上 "转售集团", "捐资团体" 以及 "不回收组织" 的标签加以分类, 其中98%是正确的分类. 从人口统计学角度来看, 这三个类别的人在性别, 婚姻状况, 职业和年龄上有显著的差异. 健康可持续的生活方式被缩减为以下5个因素: 自我满意度, 家庭定位, 健康问题, 环境问题和自愿的服务. 这是三个群体中健康可持续的生活方式的最显著的差异. 转售集团和捐赠组表现出在健康可持续的生活方式上的相同倾向, 同时, 不回收集团在生活方式方面呈现最低的平均值. 转售和捐赠团体自称享受和满意这种生活和消费方式, 并且能够利用空余的时间陪伴家人. 另外, 这两组的人关心健康和有机食品, 并试图保护能源和资源. 对服装消费的价值观产生主要影响的三个因素是: 个人价值, 社会价值和实用价值. 因素的方差测试表明转售集团和其他两组之间的因素差异最大. 转售集团相比其他价值更关注个人价值和社会价值. 相比之下, 非回收集团比捐赠集团更关注高层次的社会价值. 比较购买环保产品的意愿上, 转售集团表现出最高的购买A类产品的意愿. 另一方面, 捐赠集团则在小市场中表现出购买B类产品的最高意愿. 此外, 平均分数表明, 购买韩国的产品(B类产品)相比购买美国的产品(A类产品)更合韩国人的心意. 多元线性回归分析法确定了对环保产品的购买的意愿对制造业产品属性的影响. 产品的设计, 价格, 贡献, 对环境的保护, 价格, 兼容性是影响转售集团的显著因素, 另外, 以及对自身形象的影响是捐赠团体的重要因素. 对于非回收集团来说, 设计, 价格等因素是相同的, 自我的形象,对环保运动的贡献, 和环境保护也是很重要的. 而价格因素具有显著性的共通性. 对于B类产品来说, 设计, 合理的价格, 形象等因素是同等的重要, 但是不同的组对购买的特征和意愿有不同的倾向. 健康可持续的生活方式以及服装消费的意向对购买A类产品和B类产品的影响同样被我们所关注. 实际操作者的健康状况和个人价值都是影响购买意愿的重要因素; 然而, 在这三个群体中说服的力度都很低. 结果表明, 分类出来的每组处理服装的行为, 显示着不同服装产品的属性, 个人价值, 和实践者的特点, 这些都影响了他们的购买环保产品的意愿, 结果会使生态保护者提出并组织更合理的生态设计的战略决策.