• 전기학회논문지
• /
• 제58권1호
• /
• pp.199-202
• /
• 2009

Scan design is currently the most widely used structured Design For Testability approach. In scan design, all storage elements are replaced with scan cells, which are then configured as one or more shift registers(also called scan chains) during the shift operation. As a result, all inputs to the combinational logic, including those driven by scan cells, can be controlled and all outputs from the combinational logic, including those driving scan cells, can be observed. The scan inserted design, called scan design, is operated in three modes: normal mode, shift mode, and capture mode. Circuit operations with associated clock cycles conducted in these three modes are referred to as normal operation, shift operation, and capture operation, respectively. In spite of these, scan design methodology has defects. They are power dissipation problem and test time during test application. We propose a new methodology about scan shift clock operation and present low power scan design and short test time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.273-280
• /
• 2001

In this study, a comparison between the structural design criteria for a catenary system with the maximum design speed of 100km/h and that of 300km/h was performed in order to establish that of 200km/h. According to the result, catenary design criteria for 300km/h operation is more conservative than that for 100km/h operation. This result shows that higher wind pressure and safety factor are adopted to catenary design for 300km/h operation. So, for the purpose of the economic structural design for catenary system, it is necessary to review the adoption possibility of catenary system for 100km/h operation first. In order to review the adoption possibility for catenary system for 100km/h operation, design criteria for 300km/h operation should be chosen for safer catenary structure.

• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.393-400
• /
• 2010

Korea Astronomy and Space Science Institute has been developing one mobile satellite laser ranging system named as accurate ranging system for geodetic observation-mobile (ARGO-M). Preliminary design of ARGO-M operation system (AOS) which is one of the ARGO-M subsystems was completed in 2009. Preliminary design results are applied to the following development phase by performing detailed design with analysis of pre-defined requirements and analysis of the derived specifications. This paper addresses the preliminary design of the whole AOS. The design results in operation and control part which is a key part in the operation system are described in detail. Analysis results of the interface between operation-supporting hardware and the control computer are summarized, which is necessary in defining the requirements for the operation-supporting hardware. Results of this study are expected to be used in the critical design phase to finalize the design process.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.42-49
• /
• 2018

Pilot Aptitude Research Equipment (PARE) is a simulator developed to measure or research pilot aptitude and train for student pilots. Design of an ergonomic PARE operation console is required to operate the equipment effectively. This study carried out five steps : (S1) operator questionnaire survey, (S2) anthropometric design formula development, (S3) usability evaluation, (S4) improvement design, and (S5) validation considering both Physical User Interface (PUI) and Graphic User Interface (GUI) of PARE operation console. The operator questionnaire surveyed needs for each PUI and GUI part of the console from two PARE actual operators. In terms of PUI, the anthropometric design formula was developed by using design variables, body dimensions, target population characteristics, and reference posture related to the PARE console. In terms of GUI, the usability evaluation was conducted by three usability testing experts with a 7-point scale (1 : very low, 4 : neutral, 7 : very high) on GUI of the PARE operation console by seven usability criteria. The improved PARE operation console was designed to reflect the optimal values of design variables calculated from design formula, the results from usability testing, and the operator's needs. The improvement effect was observed by 20 people who had experience with the PARE operation console. As a result of the validation, monitor visibility and cockpit visibility for the improved PUI design and visibility and efficiency for the improved GUI design were significantly increased by more than 90% respectively. The improved design of the PARE operation console in this study can contribute to enhance operation performance of the PARE.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권5호
• /
• pp.529-544
• /
• 2018

Ship owners now demand a new design approach for the rudder that considers detailed design information such as maneuverability and environmental loads etc. on a quantified basis. In this paper, we developed the concept of a safe operation capability chart for the design of a rudder area. The chart can be used as the basis of design considering the maneuverability and environmental loads. To confirm the applicability of the safe operation capability chart for use as the basis of design, four different rudders are assumed in this work. First, it is determined whether or not it is appropriate to design a rudder by applying a conventional design approach based on IMO maneuvering tests. The proposed concept is reviewed for use as the basis of the design by investigating the effect of rudder area on capability charts that are plotted according to the rudder under various environmental conditions.

