• 한국주거학회논문집
• /
• 제27권5호
• /
• pp.65-72
• /
• 2016

The purpose of the study was to investigate defect cases in residential interior design, to identify the state of defects, and to categorize types of defect and disputes. In addition, consumer appraisal to residential interior design service were analyzed. The results of this study could provide fundamental information regarding the defects and claims in residential interior design. First, we did literature review for defect disputes in architectural design and interior design. We identify the definition of defects by building life cycle, by state of construction, by activity, and by design performance. Second, we analysed interior design defects cases reported in Korea Consumer Agency & Ministry of Land, Infrastructure and Transport. A total of 49 cases of defect disputes in residential interior design from 2000 to 2015 were investigated. As a result, many defects appeared during the construction stage. A majority of defects cases fall into insulation, water-proofing/leakage work. In terms of design aspects claim, functional and aesthetic defects were claimed. Third, from Consumer Market Evaluation Indicators, raw data from 500 respondents were investigated for the housing repair and interior design. It is found that information comparability, responsiveness to consumer claim, price, and safety are important factors for consumer satisfaction in interior design.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.180-187
• /
• 1999

This document illustrates the relationship between the wire rod wrinkle defect and the roll caliber design. The wrinkle defect is caused by the incongruent rolling conditions of the roll caliber design, the roll adjustment, and the extracting temperature. In this document, we restrict the study scope to the roll caliber design's effect on wrinkle defect at the base of real condition of the No.2 Wire Rod mill, POSCO. There has been wrinkle defect problem in the No.2 Wire Rod Mill, POSCO for many years. The engineers of the wire rod mill have been making efforts to solve the problem. As one of the efforts, we take the samples of the wire rod in the each stands of the 2'nd wire rod mill and then analyze the samples. Through the analysis, we find out the problem of the roll caliber design. So, we suggest the roll caliber design method to be more effective to weaken the wrinkle defect.

• 정보처리학회논문지D
• /
• 제11D권4호
• /
• pp.873-884
• /
• 2004

본 연구에서는 소프트웨어 개발 시 발생하는 결함을 찾아내고, 원인을 식별 및 해결책을 제시하고자 한다. 또한 검출된 결함 항목을 기반으로 하여 결함간의 연관성을 파악하여 opportunity tree로 나타낸다. 신뢰성 있는 소프트웨어를 개발하기 위해서는 소프트웨어와 개발과정에 존재하는 결함을 찾아내고 이를 관리하는 것이 중요한 요인이 된다. 이와 같은 요인은 품질로 귀결되게 되는데, 품질은 비용, 일정과 함께 프로젝트의 성공을 결정하는 주요 요소이다. 따라서 결함 처리 opportunity tree 및 알고리즘을 이용하여 유사한 프로젝트를 수행 시, 결함 예측하여 대비 할 수 있게 된다.

• 정보처리학회논문지D
• /
• 제10D권4호
• /
• pp.709-718
• /
• 2003

본 연구에서는 소프트웨어 개발시 발생하는 결함을 찾아내고, 원인을 식별하고자 한다. 또한 검출된 결함 원인을 기반으로 하여 결함간의 연관성을 파악하여 트리거로 나타낸다. 따라서 결함 트리거를 이용하여 유사한 프로젝트를 수행시, 결함 예측하여 대비할 수 있게 된다.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.623-634
• /
• 2016

Sewer condition assessment involves the determination of defective points and status of aged sewers by a CCTV inspection according to the standard manual. Therefore, it is important to establish a reliable and effective standard manual for identifying the sewer defect. In this study, analytic reviews of the CCTV inspection manuals of the UK, New Zealand, Canada and South Korea were performed in order to compare the defect codes and the protocols of condition assessment. Through this, we also established the standardized method for defect code and revised the calculation method of assigning the condition grade. Analyses of the types and frequencies of sewer defects that obtained by CCTV inspection of 7000 case results, showed that the joint defect and lateral defect were the most frequent defects that occurred in Korea. Some defect codes are found to be modified because those did not occur at all. This study includes a proposed new sewer defect codes based on sewer characteristics.

