• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.81-87
• /
• 2006

Purpose: Few researches have been peformed on the dose distribution of the moving organ for radiotherapy so far. In order to simulate the organ motion caused by respiratory function, multipurpose phantom and moving device was used and dosimetric measurements for dose distribution of the moving organs were conducted in this study. The purpose of our study was to evaluate how dose distributions are changed due to respiratory motion. Materials and Methods: A multipurpose phantom and a moving device were developed for the measurement of the dose distribution of the moving organ due to respiratory function. Acryl chosen design of the phantom was considered the most obvious choice for phantom material. For construction of the phantom, we used acryl and cork with density of $1.14g/cm^3,\;0.32g/cm^3$ respectively. Acryl and cork slab in the phantom were used to simulate the normal organ and lung respectively. The moving phantom system was composed of moving device, moving control system, and acryl and cork phantom. Gafchromic film and EDR2 film were used to measure dose ditrbutions. The moving device system may be driven by two directional step motors and able to perform 2 dimensional movements (x, z axis), but only 1 dimensional movement(z axis) was used for this study. Results: Larger penumbra was shown in the cork phantom than in the acryl phantom. The dose profile and isodose curve of Gafchromic EBT film were not uniform since the film has small optical density responding to the dose. As the organ motion was increased, the blurrings in penumbra, flatness, and symmetry were increased. Most of measurements of dose distrbutions, Gafchromic EBT film has poor flatness and symmetry than EDR2 film, but both penumbra distributions were more or less comparable. Conclusion: The Gafchromic EBT film is more useful as it does not need development and more radiation dose could be exposed than EDR2 film without losing film characteristics. But as response of the optical density of Gafchromic EBT film to dose is low, beam profiles have more fluctuation at Gafchromic EBT. If the multipurpose phantom and moving device are used for treatment Q.A, and its corrections are made, treatment quality should be improved for the moving organs.

• Journal of Sericultural and Entomological Science
• /
• v.22 no.2
• /
• pp.1-7
• /
• 1981

Diallel crosses among six silkworm varieties were used as the materials by the randomized block design. and combining ability tests were conducted to determine the relationships between parents and their F$_1$ hybrids. The six parents and their 30 F$_1$ crosses were evaluated for five quantitative characters in each female and male silkworms. Mean values of period(days) of larval stage in mid-parent were more than those of each F$_1$ hybrids. Highly significant differences were shown in the total cocoon weight and weight of cocoon layer of silkworms in F$_1$ hybrids of 111$\times$114, 111$\times$ yunil, 114$\times$yunil and those of reciprocal crosses. From the results, it was recognized that varieties A(111), D(114) and F(yunil) were useful varieties as the parents in breeding of silkworms for increasing the total cocoon weight and weight of cocoon layer, etc. Differences among crosses in apparent degree of heterosis existed for total cocoon weight of cocoon layer and cocoon layer ratio, etc. Mean square values of GCA (general combining ability) were more greater than those of SCA(specific combining ability) for period(days) of larval stage, period (days) of 5th instar and cocoon layer ratio of silkworms. The effects of GCA were differ from parents and characters and the effects of SCA were also differ from parents, characters and crosses.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.90-96
• /
• 1981

To design more efficient agricultural machinery, the accurately measuring system among many other factors is essential. A light-beam oscillographic recorder is generally used in measuring dynamic strain but it is not compatible with the extremely high speed measuring system such as 1,000 m/s, also is susceptable to damage due to vibration while using the system in field. The recorder used light sensitive paper for strip chart recording. The reading and analysis of data from the strip charts is very cumbersome, errorneous and time consuming. A microcomputer was interfaced with A/D converter, microcomputer program was developed for measuring, system calibration was done and the strain generated from a cantilever beam vibrator was measured. The results are summarized as follows. 1. Microcomputer program was developed to perform strain measuring of agricultural machine elements and could be controled freely the measuring intervals, no. of channels and no. of data. The maximum measuring speed was $62{\mu}s$. 2. Calibration the system was performed with triangle wave generated from a function generator and checked by an oscilloscope. The sampled data were processed using HP 3000 minicomputer of Chungnam National University computer center the graphical results were triangle same as input wave and so the system have been out of phase distorsion and amplitude distorsion. 3. The strain generated from a cantilever beam vibrator which has free vibration period of 0.019 second were measured by the system controlled to have l.0 ms of time interval and its computer output showing vibration curve which is well filted to theoretical value. 4. Using microcomputer on measuring the strain of agricultural machine elements could not only save analyzing time and recording papers but also get excellent adaptation to field experiment, especially in measurement requiring high speed and good precision.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.36-45
• /
• 2011

