• The Journal of Advanced Prosthodontics
• /
• v.10 no.5
• /
• pp.347-353
• /
• 2018

PURPOSE. The purpose of this study was to evaluate the marginal discrepancy of heat-pressed ceramic veneers manufactured using a CAD/CAM system. MATERIALS AND METHODS. The ceramic veneers for the abutment of a maxillary left central incisor were designed using a CAD/CAM software program. Ten veneers using a microstereolithography apparatus (AM group), ten veneers using a five-axis milling machine (SM group), and ten veneers using a traditional free-hand wax technique (TW group) were prepared according to the respective manufacturing method. The ceramic veneers were also fabricated using a heat-press technique, and a silicone replica was used to measure their marginal discrepancy. The marginal discrepancies were measured using a digital microscope (${\times}160$ magnification). The data were analyzed using a nonparametric Kruskal-Wallis H test. Finally, post-hoc comparisons were conducted using Bonferroni-corrected Mann-Whitney U tests (${\alpha}=.05$). RESULTS. The $mean{\pm}SD$ of the total marginal discrepancy was $99.68{\pm}28.01{\mu}m$ for the AM group, $76.60{\pm}28.76{\mu}m$ for the SM group, and $83.08{\pm}39.74{\mu}m$ for the TW group. There were significant differences in the total marginal discrepancies of the ceramic veneers (P<.05). CONCLUSION. The SM group showed a better fit than the AM and TW groups. However, all values were within the clinical tolerance. Therefore, CAD/CAM manufacturing methods can replace the traditional free-hand wax technique.

• IE interfaces
• /
• v.18 no.3
• /
• pp.288-296
• /
• 2005

Many jobs and activities in our daily lives require squatting postures. The fore part includes housekeepers, farmers, and welders and the latter includes a wide variety of activities such as housekeeping; planting, cultivating and harvesting various agricultural products; grinding, welding, etc. It is speculated that prolonged squatting postures without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is conducted to examine the proper height of stools according to the position of the working materials and to develop wearable stools for workers with squatting posture. Forty male and female subjects participated in the experiment to find the proper height of stools according to the position of the working materials. Subjects were asked to squat and work with 3 different working positions: floor level; ankle level; shank level of 3 different stool height conditions: 10cm height; 15cm height; and 20cm height. After 5 minutes of maintaining a squatting work posture while sitting on the different height stools, Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided stools under the conditions of different working positions. The results of statistical analysis show that the subjects preferred 10cm height stool for floor level, 15cm height stool for ankle level, 20cm height stool for knee level. We thus strongly recommend to use appropriate height stools in accordance with the different working positions. Moreover, a prototype wearable stool was designed such that workers with squatting posture do not need to move the stool while they are moving about. The purpose of developing wearable stool was to decrease the physical stress and hence promote worker's health who work with squatting posture.

• Composites Research
• /
• v.15 no.1
• /
• pp.53-60
• /
• 2002

Composite ablative tubes required capabilities of ablative and structural characteristics were fabricated through filament winding technique and several experiments were conducted to evaluate the structural performance of composite ablative tubes. For this purpose, manufacturing procedures were briefly described and then resin digestion method was applied to measure the fiber volume fraction and the void content of composite ablative tubes. The configuration of tensile specimen fur composite ablative tubes with not losing the continuity of reinforced fibers was suggested by evaluating mechanical properties of several types of the specimen with different widths. Also, suitable processing variables for composite ablative tubes were determined by evaluating mechanical properties of several types of the specimen with different processing variables. In addition, acoustic emission signals were obtained during the proof test and could be applicable to study the crack initiation and the damage mode of composite ablative tubes. Finally, the structural reliability of composite ablative tubes could be verified to satisfy design requirements through the proof and burst tests.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.194-200
• /
• 2009

The extruder type is classified as screw type and non-screw type in terms of the extrusion method. The screw type extruder, which is the most frequently used, is classified as the single screw extruder and the multi-screw extruder. They are classified as vertical type and horizontal type in terms of structure; and those for compounding and for forming in terms of function. The single screw extruder is a universal extruder, most of which is suitable for the extrusion forming of thermoplastic resin. The multi-screw(two-screw, three-screw and four-screw) extruder can increase the extrusion power using the engagement of the screw flank. The single screw extruder does not have a good mixing ratio of the raw material and stable extrusion power, while it has low construction cost and operation cost. In this study, the single screw extruder, which has many weak points compared with the multi-screw extruder, was studied. There have been many studies on the single screw extruder, and they led to its significant development. The existing study method, however, had complex analysis processes and required much time. In this study, the CFD was applied to the performance test and analysis of the extruder, and the optimal design condition of the extrusion power for the screw and die of the single screw extruder was found by comparing the analysis results with the actual performance measurement of the single screw extruder.

