• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.57-65
• /
• 2019

This study is a scientific approach to psychological factors such as emotional stability among various effects of forest resources. In order to carry out this study, the experiment was conducted on the subjects by setting the forest healing space as various spaces. The subjects who participated in this experiment were the students in their twenties and the average age was 22±1.25 years. The subjects were assessed for emotional words through subjective sequence evaluation in different designated forest healing spot. In addition, the emotional states that they actually perceived were measured by measuring the bio-signals to their perceived emotions. BMP, SDNN, VLF, LF, HF, Amplitude, and PPI were used for the bio-signal reaction experiment applied to this study. The results of this experiment were measured by Friedman test and Wilcoxon test for statistical analysis. n this study, 'good', 'clear', and 'uncomfortable' words were found statistically significant at the spot of forest healing space for subjective emotional vocabulary. In addition, SDNN, HF and Amplitude were statistically significant in the results of quantitative bio-signal measurement at each spot in the forest healing space. Based on the results of this study, we can suggest the application direction and strategic utilization plan of forest healing spot and forest resource utilization field. This is not only a guide for the users who use the facility through the spatial facilities and physical requirements for the emotion based forest-healing, but also can be used as a personalized emotional space design aspect.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.12
• /
• pp.93-102
• /
• 2023

Despite recent modifications to building structural standards emphasizing the seismic stability of building foundations, the current design focus remains solely on vertical support, resulting in insufficient consideration of horizontal loads during earthquakes. In this study, we evaluated the dynamic behavior of inclined tripod micropiles (ITMP), which provide additional seismic resistance against horizontal and vertical loads during earthquakes. A comparison of the dynamic characteristics, such as acceleration, displacement, bending moment, and axial force, of ITMP with a 15° installation angle and normal vertical micropiles with a 0° installation angle was performed using dynamic centrifuge model tests. Results show that under moderate seismic loads, the proposed ITMP exhibited lower acceleration responses than the vertical micropiles. However, when subjected to a long-period strong seismic excitation, such as sine (2 Hz), ITMP showed greater responses than the vertical micropiles in terms of acceleration and settlement. These results indicate that the use of ITMP reduces the amplif ication of short-period (high-f requency) contents compared with the use of vertical micropiles. Therefore, ITMP can be used to enhance seismic performance of structures.

• Journal of The Korean Association For Science Education
• /
• v.27 no.4
• /
• pp.346-353
• /
• 2007

In order to be efficient in teaching, a teacher should understand the current learner's level through diagnostic evaluation. This study has examined the major issues arising from the noble diagnostic assessment tool based on the theory of knowledge space. The knowledge state analysis method is actualizing the theory of knowledge space for practical use. The knowledge state analysis method is very advantageous when a certain group or individual student's knowledge structure is analyzed especially for strong hierarchical subjects such as mathematics, physics, chemistry, etc. Students' knowledge state helps design an efficient teaching plan by referring their hierarchical knowledge structure. The knowledge state analysis method can be enhanced by computer due to fast data processing. In addition, each student's knowledge can be improved effectively through individualistic feedback depending on individualized knowledge structure. In this study, we have developed a diagnostic assessment test for measuring student's learning outcome which is unattainable from the conventional examination. The diagnostic assessment test was administered to middle school students and analyzed by the knowledge state analysis method. The analyzed results show that students' knowledge structure after learning found to be more structured and well-defined than the knowledge structure before the learning.

• Therapeutic Science for Rehabilitation
• /
• v.13 no.2
• /
• pp.85-94
• /
• 2024

Objective : This study aimed to determine the impact of an instrumental daily living activity program for adults with developmental disabilities on their daily living activities and quality of life (QOL). Methods : This study used a single-group pre-test-post-test experimental design. Participants comprised 17 adults with developmental disabilities from the Welfare Center for the Disabled. This program consisted of 10 sessions, including pre- and post-assessments, pertaining to training and education on grocery shopping, meal preparation and cleaning, home management, safety, and emergency management. The evaluation tools used in this study were the Quality of Life Questionnaire, Korean version of the Life Space Assessment (K-LSA), and Korean version of the Instrumental Activities of Daily Living (K-IADL). Results : There was a statistically significant difference in the QOL and K-IADL scores before and after the instrumental activities of daily living occupational therapy program, and there was no statistically significant difference in the K-LSA scores. Conclusion : This study confirmed that implementing an IADL program for adults with developmental disabilities had a positive impact on performance and QOL. For adults with developmental disabilities to participate in daily life and society, interventions for work participation, including training in activities of daily living, must be expanded.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.2 s.54
• /
• pp.165-171
• /
• 2009

This research developed two semi-active MR dampers whose gaps in the orifice area were different from each other, and evaluated their damping performance by loading tests. The Damping performance of MR dampers characteristically depends on various factors like their material and mechanical ones, but most importantly on the size of gap in the orifice area. For this research, we designed the orifice gaps of two dampers as each 1.0mm and 2.0mm, both with the 80mm outer diameter of the orifice. We also designed two loading test sets with different input currents, and acquired different control ability from them. The acquired test results were analyzed and evaluated with their maximum and minimum damping force and also their dynamic range from the force-displacement hysteresis loops and the force-input current relationship curve. This research clearly proved how the damping performance of control devices depends on the gap effect, and also presented a possibility that the two dampers developed in this research could be used for the smart control of construction structures by effectively adapting the input current and the number of coil turns.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.226-233
• /
• 2016