• 공학교육연구
• /
• 제22권4호
• /
• pp.71-77
• /
• 2019

Capstone design is a very important college course that enhances students' creativity and skills. However, in most universities, the operation of capstone design is operated by the experience and intuition of the advisor, and it is somewhat lacking in the generation of useful results such as patent rights and technology start-up from the capstone design result. In this study, we proposed a performance - based capstone design operation model through patent linkage so that the capstone design class can create creative and useful results. The proposed operating model includes support for research on prior art of patent information utilization, patent right of idea, and technology commercialization. The proposed operating model was directly applied to the capstone design class in the university, and it was confirmed that useful results such as expansion of the scope of the research achievement and technology start - up were created compared to the existing operation model.

• 산업경영시스템학회지
• /
• 제1권1호
• /
• pp.3-10
• /
• 1978

Human Engineering has an intention of design to keep the best condition of man-machine system. Hitherto the conception of design has been used to include existing engineering, as mechanical engineering and electric engineering. But the manufactured goods which to be made these process seem to be fully equipped on physical function, but faults come out discountent repeatedly to users. Accordingly, the development of industrial design has been demanded for improving functional design. It is considered that industrial design has aesthetical sensation. In actually, it must be 1. to provide for utility and safety, 2. easy for maintenance, 3. cheap at cost. 4. possible for sales appeal, 5. and good on appearance. As taking into consideration above five conditions, however, for 삯e sake of comprehend to human being about operating method of machinery and equipment, it should be reflected to design what kind of training way will be needed. Also, it must be considered what a certain extent would be occurred tiredness to human being. in other words. it should be considered the design to be possible the reflect to principle of motion economy, It should not be made adoption of human ability for the designed machinery, it must be adopted the method to consider the design on presuppose about human ability. For study of these actual fact, this paper is summarized the essence of human engineering, and also to find out the methodology as humanistic engineering, It is, Particularly, subdivisionization of operation in flow operation is essential direction of mechanization. Generally. as developing the subdivisionization of operation, it will be lack of satisfaction on operation which worker take charge of. The subdivisionization of operation makes the operation to simple-repetitive, to lose the interest of worker and will be also come into question to the feeling of worker's livelihood. It is human's fundamental desire to have get skilful function or special technique. But the subdivisionization of operation hold in those human's fundamental desire and so that it will likely to lose the sorority of living by this fact. Accordingly, this paper have an operation to hold out the methodology on presuppose about human ability.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.308-322
• /
• 2020

This paper presents a conceptual design for a plant-wide autonomous operation system that uses artificial intelligence techniques. The autonomous operation system has the power and ability to perform the control functions needed for the emergency operation of a nuclear power plant (NPP) with reduced operator intervention. This paper discusses the emergency operation and level of automation in an NPP and presents the design requirements for an autonomous emergency operation system (A-EOS). Then, an architecture that consists of several modules is proposed, with descriptions of the functions. Finally, this paper introduces a prototype of the suggested autonomous system that integrates the authors' previous works.

• 스마트미디어저널
• /
• 제5권1호
• /
• pp.95-103
• /
• 2016

본 연구는 우리나라 디자인컨설팅기업의 운영현황을 미국의 디자인컨설팅기업의 운영현황과 비교해 보고 향후 디자인컨설팅 산업이 질적인 성장을 이루기 위한 방안들을 모색해 보기 위한 목적으로 수행되었다. 분석을 위해 우리나라 109개 디자인컨설팅기업과 미국의 97개 디자인컨설팅기업을 대상으로 디자인컨설팅기업의 운영특성에 대한 설문조사를 수행하였으며, 수집된 자료에 대한 비교분석을 수행하였다. 분석결과 디자인컨설팅기업의 운영특성인 클라이언트기업과의 장기적인 파트너쉽 관계형성, 다학제적 조직구성, 결과중심의 보상체계 운영, 클라이언트기업의 전략적 수준에서의 디자인컨설팅서비스 제공, 능동적인 디자인비즈니스의 실행, 기업간의 융합 네트워킹, 디자인서비스의 전문화 등 7가지 분야에 있어서 한국의 디자인컨설팅기업이 미국의 디자인컨설팅기업에 비해 전반적으로 낮은 수준으로 유지하고 있는 것으로 나타났다. 향후 우리나라의 디자인컨설팅산업이 질적 성장을 거두고 안정적인 산업구조를 이루기 위해 7개 분야의 운영특성에 대한 지속적인 노력이 요구된다고 할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.268-273
• /
• 2002

In this paper, a new parallel multiplier circuit over $GF(2^m)$ has been proposed. The new multiplier is composed of polynomial multiplicative operation part and modular arithmetic operation part, irreducible polynomial operation part. And each operation has modular circuit block. For design the new proposed circuit, it develop generalized equations using frame each operation idea and show a example for $GF(2^m)$.