• 소성∙가공
• /
• 제10권2호
• /
• pp.151-159
• /
• 2001

Flow defect of a piston-pin for automobile parts is investigated in this study. In combined cold extrusion of piston-pin, lapping defect, which is a kind of flow defect, appears by the dead metal zone. This appearance evidently happens in products with a thin thickness to be pierced for the dimensional accuracy and the decrease of material loss. The flow defect that occurs in piston-pin has bad effects on the strength and the fatigue life of piston-pin. Therefore, it is important to predict and prevent defects in the early stage of process design. The best method that can prevent flow defect is removing or reducing dead metal zone through material flow control. The finite element simulations are applied to analyze the flow defect. This study proposes processes for preventing flow defect by removing dead metal zone. Then the results are compared with the experimental ones for verification. These FE simulation results are in good agreement with the experimental ones.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.37-41
• /
• 2011

This paper introduces the special eddy current sensor and its characteristic for bolt hole defect evaluation in gas turbine rotor. In the past, Fluorescent penetration inspection method was used for qualitative defect evaluation in gas turbine rotor bolt hole. This method can defect the bolt hole defect but can not evaluate the defect size. Nowadays, eddy current method is used quantitative defect evaluation due to advanced sensor design technology. And eddy current method is more time and cost saving than the old method. We developed bolt shape eddy current sensor for the rotor bolt hole defect detection and evaluation. The eddy current sensor moves to the bolt hole guided by screw nut and detects the defect on the bolt hole. The bolt hole mock-up and artificial defects were made and used for the signal detection & resolution analysis of eddy current sensor. The results show that signal detection capability is enough to detect 0.2 mm depth defect. And the resolution capability is enough to differentiate 02, 0.5, 1.0 and 2.0 mm depth defect.

• 교육녹색환경연구
• /
• 제9권3호
• /
• pp.1-11
• /
• 2010

In the construction industry, IT based information system has been diversely applied to increase productivity. Although IT device such as PDA, RFID, Barcode, wireless network and web camera has been introduced to gather information in construction site, the effect of the IT device is limited, because of bringing about additional works of engineer. In this paper, we proposed a defect management system which is based on handwritten document digitalization framework for introducing applicability of new IT device, digital pen. By the proposed system, we can effectively gather and input defect information to defect management system by using digital pen and paper like conventional way. Applying the data gathering device, digital pen to defect management, it is able to increase productivity by improving work process, building up and utilizing defect information database of good quality.

• 교육녹색환경연구
• /
• 제16권2호
• /
• pp.1-9
• /
• 2017

Defect dispute in apartment building has become a debating social issue. The system of defect lawsuit and the conciliation process are applicable to solve defect problems in South Korea. Among various defects, painting work defect is a critical issue because it requires large area works and entails a lot of cost. Accordingly, disputes on work procedure and cost calculation are argued oftenly between residents and housing providers. This study reviewed detailed main issues of painting work and propose relevant systems and standards. In this analysis, the main issues are categorized into pre-works, main work, and others. The most recent cases are compared and analyzed for each issue. After the analysis, following conclusions are obtained, (1) In defect lawsuit system, even though surface treatment work in pre-work step is part of main work, it has been separated and regarded as a separate work. (2) Although the main painting work are not significantly different from two systems, it is still necessary to achieve a consensus to close the gap in the methodology of painting area calculation and determining whole painting or partial painting. (3) In addition, unlike the profit rate of general construction works, that of painting work remained the maximum rate and additional charge rate for works carried out in higher place are different among cases. Therefore, it is determined that establishing consistent standards is urgent.

• 대한두경부종양학회지
• /
• 제21권2호
• /
• pp.190-195
• /
• 2005

Background and Objectives: Fibula is the flap of choice for reconstruction of wide mandible defects after tumor ablation surgery. In mandible reconstruction, restoring the mandible frame to provide mandibular contour and dental arch while restoring masticatory function are important. Even though vascularized fibula can be osteotomized freely, proper design and flap insetting is not easy because of its three dimensional structure and difference in design according to the defect sites. We reviewed patients who underwent mandible reconstruction with fibular flaps according to the defect sites and suggest proper modification methods of fibular flap according to the various defects sites after tumor ablation surgery. Materials and Methods: Twelve consecutive mandible reconstruction with fibular free flaps were performed for defects after tumor ablation surgery. Patients were classified into 4 groups according to the type of mandibular defect(Group 1 : defect on central segment including symphysis, Group 2 : defect on lateral segment(with or without central segment) confined to body, Group 3 : defect on body and ascending ramus that does not include the condyle, Group 4 : defect including the condyle). Results: We suggest different modification methods of fibular free flap for each patient group. Group 1, 3 ; contour by using multiple closing wedge osteotomy. Group 2 ; single or double barrel reconstruction without wedge osteotomy. Group 4 ; contour using single or multiple wedge osteotomy and condylar reconstruction with costochondral graft. Conclusion: Fibular free flaps can be contoured to any desired shape after multiple osteotomies to restore various mandibular defects. It is a reliable and versatile method for reconstruction of mandibular defects after tumor ablation surgery.