• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.368-372
• /
• 2016

Background: Methodologies for a series of radiological consequence assessments show a distinctive difference according to the design principles of the original nuclear suppliers and their technical standards to be imposed. This is due to the uncertainties of the accidental source term, radionuclide behavior in the environment, and subsequent radiological dose. Both types of PWR and PHWR are operated in Korea. However, technical standards for evaluating atmospheric dispersion have been enacted based on the U.S. NRC's positions regardless of the reactor types. For this reason, it might cause a controversy between the licensor and licensee of a nuclear power plant. Materials and Methods: It was modelled under the framework of the NRC Regulatory Guide 1.145 for light-water reactors, reflecting the features of heavy-water reactors as specified in the Canadian National Standard and the modelling features in MACCS2, such as atmospheric diffusion coefficient, ground deposition, surface roughness, radioactive plume depletion, and exposure from ground deposition. Results and Discussion: An integrated accident consequence assessment code, ACCESS (Accident Consequence Assessment Code for Evaluating Site Suitability), was developed by taking into account the unique regulatory positions for reactor types under the framework of the current Korean technical standards. Field tracer experiments and hand calculations have been carried out for validation and verification of the models. Conclusion: The modelling approaches of ACCESS and its features are introduced, and its applicative results for a hypothetical accidental scenario are comprehensively discussed. In an applicative study, the predicted results by the light-water reactor assessment model were higher than those by other models in terms of total doses.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.429-437
• /
• 1999

A mathematical model was established for estimating changes in pressure and volume of permeable kimchi packages. The model comprises the CO2 gas production from kimchi and permeation of O2, CO2 and N2 through the permeable film or sheet. Using the developed model, the effects of various packaging variables on the pressure and volume changes were analyzed for rigid and flexible packag es of kimchi(3% salt content) at 15oC, and then effect of storage temperature was also looked into. In case of rigid pack of 400g, using the plastic sheet of high CO2 permeability and initial vacuumizing can help to relieve the problem of pressure build up. The lower fill weight can further reduce the pressure, but will result in higher packaging cost. For the flexible package of 3 kg, highly permeable films such as low density polyethylene(LDPE) and polypropylene can reduce the volume expansion. Higher ratio of CO2 permeability to O2 and N2 permeabilities are effective in reducing the volume expansion. Increased surface area cannot contribute to reduction of volume expansion for highly permeable flexible packages of kimchi. For the impermeable packages, pressure and volume at over ripening stage (acidity 1.0%) increase with decreased temperature, while those at optimum ripening stage(acidity 0.6%) change little with temperature. Pressure of permeable rigid LDPE package increases with tem perature at any ripening stage, and temperature affects the volume of flexible LDPE package very slightly. Experimental verification of the present results and package design with economical consid eration are needed as a next step for practical application.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.50.1-50.1
• /
• 2014

The Multi-purpose InfraRed Imaging System (MIRIS) is the main payload of Science and Technology Satellite 3 (STSAT-3), which was launched onboard Dnepr rocket from Russian Yasny Launch Base in November 2013. The MIRIS is an infrared (IR) camera, and the telescope has to be cooled down to below 200K in order to reduce thermal background noise. For the effective cooling and low-power consumption, we applied passive cooling method to the thermal design of the MIRIS. We also conducted thermal analysis and tested for the passive cooling before the launch of STSAT-3. After the launch, we have received State-of-Health (SOH) data from the satellite on orbit, including temperature monitoring results. It is important that the temperature of the telescope was shown to be cooled down to below 200K. In this paper, we present both the temperature data of the MIRIS on orbit and the thermal analysis results in the laboratory. We also compare these results and discuss the verification of the passive cooling.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.154-160
• /
• 2020

This paper presents a grid current control algorithm for a grid connected inverter (GCI) system in a stationary reference frame. When a Proportional Integral (PI) controller at a stationary reference frame is used in a GCI system, steady state error and phase lags are presented because AC signals are controlled at a stationary reference frame. In this paper, a feedforward controller is applied to the PI controller to compensate the steady state error and phase lags by improving command tracking performance. In addition, disturbance rejection control is applied to the PI controller to protect the GCI system by eliminating disturbance, grid voltage in a GCI system, when a grid fault such as line-to-line fault, happens. The proposed GCI current control algorithm is analyzed in a frequency domain and a simulation model of the proposed GCI current control system is developed for verification of the performance.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.97-108
• /
• 2016