Purpose: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different measurement methods in assessing fit of the ceramic crowns: micro CT and cross-section technique. Materials and methods: A prepared typodont mandibular molar for ceramic crown was duplicated and ten dies were produced by milling the PMMA (polymethylmethacrylate) resin. Ten vinyl polysiloxane impressions were made and stone casts were produced. Five dies were used for IPS e.max Press crowns with heat-press technique. The other five dies were used for IPS e.max CAD crowns with CAD-CAM technique. Ten lithium disilicate crowns were cemented on the resin dies using zinc phosphate cement with finger pressure. The marginal and internal fits in central buccolingual plane were evaluated using a micro CT. Then the specimens were embedded and cross-sectioned and the marginal and internal fits were measured using scanning electronic microscope. The two measurement methods and two manufacturing methods were compared using Mann-Whitney U test (SPSS 22.0). Results: The marginal and internal fit values using micro CT and cross-section technique were similar, showing no significant differences. There were no significant differences in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique. Conclusion: Both micro CT and cross-section technique were acceptable methods in the evaluation of marginal and internal fit of lithium disilicate crown. There was no difference in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique except occlusal fit.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.93-100
• /
• 2015

Modern wooden structures usually are connected with steel fastener type connectors. And joints using multiple connectors in wooden structures will form semi-rigid connection. If connection in wooden structure would be designed to be pinned joint, the underestimate for loads transmitted through connection, would result in the deficient capacity of resistance in connection. And if joints in wooden structures would be assumed to be fully-rigid joint, amount of fasteners needed at the connection could be excessively increased. It will give a bad effect in the view of beauty, constructability and economy. Estimate for the reasonable stiffness of connection might be essential in design of reasonable connection in wooden structure. This paper will suggest analysis modelling technique that can represent approximate stiffness of connections using a common analysis program for double shear connection in order to give help in performing easily the design of wooden structure. It is verified that the suggested approximate analysis modelling technique could represent the behavior in connection by comparing the analysis results with test results for tensile, bending moment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.781-788
• /
• 2013

Predicting the engine component temperature is a basic step to conduct structural safety evaluation in medium-speed diesel engine design. Recent trends such as increasing power density and performance necessitate more effective thermal management of the engine for achieving the desired durability and reliability. In addition, the local temperatures of several engine components must be maintained in the proper range to avoid problems such as low- or high-temperature corrosion. Therefore, it is very important to predict the temperature distribution of each engine part accurately in the design stage. In this study, the temperature of an engine component is calculated by using steady-state conjugate heat transfer analysis. A proper approach to determine the thermal load distribution on the thermal boundary area is suggested by using 1D engine system analysis, 3D transient CFD results, and previous experimental data from another developed engine model. A Hyundai HiMSEN engine having 250-mm bore size was chosen to validate the analysis procedure. The predicted results showed a reasonable agreement with experimental results.

• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.536-541
• /
• 2015

The purpose of this study was to evaluate the marginal and internal gap of Cobalt (Co)-Chromium (Cr) sintering metal coping fabricated by dental computer-aided design/computer-aided manufacturing systems. Abutment tooth 46 of universal numbering system was selected for the study. Twenty Co-Cr metal copings of two groups were manufactured and scanned. Co-Cr cast metal copings (CCM) group of ten were fabricated using investment, burnout and casing after subtractive manufacturing of wax block. Also, Co-Cr sintering metal copings (CSM) group of ten were fabricated using sintering processing after subtractive manufacturing of Co-Cr soft metal bock. Marginal and internal gap of Co-Cr metal copings of twenty were measured by digital microscope (${\times}160$) with silicone replica technique. The data was analyzed from IBM SPSS Statistics ver. 22.0 Statistical software for Mann-Whitney U test (${\alpha}=0.05$). $Mean{\pm}standard$ deviation of marginal gap of CCM group was $90.12{\pm}61.73{\mu}m$ of CSM group was $60.17{\pm}24.83{\mu}m$. However, two groups was statistically not different (p>0.05). This study showed that CSM group was clinically acceptable adaptation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.71-78
• /
• 2012

Recycled aggregates are made from construction wastes, and they have many national and social benefits by saving energy, developing substitute resources, and protecting environment. However, low-quality recycled aggregate with low density and high absorption rate cannot be used for structural concrete aggregate but is used mainly for low added value. Therefore, this study aims to identify the characteristics of the materials of recycled aggregates made after crashing and pulverizing waste concrete. For this, their major physical characteristics of cement content, absolute dry density, absorption rate, etc. were reviewed to make a mix design (draft) for the production of the secondary product and performance evaluation was done on the bending strength, absorption rate, bending strength after freezing and thawing, compressive strength, air-dried gravity, etc. of the test products produced by applying the mix design to compare the results with the quality standards of GR mark. The results of the tests showed that the substitution rate of recycled aggregate increased to 50~90 %, which is of superior quality than the performance standards of GR F 4007. Therefore, it is thought that they can be used for various construction works with certain physical characteristics applicable to the production of secondary concrete products using recycled aggregates.