Public open space(Gong-Gae-Gong-Ji) is an important part of the open-space system in an urban environment. Though part of the private sector, it has a significant public function as there are as always open to the free use of every citizen for rest and amenities. A field survey of the public open space of 71 major buildings was carried out to investigate the actual state of public open spaces in the city of Daegu. As a result of this investigation, several point of issues were discussed. In distribution by 'Gu', newly-emerging sub-centers of Daegu-City, such as Bug-Gu and Dalseo-Gu as well as downtown area have many public open spaces. By the use type of buildings, retail buildings such as shopping centers and SSM account for36.6%, business buildings21.1%, and residential and commercial complexes 15.5%, respectively. Location wise, the front areas accounted for the greatest amount(42.9%) with 1 in side area(20%), and 2 in the front/side area(20%), respectively. Degree of division was 1 spot type(45.7%), 2 division type(35.7%). The misuse of public open space for private use, such as shopping and parking lots, was26.6%. On the basis and analysis of the actual status, 6 improvement devices for public open spaces were suggested: 1) The improvement of the legal regulative system, 2) the establishment of design guidelines and strengthening of deliberation, 3) administrative and financial support, 4) periodic supervision and guidance, 5) installment of signs that shows the space is open for use to every citizen, and 6) the participation of citizens in management of public open space.

• Journal of the Korean earth science society
• /
• v.41 no.1
• /
• pp.75-91
• /
• 2020

The purposes of this study are 1) to develop a pre-education program for teaching the basic concepts of systems thinking and STEAM program based on systems thinking and 2) to investigate the effects of the program on middle school students' systems thinking. The subjects were 4 seventh-graders and 4 ninth-graders in a middle school located in the province of Gyeongsangbuk-do. Data related to students' systems thinking was analyzed using the rubrics developed by Hung(2008). The results were reviewed by experts to verify the validity of the rubrics and the reliability of students' system thinking. In addition, the data analyzed with the rubrics, students' awareness of systems thinking, word associations, causal maps and interviews were systematically analyzed to investigate the effects of the program on students' systems thinking. The findings of this study were as follows: First, a pre-education program and teachers' guidebook for teaching and learning the concept of systems thinking and causal maps were developed. The pre-education program consisted of familiar TV entertainment program-Infinite Challenge (Muhandojeon)-with a theme of Global Warming. Second, a STEAM education program based on systems thinking which was composed of 5 steps: Analysis-Design-Build-Assessment-Systems thinking. The major theme of the program was an air extinguisher. The developed STEAM education program had positive effects on improving middle school students' systems thinking abilities such as understanding systems, relations within a system and system generalization. Therefore, it was concluded that the STEAM program could be instrumental for cultivating students' STEAM literacy with improved systems thinking.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.347-365
• /
• 2020

In order to resolve traffic problems in urban areas and to increase the area of green spaces, tunnels in downtown areas are being increased. Additionally, the application of large port smoke extraction ventilation systems is increasing as a countermeasure to smoke extraction ventilation for tunnels with high potential for traffic congestion. It is known that the smoke extraction performance of the large port smoke extraction system is influenced not only by the amount of the extraction flow rate, but also by various factors such as the shape of the extraction port (damper) and the extraction air velocity through a damper. Therefore, in this study, the design standards and installation status of each country were investigated. When the extraction air flow rate was the same, the smoke extraction performance according to the size of the damper was numerically simulated in terms of smoke propagation distance, compared and evaluated, and the following results were obtained. As the cross-sectional area of the smoke damper increases, the extraction flow rate is concentrated in the damper close to the extraction fan, and the smoke extraction rate of the damper in downstream decreases, thereby increasing the smoke propagation distance on the downstream side. In order to prevent such a phenomenon, it is necessary to reduce the cross-sectional area of the smoke damper and increase the velocity of passing air through the damper so that the pressure loss passing through the damper increases, thereby reducing the non-uniformity of smoke extraction flow rate in the extraction section. In this analysis, it was found that when the interval distance of the extraction damper was 50 m, the air velocity passing through damper was 4.4 m/s or more, and when the interval distance of the extraction dampers was 100 m, the air velocity passing through damper was greater than 4.84 m/s, it was found to be advantageous to ensure smoke extraction performance.

• Tunnel and Underground Space
• /
• v.16 no.2 s.61
• /
• pp.109-134
• /
• 2006

Rocks undergo weathering processes influenced by changing in pressure-temperature condition, atmosphere, underground water, and rainfall. The weathering processes change physical and chemical characteristics of the rocks. Once the rocks are weathered, the characteristics of them are changed and, because of the changing, several disadvantages such as rock slope failures and underground water spouts are can occur. Before we cut a large rock slope, therefore, we must analyze current weathering conditions of rocks and predict weathering processes in the future. Through the results of such analyses, we can judge reinforcement works. In order to comply with such requests, chemical weathering sensitivity analysis which was analyzed from chemical weathering velocities and other characteristics of rocks has been applied in several prior construction works in Korea. But, It is defective to use directly in engineering fields because it was developed for soils(not rocks), it has too mny factors must be considered and the relationships between the factors are not clear, and it is hard to explain the weathering processes in engineering time range. Besides above, because it has been used for isotropic rocks, this method is hard to apply to anisotropic rocks such as sedimentary rocks. Acceding to studies from morphologists (e.g. Oguchi et al., 1994; Sunamura, 1996; Norwick and Dexter, 2002), time dependent strength reduction influenced by weathering shows a negative exponential function form. Appling this relation, one can synthesize the factors which influence the weathering processes to the strength reduction, and get meaningful estimates in engineering viewpoint. We suggest this weathering sensitivity characterization method as a technique that can explain time dependent weathering sensitivity characteristics through strength changes and can directly applied the rock slope design.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.1-12
• /
• 2014