Lunar rover plays an important role in lunar exploration. Especially, performance of rover wheel related to interaction with lunar soil is of great importance when it comes to optimization of rover's configuration. In this study, in order to investigate the motion performance of lunar rover's wheel on Korean Lunar Soil Simulant (KLS-1), a single wheel testbed was developed and used to carry out a series of experiments with two kinds of wheel with grousers and without grousers which were used to perform the experiments. Wheel traction performance was evaluated by using traction parameters such as drawbar pull, torque and sinkage correlated with slip ratio. The results showed that the single wheel testbed was suitable for evaluation of the performance of wheel and rover wheel with grousers which was likely to have higher traction performance than that without grousers in Korean Lunar soil simulant. The experimental results could be utilized in verification of the optimum wheel design and effectiveness of wheel traction for Korean lunar rover.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.6
• /
• pp.5-16
• /
• 2017

Rocking behavior of shallow foundation during the earthquake can reduce the seismic load of the superstructure. The dynamic centrifuge tests were performed to investigate the availability of using rocking behavior for the weathered soil condition. The centrifuge test model was composed of the weathered soil, shallow foundation and single degree of freedom structure. And the accelerations of soil, foundation and structure, and the foundation settlement were measured during the earthquake. From the test result, the seismic load of the structure for the strong earthquake input was reduced by the rocking behavior with foundation uplift and the maximum foundation settlement was less than 0.5% of the foundation width. This shows the potential that the rocking foundation concept can be used in the economical seismic design of foundation for the weathered soil in the future with additional research and verification.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.94-104
• /
• 2004

This study creates the LCP (Landscape Control Point) through the survey of spot sites for the quality of landscape assessment, which is based on an objective and departmentalized data base; the landscape assessment was achieved by production of weight value with the AHP (Analytic Hierarchy Process) technique, selection of requisites for the landscape assessment with the IVERSON method and visual area analysis with GIS (Geographic Information System). Futhermore, validity of the landscape assessment was verified by analysis of the correlation between physical amount and aesthetic amount. The purpose of this study is to suggest the basic essential data for landscape assessment and landscape planning by the characteristics of landscape based on verification of the suggested landscape assessment methods. The results of this study are summarized below. 1. In the adaptation of landscape assessment using GIS, the landscape assessment points of LCP 18, 17 and 16, which have more visible elements such as hill area, mountain area, and forest and farm land, were indicated to be higher than the others. In contrast, the landscape assessment points of LCP 13, 6 and 10, which have less visible elements, were relatively lower than the others. 2. In the visible preference measuring method, LCP 4, 14, and 16 showed high points of landscape assessment with 3.46, 3.4, and 3.18 each. With the more natural environments such as hill area, mountain area, and forest and farm land, higher results were shown. In contrast, LCP 7, 1, and 9 showed low points of landscape assessment with 2.24, 2.36, and 2.53 each. 3. In this study, a coefficient of 0.746 was gained by the analysis of correlation between the points of landscape assessment method and the points of visual preference from a slide show. This has 99 percent of probability in statistical data. 4. In conclusion, with the demonstration of the correlation between the landscape assessment method based on the AHP technique and the aesthetic amount (preference proportion), the practical use of landscape assessment can be demonstrated by the suggested landscape assessment method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2775-2782
• /
• 2010

In this paper, we propose a web-based programming class support system to help a lecturer to teach a programming language to students effectively. The proposed system is composed of a error analysis step and a verification step. The error analysis step checks whether there are compile time errors or run time errors in each student's submitted program. Given some errors, the system provides helpful feedback for the student to fix the errors. On the contrary, the system provides quick feedback after checking the source code style, comments, and plagiarism in the submitted program. As soon as the student submits the program, the student can see the check results. According to the result of utilizing the proposed system in a C programming language class, students tend to submit program assignments actively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.791-793
• /
• 2015

Recently, UCC (User Created Contents) and VoD (Video on Demand), and multimedia content are growing, IP-TV, Smart TV, OHTV (Open Hybrid TV) various services such as multi platform (Multi-platform) environment, services and QoS issues. To solve this problem, the network efficiently, and improve the quality of content is necessary for the system. In this paper, the network of channels State and transmission of multimedia data based on dynamic resource usage, TCP and UDP, Adaptive dual-streaming system used for design and analysis. In addition, the existing TCP and UDP streaming system using a single protocol for analysis and verification of the effectiveness of the difference between and. This is a disaster, and medical/first aid system will be utilized in the field of feed, are ubiquitous.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.491-498
• /
• 2016

Stress on plates may increase in the neighborhood the edges or the holes for rivets or bolts. Excessive stress concentration may lead to severe breakage of the plates. Thus, it is important to conduct optimization of arrangement of holes at the design stage. In this paper, accuracy of FEM analysis was examined for such stress concentration. By changing the hole size on a narrow plate, change of the stress concentration factor(K) was investigated. Additionally, the same experiment was conducted about series of multiple holes on plate to investigate interaction between the adjacent holes. Then, the FEM results were compared to the reference predictions respectively. Finally, a method by which simple stress concentrating situations can be optimized, will be suggested. This method was examined by FEM, and showed similar tendency with the expectation. Therefore, this method can be valuable when arranging the holes on a plate.