• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1096-1110
• /
• 2014

Whipping/springing research started in the 50'ies. In the 60'ies inland water vessels design rules became stricter due to whipping/springing. The research during the 70-90'ies may be regarded as academic. In 2000 a large ore carrier was strengthened due to severe cracking from North Atlantic operation, and whipping/springing contributed to half of the fatigue damage. Measurement campaigns on blunt and slender vessels were initiated. A few blunt ships were designed to account for whipping/springing. Based on the measurements, the focus shifted from fatigue to extreme loading. In 2005 model tests of a 4,400 TEU container vessel included extreme whipping scenarios. In 2007 the 4400 TEU vessel MSC Napoli broke in two under similar conditions. In 2009 model tests of an 8,600 TEU container vessel container vessel included extreme whipping scenarios. In 2013 the 8,100 TEU vessel MOL COMFORT broke in two under similar conditions. Several classification societies have published voluntary guidelines, which have been used to include whipping/springing in the design of several container vessels. This paper covers results from model tests and full scale measurements used as background for the DNV Legacy guideline. Uncertainties are discussed and recommendations are given in order to obtain useful data. Whipping/springing is no longer academic.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.442-458
• /
• 2014

Wave induced vibrations increase the fatigue and extreme loading, but this is normally neglected in design. The industry view on this is changing. Wave induced vibrations are often divided into springing and whipping, and their relative contribution to fatigue and extreme loading varies depending on ship design. When it comes to displacement vessels, the contribution from whipping on fatigue and extreme loading is particularly high for certain container vessels. A large modern design container vessel with high bow flare angle and high service speed has been considered. The container vessel was equipped with a hull monitoring system from a recognized supplier of HMON systems. The vessel has been operating between Asia and Europe for a few years and valuable data has been collected. Also model tests have been carried out of this vessel to investigate fatigue and extreme loading, but model tests are often limited to head seas. For the full scale measurements, the correlation between stress data and wind data has been investigated. The wave and vibration damage are shown versus heading and Beaufort strength to indicate general trends. The wind data has also been compared to North Atlantic design environment. Even though it has been shown that the encountered wind data has been much less severe than in North Atlantic, the extreme loading defined by IACS URS11 is significantly exceeded when whipping is included. If whipping may contribute to collapse, then proper seamanship may be useful in order to limit the extreme loading. The vibration damage is also observed to be high from head to beam seas, and even present in stern seas, but fatigue damage in general is low on this East Asia to Europe trade.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권2호
• /
• pp.73-80
• /
• 2011

어선용 고효율 표준 프로펠러 개발에 대해 고찰해 보았다. 어선용 프로펠러의 경우 모형시험이나 이론해석을 통한 정도 높은 설계가 이루어지지 않고 시리즈 데이터(주로 MAU 시리즈)에 의존하여 초기설계 수준에 머무르고 있는 실정이다. 본 연구에서는 52톤 어선을 기준으로 개발되었으며 기존 MAU 형 프로펠러보다 성능이 우수한 프로펠러를 손쉽게 설계, 적용할 수 있는 NACA형 단면을 사용한 시리즈 프로펠러 자료를 제공하기위한 연구를 수행하였다. 또 한 기존의 복잡한 설계 방식 대신에, NACA형 프로펠러를 표준화하여 보다 편리하게 사용할 수 있도록 하였다. 향후 모형 시험을 통한 추진 성능 및 캐비테이션 성능 검증을 수행할 계획이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.61-65
• /
• 2006

수십 msec의 단시간에 큰 추력을 발생시키는 임펄스모타의 무게를 가볍게 하기 위하여 금속재와 복합재를 조합하여 수만 psia의 초고압을 지탱하는 압력용기의 설계이론을 개발하였고, 탄소성 구조해석을 통하여 이론식의 타당성을 입증하였다. 임펄스모타의 연소관을 이론식으로 설계하고 제작하여 유압시험과 지상연소시험을 실시하였다. 실험결과의 파열압력은 설계식과 구조해석 결과로 예측한 값과 유사한 값을 보였다. 본 논문의 설계이론을 통하여 설계단계에서 가볍고도 충분한 안전율을 갖는 고압용기를 간단히 설계할 수 있게 되었다.

