DOI QR코드

DOI QR Code

Parallelized Topology Design Optimization of the Frame of Human Powered Vessel

인력선 프레임의 병렬화 위상 최적설계

  • Kim, Hyun-Suk (Department of Naval Architecture and Ocean Engineering and Research Institute of Marine Systems Engineering, Seoul National University) ;
  • Lee, Ki-Myung (Hyundai Heavy Industries Co., Ltd) ;
  • Kim, Min-Geun (Department of Naval Architecture and Ocean Engineering and Research Institute of Marine Systems Engineering, Seoul National University) ;
  • Cho, Seon-Ho (Department of Naval Architecture and Ocean Engineering and Research Institute of Marine Systems Engineering, Seoul National University)
  • 김현석 (서울대학교 공과대학 조선해양공학과) ;
  • 이기명 (현대중공업) ;
  • 김민근 (서울대학교 공과대학 조선해양공학과) ;
  • 조선호 (서울대학교 공과대학 조선해양공학과)
  • Published : 2010.02.20

Abstract

Topology design optimization is a method to determine the optimal distribution of material that yields the minimal compliance of structures, satisfying the constraint of allowable material volume. The method is easy to implement and widely used so that it becomes a powerful design tool in various disciplines. In this paper, a large-scale topology design optimization method is developed using the efficient adjoint sensitivity and optimality criteria methods. Parallel computing technique is required for the efficient topology optimization as well as the precise analysis of large-scale problems. Parallelized finite element analysis consists of the domain decomposition and the boundary communication. The preconditioned conjugate gradient method is employed for the analysis of decomposed sub-domains. The developed parallel computing method in topology optimization is utilized to determine the optimal structural layout of human powered vessel.

Keywords

References

  1. Lee, K.M. and Cho, S., 2005, "Topology Design Optimization of Structures using Solid Elements," Proceedings of COSEIK Symposium-Spring, 18, pp. 309-316.
  2. Lee, K.M. and Cho, S., 2006, "Parallel Topology Optimization on Distributed Memory System," Proceedings of COSEIK Symposium-Spring, 19, pp. 291-298.
  3. Bendsoe, M.P. and Sigmund, O., 2003, Topology Optimization: Theory, Methods and Applications, Springer-Verlag, Berlin.
  4. Ha, Y.D., Kim, W.J., Jung, H.S. and Cho, S., 2003, "Topology Design Optimization of Ship Structures," Proceedings of the Annual Autumn Meeting (SNAK), pp. 550-555.
  5. Kim, T.S., Kim, J.E. and Kim, Y.Y., 2004, “ Parallelized Structural Topology Optimization for Eigenvalue Problems,” International Journal of Solids and Structures. Vol. 41, pp. 2623-2641. https://doi.org/10.1016/j.ijsolstr.2003.11.027
  6. Shewchuk, J.R., 1994, An Introduction to the Conjugate Gradient Method without Agonizing Pain, Carnegie Mellon Univ.
  7. Tallec, P., 1994, “ Domain Decomposition Methods in Computational Mechanics,” Computational mechanics advances. Vol. 1, pp. 121-220.
  8. Rozvany, G.I.N. and Zhou, M., 1991, “ The COC Algorithm, Part I: Cross-section Optimization of Sizing,” Computer Methods in Applied Mechanics and Engineering, Vol. 89, pp. 281-308. https://doi.org/10.1016/0045-7825(91)90045-8
  9. Vemaganti, K. and Lawrence, W.E., 2005, “ Parallel Methods for Optimality Criteria-based Topology Optimization,” Computer Methods in Applied Mechanics and Engineering, Vol. 194, pp. 3637-3667. https://doi.org/10.1016/j.cma.2004.08.008
  10. Barrett, R., Berry, M., Chan, T.F., Demmel, J., Donato, J., Dongarra, J., Eijkhout, V., Pozo, R., Romine, C. and van der Vorst, H., 1994, Templates for the Solutions of Linear Systems: Building Blocks for Iterative Methods, 2nd ed., Philadelphia, PA.
  11. Papadrakakis, M., 1997, Parallel Solution methods in computational mechanics, John Wiley & Sons, Ltd.
  12. Aoyama,Y. and Nakano, J., 1999, RS/6000 SP: Practical MPI Programming, IBM.
  13. Pacheco, P.S., 1997, Parallel Programming with MPI, Morgan Kaufmann Publisher, San Francisco, CA.