Recently, the reenaction of place's memories that were considered sense of place based on its historical and structural characteristic were assumed important topics for recovering and making the park from industrial sites, such as factory, industrial complex, industrial city, labor residential development, landfill, etc., to the public all over the world. This research aimed to conduct some preliminary data for making the park's sense of place highly. So, after conducting the structural forms of sense of place for Seoul Forest and Seonyudo Park that were designed and built by considering its place memories actively, park planning and design implications that were considered its sense of place were suggested. The research results those were derived from the structural forms of sense of place for Seoul Forest and Seonyudo Park's are the following. First, the Structural Equation Modeling(SEM) on Seoul Forest and Seonyudo Park were determined that the natural-physical, artificial-physical, and experiential environmental factors' satisfaction of Seoul Forest and Seonyudo Park have an effect on forming the Sense of Place. In addition, the sense of place was affected by the willingness to visit. Second, according to its physical environment, the experiential factors, such as plays, exercises and etc., were more important relatively. Therefore, experiential factors should be considered significantly with physical factors to make the sense of place highly. Third, even the places were under similar category, the factors' and valuables' relative importance were changed. As the results of structural equation modeling said, specific valuables' related with each factors would be differentiated due to the places' characteristics. For example, the results were showed that natural-physical factor was more important than artificial-physical factor in Seoul Forest. On the other hand, artificial-physical factor was more important than the natural- physical factor. This research carries some significance for applying a quantitative research method(structural equation modeling) to various place to conduct the sense of place's structural model, for suggesting relative specific methods to make the sense of place, and for being a step forward to substance of sense of place. If further studies conduct focusing on various places to draw the forming models of sense of place that were based this research's analysis methods and results, those researches would contribute to make the urban place meaningful, characteristically and affectionately. Furthermore, those researches would contribute in making a humane and competitiveness city.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.27-37
• /
• 2010

This study tries to illuminate the features and values of the Buddhist temple Palkyung by closely examining the forms, structures, and meanings of Tongdo-palkyung(通度八景) handed down at Tongdosa Temple, the best among Korea's Buddhist temples with its three treasures of Buddha, law of Buddha and Buddhist monks. The findings of this study can be summarized as the following. First of all, it reveals the meaning of the geographical name Yeongchuksan(靈鷲山), located to the west of Tongdosa, and a spectacular sight spread like an eagle's spread wings, as well as its location and spatial features. In particular, the arrangement features of a number of attached hermitages clearly show Yeongchuksan's world as being a temple with buddhist treasures. The multi-layered unfolding and centripetal intention of the scenery can be perceived through the shape of the Sshangryongnongju(雙龍弄珠形), around Tongdosa and the feature of the enclosed landscape encircling the steps of Hyeolcheo(穴處) Geumganggyedan. The substances and components of Tongdopalkyung include sound-based spectacles derived from Beoneumgu(梵音具) creating sounds related to religious rituals to enlighten and redeem mankind, such as Yeongji(影池: a holy pond with shadow reflections), drum sounds, and bell sounds along with physical features like pine trees, Dae(臺), waterfalls, Dongcheon (洞天), and a glow in the sky. On the other hand, Palkyung's geographical arrangements exhibit a circular spatial formation based on the main motif as Buddhist symbolism, beginning with the 'Gukjangsangseokpyo(國長生石標)' awakening the territoriality of Tongdosa and locating the first scene 'Mupunghansong(舞風寒松)' in its introductory area, with the features of water, bridge, pine grove, and Iljumun(gate) to stand for the influx. Six other scenes including 'Anyangdongdae(安養東臺)' are placed in the sacred precincts around Daeungjeon and Geumganggyedan while the glow of sunset at 'Danjoseong' just outside the domain closes the symbolic circular formation of the Tongdopalkyung, which coincides with the development of the Mandala figure symbolizing 'Gusanpalhae(九山八海)' centered in Sumisan(須彌山). What is more, Tongdopalkyung, while excluding primary scenic elements inside the temple, maximizes the domain of the mountain's entrance and the effects of the multi-layered mountain, mountain upon mountain, by intensifying the influx and centripetal qualities. The Tongdopalkyung analysis reveals the antithesis of four-coupled scenes conveying buddhist principles and thoughts on the basis of seasons, directions, space and time to display a narrative structural landscape when viewed from the temple's territoriality. Likewise, the characteristics and porch structures of Tongdopalkyung are tools and language of symbols to both externally strengthen the temple's territoriality and to internally, maximize the desires to the Land of Happiness as well as intensify religious wishes and the Mandala's multi-layered qualities through the meanings of time and space.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2002

Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .