• Tunnel and Underground Space
• /
• v.20 no.2
• /
• pp.82-91
• /
• 2010

Grouting technology is one of the ground improvement methods used in water controlling and reinforcement of rock mass in underground structure construction. It is necessarily required to find out the characteristics of grout flow through discontinuities in a rock mass for an adequate grout design and performance assessment. Laminar flow is not always applicable in simulating a grout flow in a rock mass, since the rock joints usually have apertures at a micro-scale and the flow through these joints is affected by the joint roughness and the velocity profile of the flow changes partially near the roughness. Thus, the influence of joint roughness and aperture on the grout flow in rough rock joint was numerically investigated in this study. The commercial computational fluid dynamics code, FLUENT, was applied for this purpose. The computed results by embedded Herschel-Bulkley model and VOF (volume of fluid) model, which are applicable to simulate grout flow in a narrow rock joint that is filled with air and water, were well compared with that of analytical results and previously published laboratory test for the verification. The injection pressure required to keep constant injection rate of grout was calculated in a variety of Joint Roughness Coefficient (JRC) and aperture conditions, and the effect of joint roughness and aperture on grout flow were quantified.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.123-131
• /
• 2016

Process mining in big data environment utilize a number of data were generated from the business process. It generates lots of knowledge and insights regarding implementation and improvement of the process through the event log of the company's enterprise resource planning (ERP) system. In recent years, various research activities engaged with the audit work of company organizations are trying actively by using the maximum strength of the mining process. However, domestic studies on applicable sales auditing system for the process mining are insufficient under big data environment. Therefore, we propose process-mining methods that can be optimally applied to online and traditional auditing system. In advance, we propose continuous monitoring information system that can early detect and prevent the risk under the big data environment by monitoring risk factors in the organizations of enterprise. The scope of the research of this paper is to design a pre-verification system for risk factor via practical examples in sales auditing. Furthermore, realizations of preventive audit, continuous monitoring for high risk, reduction of fraud, and timely action for violation of rules are enhanced by proposed sales auditing system. According to the simulation results, avoidance of financial risks, reduction of audit period, and improvement of audit quality are represented.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.93-103
• /
• 2015

Purpose - This study plans to adopt a more sophisticated approach toward service recognition by customers in general supermarkets in order to revise the service quality measurement methods that suit the context of Korean distribution channels. In particular, in general supermarkets, where much of the shopping process is in the form of self-service, there is high reliance on the service recognized by the consumers; therefore, it is highly likely that consumers would make their purchasing decisions based on their recognition of service quality or guarantees. It also utilized service quality elements of a basic level in the KD-SQS development model in order to indicate that the quality recognized by consumers impacts their loyalty to the stores with financial value and abstract value. Research design, data, and methodology - The study suggested a theoretical model comprising 13 hypotheses on relations between theoretic variables, and conducted surveys with consumers using discount stores in Seoul and Gyunggi Metropolitan area in order to verify the hypotheses, while using SPSS 20.0, AMOS 21.0 as the verification program. The survey sheets used amounted to 332, and a structural equation model was used to analyze the reliability and validity of constituent elements and to verify the suggested hypothesis. Therefore, this study analyzes the interrelations between service quality and guarantee factors in the distribution channel and their relations with the loyalty to stores as a dependent variable. Results - First, the results of the hypotheses tests helped identify the relations between service quality, service guarantees, service value, and customer loyalty, providing an opportunity to define the relations between constituent elements. In particular, service convenience in service quality has no impact on financial values. Further, stores' service policy had no impact on abstract values. Service recognition by service convenience has an impact on abstract values such as good image, comfort, and usability, while mileage systems promote financial values for consumers. In order to improve consumer values in service quality and values, general supermarkets should improve their service convenience, membership, and mileage programs using various strategies. Conclusion - In order to improve consumer values in service quality and values, general supermarkets should improve their service convenience, membership, and mileage programs using various strategies. Further, as service guarantee systems have a significant and direct impact on customer loyalty, rather than customer value recognition, service guarantees should be used to encourage customers to re-visit the stores. Finally, this study applied the findings of preceding studies in terms of service quality measurement; it had limitations in referencing preceding studies in a comprehensive manner. It also had limits in expanding upon various preceding studies because it was difficult to apply new measurement tools due to the lack of service quality measurement tools for general supermarkets. Therefore, it is necessary to conduct more studies on service quality to measure service quality and develop measurement tools by incorporating various industry characteristics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.66-76
• /
• 2009

The motion estimation in video encoding system occupies the biggest part. So, we require the motion estimator with efficient structure for real-time operation. And for motion estimator's implementation, it is desired to design hardware module of an exclusive use that perform the encoding process at high speed. This paper proposes motion estimation detection block(MED), 41 SADs(Sum of Absolute Difference) calculation block, minimum SAD calculation and motion vector generation block based on parallel processing. The parallel processing can reduce effectively the amount of the operation. The minimum SAD calculation and MED block uses the pre-computation technique for reducing switching activity of the input signal. It results in high-speed operation. The MED and 41 SADs calculation blocks are composed of adder tree which causes the problem of critical path. So, the structure of adder tree has changed the most commonly used ripple carry adder(RCA) with carry skip adder(CSA). It enables adder tree to operate at high speed. In addition, as we enabled to easily control key variables such as control signal of search range from the outside, the efficiency of hardware structure increased. Simulation and FPGA verification results show that the delay of MED block generating the critical path at the motion estimator is reduced about 19.89% than the conventional strukcture.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.849-858
• /
• 2019

Recent developments in computer graphics technology and image processing technology have increased interest in point cloud technology for inputting real space and object information as three-dimensional data. In particular, point cloud technology can accurately provide spatial information, and has attracted a great deal of interest in the field of autonomous vehicles and AR (Augmented Reality)/VR (Virtual Reality). However, in order to provide users with 3D point cloud contents that require more data than conventional 2D images, various technology developments are required. In order to solve these problems, an international standardization organization, MPEG(Moving Picture Experts Group), is in the process of discussing efficient compression and transmission schemes. In this paper, we provide a region division transfer method of 3D point cloud content through extension of existing MPEG-DASH (Dynamic Adaptive Streaming over HTTP)-SRD (Spatial Relationship Description) technology, quality parameters are further defined in the signaling message so that the quality parameters can be selectively determined according to the user's request. We also design a verification platform for ROUTE (Real Time Object Delivery Over Unidirectional Transport)/DASH based heterogeneous network environment and use the results to validate the proposed technology.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.81-88
• /
• 2021

In general, a non-explosive nylon wire cutting-based holding and release mechanism has been used to store and deploy deployable solar panels of CubeSat. However, with this method, accessing the solar panel's access port for charging the cube satellite's battery and electrical inspection and testing of the PCB and payloads while the solar panel is in storage is difficult. Additionally, the mechanism must have a reliable release function in an in-orbit environment, and reusability for stow and deploy of the solar panel, which is a hassle for the operator and difficult to maintain a consistent nylon wire fastening process. In this study, we proposed a pin-puller-based solar panel holding and release mechanism that can easily deploy a solar panel without cutting nylon wires by separating constraining pins. The proposed mechanism's release function and performance were verified through a solar panel deployment test and a maximum separation load measurement test. Through this, we also verified the design feasibility and effectiveness of the pin-puller-based separation device.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.168-173
• /
• 2021

In this study, we measured total flavonoids after extracting the total flavonoids from lemongrass which is known to have a high content of antioxidant ingredients when using microwave energy. Also, optimal extraction conditions of active ingredients using central composite design-response surface methodology (CCD-RSM) were presented. Both ultrapure water and alcohol were used as extraction solvents and the volume ratio of ethanol/ultrapure water, microwave irradiation time, and microwave irradiation power were set as independence variables. And the extraction yield and total flavonoids were measured. The optimal extraction conditions using CCD-RSM were the volume ratio of ethanol/ultrapure water = 56.3 vol.%, the microwave irradiation time = 6.1 min, and the microwave irradiation power = 574.6 W. We could also obtain expected results of yield = 17.2 wt.% and total flavonoids = 44.7 ㎍ QE/mL dw under the optimum conditions. The comprehensive satisfaction degree of this formula was 0.8562. The P-value was calculated for the yield of 0.037 and the total flavonoids content of 0.002. The average error from actual experiments established for the verification of conclusions was lower than 2.5%. Therefore, a high favorable level could be obtained when the CCD-RSM was applied to the optimization of extraction process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1049-1055
• /
• 2018

This paper proposes the Signal Quality Indicator (SQI) to certify the wired communication channels connected between sub-systems embedded in guided flight systems. The communication signals can be distorted due to the poor interconnections of wired channels, the interference from the signals passing through the adjacent routed channels, and additive white Gaussian noises. As the ways to find out the condition of the communication channels, we present the Hamming distance based SQI (H-SQI) and the Euclidean distance based SQI (E-SQI). Two SQIs are compared in terms of the SQI resolution performance and the required number of hardware resources for implementations. The E-SQI requires the 10 times FPGA resources and an additional analog-digital converter over the H-SQI in spite of its outstanding SQI resolution performance. Moreover, the H-SQI could have the enough SQI resolution performance to find out the channel condition by increasing the oversampling rate, so the H-SQI is the more adequate than the E-SQI for the SQI of the guided flight systems.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.413-425
• /
• 2019

We see many images every day, some of these images are stored in memory, and the majority are immersed in the unconscious world. Visual elements are seen by personal attention or by visual or biological attention factors. Specific and clear discovery of this visual attention has not yet been made. However, there is an interesting discussion of this visual attention in the fields of interior, design, visual perception, advertising, and psychology. Advertising photographers are expected to produce what their work will have on viewers and consumers. However, the adjustment of subject, exposure, color, or post-production, which could have a visual effect on the consumer, was determined only by the photographer's senses rather than the experimental verification. The advertisement photographs provide a specific image related to the object to be advertised and deliver a certain message. Therefore, it is necessary to understand the effect of the image in a certain visual way. According to previous studies, there are two major factors that affect the visual impression of the viewer. One is the factor depending on the type and content of the subject and the other is the factor about the density and color of the subject. The purpose of this study is to investigate the meaningful changes in the visual perception depending on the shape, content, color and tone of the subject, which can be called the main subject, And to analyze the effects of I will study some implications of visual elements through various analyzes.

• Journal of vocational education research
• /
• v.37 no.5
• /
• pp.101-121
• /
• 2018

The purpose of this study is to clarify the relationship between coaching and self-esteem, career decision-making self-efficacy, and career preparation behavior through field experiments. To accomplish the purpose of the study, as the purposeful sampling was selected 50 male university students in Chungnam, South Korea. This experimental design, 25 university students were assigned to an experimental group, and another 25 university students were assigned to a control group. The experimental group had four sessions of coaching program. The control group did not have any coaching sessions. After four coaching sessions, questionnaires were administrated again. To conduct ANCOVA, pre-measurement scores for each dependent variable were included as covariates and post-measurement scores were included as dependent variables. The result proved the effect of coaching on self-esteem, career decision-making self-efficacy, and career preparation behavior. As the results of analysis, for control group, there was no difference between before and after measurement for each dependent variable. However, there was statistically significant difference between before and after measurement for each dependent variable in experimental group. This result confirmed that coaching caused increase in the level of self-esteem, career decision-making self-efficacy, and career preparation behavior. The result like this has a significance to be able to be used as a basic data that used efficiently in the field of career guidance and HRD for university student.