• 한국추진공학회지
• /
• 제10권2호
• /
• pp.23-30
• /
• 2006

수십 msec의 단시간에 큰 추력을 발생시키는 임펄스모타의 무게를 가볍게 하기 위하여 금속재와 복합재를 조합하여 수만 psia의 초고압을 지탱하는 압력용기의 설계이론을 개발하였고, 탄소성 구조해석을 통하여 이론식의 타당성을 입증하였다. 임펄스모타의 연소관을 이론식으로 설계하고 제작하여 유압시험과 지상연소시험을 실시하였다. 실험결과의 파열압력은 설계식과 구조해석 결과로 예측한 값과 유사한 값을 보였다. 본 논문의 설계이론을 통하여 설계단계에서 가볍고도 충분한 안전율을 갖는 고압용기를 간단히 설계할 수 있게 되었다.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.67-73
• /
• 2019

An ultra-high pressure treatment device is a device used for increasing the shelf life of food by sterilizing it by applying hydrostatic pressure to solid or liquid food. The ultrahigh pressure treatment system developed in this study is a pressure vessel with a processing capacity of 100 L and a maximum pressure of 700 MPa. Pressure vessels for ultrahigh-pressure processing equipment are manufactured using wire-winding techniques. The design formula for making ultra-high pressure vessels with wire windings is given in ASME Section VIII - Division 3. In this study, the ratio of the cylinder to the winding area that can be applied in a wire-winding application was analyzed using a finite element analysis. Furthermore, the relationship between the variation of the residual stress in the vessel and the ratio of the winding area due to the variation of the winding tension was analyzed, and a design guide applicable to the actual product design was developed. Finally, the design equation was modified by presenting the coefficients to correct the difference between the finite element analysis and the design equation.

• Nuclear Engineering and Technology
• /
• 제32권4호
• /
• pp.379-394
• /
• 2000

As an in-vessel retention (IVR) design concept in coping with a severe accident in the nuclear power plant during which time a considerable amount of core material may melt, external cooling of the reactor vessel has been suggested to protect the lower head from overheating due to relocated material from the core. The efficiency of the ex-vessel management may be estimated by the thermal margin defined as the ratio of the critical heat flux (CHF）to the actual heat flux from the reactor vessel. Principal factors affecting the thermal margin calculation are the amount of heat to be transferred downward from the molten pool, variation of heat flux with the angular position, and the amount of removable heat by external cooling In this paper a thorough literature survey is made and relevant models and correlations are critically reviewed and applied in terms of their capabilities and uncertainties in estimating the thermal margin to potential failure of the vessel on account of the CHF Results of the thermal margin calculation are statistically treated and the associated uncertainties are quantitatively evaluated to shed light on the issues requiring further attention and study in the near term. Our results indicated a higher thermal margin at the bottom than at the top of the vessel accounting for the natural convection within the hemispherical molten debris pool in the lower plenum. The information obtained from this study will serve as the backbone in identifying the maximum heat removal capability and limitations of the IVR technology called the Cerium Attack Syndrome Immunization Structures (COASISO) being developed for next generation reactors.

• 한국항행학회논문지
• /
• 제15권3호
• /
• pp.456-461
• /
• 2011

본 논문에서 선박의 자재 선입/선출의 관리를 위한 RFID Shelf 시스템의 설계 및 구현을 제안하고자 한다. 제안하는 시스템은 기존의 RFID를 활용한 선박의 자재 선입/선출시 문제가 되는 비용 및 데이터 유효성의 문제 해결을 위해 Shelf당 하나의 RFID Reader에 단일 안테나의 사용으로 비용 문제를 해결하고, 선박과 같은 철 구조물에서의 Radio wave(RFID)사용 시 발생하는 데이터의 유효성을 검증한다. 또한 RFID Shelf 시스템에서 취합된 자재 선입/선출의 정보는 선박정보 시스템 설계하기 위한 목적을 가지고 있다. 제안된 RFID Shelf 시스템을 통해 선박내 자재를 체계적으로 관리하고 효율적인 업무 처리를 실현하는 효과를 기대할 수 있다.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.58-66
• /
• 2010

Topology design optimization is a method to determine the optimal distribution of material that yields the minimal compliance of structures, satisfying the constraint of allowable material volume. The method is easy to implement and widely used so that it becomes a powerful design tool in various disciplines. In this paper, a large-scale topology design optimization method is developed using the efficient adjoint sensitivity and optimality criteria methods. Parallel computing technique is required for the efficient topology optimization as well as the precise analysis of large-scale problems. Parallelized finite element analysis consists of the domain decomposition and the boundary communication. The preconditioned conjugate gradient method is employed for the analysis of decomposed sub-domains. The developed parallel computing method in topology optimization is utilized to determine the optimal structural layout of human powered vessel.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.21-29
• /
• 2003

This paper describes a research work on the development of computer-aided design system for deep drawing & ironing of a high pressure vessel. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, handbook, experimental results and empirical knowledge of field experts. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM software, DEFORM and ANSYS, to form a useful package. It is composed of five main modules, which are calculation of product thickness, input, production feasibility check, process planning, and autofrettage process modules and two submodules, which are folding check and process variable verification submodules. Programs for the system have been written in AutoLISP on the AutoCAD 2000 using personal computer. The developed system makes it possible to design and manufacture large high pressure vessel requiring D.D.I. process more efficiently.