• Structural Engineering and Mechanics
• /
• v.64 no.4
• /
• pp.449-459
• /
• 2017

High-rise buildings are generally sensitive to strong winds. The evaluation of wind loads for the structural design, structural health monitoring (SHM), and vibration control of high-rise buildings is of primary importance. Nevertheless, it is difficult or even infeasible to measure the wind loads on an existing building directly. In this regard, a new inverse method for evaluating wind loads on high-rise buildings is developed in this study based on a discrete-time Kalman filter. The unknown structural responses are identified in conjunction with the wind loads on the basis of limited structural response measurements. The algorithm is applicable for estimating wind loads using different types of wind-induced response. The performance of the method is comprehensively investigated based on wind tunnel testing results of two high-rise buildings with typical external shapes. The stability of the proposed algorithm is evaluated. Furthermore, the effects of crucial factors such as cross-section shapes of building, the wind-induced response type, errors of structural modal parameters, covariance matrix of noise, noise levels in the response measurements and number of vibration modes on the identification accuracy are examined through a detailed parametric study. The research outputs of the proposed study will provide valuable information to enhance our understanding of the effects of wind on high-rise buildings and improve codes of practice.

• Computers and Concrete
• /
• v.22 no.5
• /
• pp.481-492
• /
• 2018

In this paper, a new hybrid fiber system (NHFS) is investigated for the application of slab. The steel fiber, polyvinyl alcohol (PVA) fiber and calcium carbonate ($CaCO_3$) whisker is added to form NHFS. The four-point bending test is carried out on the flexural properties of slab with plain, steel fiber, traditional hybrid fiber system (THFS) and NHFS reinforced cementitious composites. The flexural behavior is evaluated by ASTM C1018-97, JCI-SF4 and post-crack strength (PCS) technique. The evaluation parameters of flexural toughness such as toughness index (TI), equivalent flexural strength (EFS) and PCS are determined. The size of slab specimens is $15mm(thickness){\times}50mm(width){\times}200mm(length)$. The results show that adding $CaCO_3$ whisker to THFS can significantly improve the flexural strength, TI, EFS, PCS of the slab. The empirical relation between reinforcing index ($RI_v$) and flexural parameters show that flexural parameters of slabs increase first and then decrease; which indicates that optimum $RI_v$ values can be helpful in the considering the mix design of steel-PVA fibers-$CaCO_3$ whisker composites for achieving the desired flexural-related properties. The scanning electron microscopy is performed to observe the micro-morphological characteristics of the fracture surface, which proved the positive hybrid effect among the different fibers in cementitious composites. The NHFS can arrest the generation and propagation of the crack from micro to macro level.

• Korean Journal of Adult Nursing
• /
• v.20 no.5
• /
• pp.778-790
• /
• 2008

Purpose: This study was conducted to develop Web-based multimedia contents for supporting student nurses' clinical practice on critical care, and to evaluate learners' responses. Methods: Based on the steps of Assessment, Design, Development, Implementation, & Evaluation(ADDIE) model, a total of 13 self-directed learning modules including live lectures and real video clips were developed through faculty collaboration of nine nursing colleges in Gwangju and Chonnam province. The finally developed multimedia contents were published on the Web of the learning management system at a local e-learning center. Results: The Web contents were evaluated after self-learning by 81 junior college nursing students who were encouraged to study it at their own pace during their two-week clinical practice at a medical or surgical intensive care unit of a university hospital and two hospitals. The knowledge (t = -27.66, p < .001) and self-evaluated clinical performance level(t = 7.54, p < .001) were significantly increased after learning of the Web contents and clinical practice, and satisfaction level that measured post-test only was 4.0 out of 5 point. Conclusion: The use of Web contents for critical care need to be extended as a complimentary material in a class room lecture or clinical practice of students to increase their self-learning ability and understandings of clinical knowledge and situation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.25-31
• /
• 2007

The recent frequent heavy rainfall has caused an increased in soil erosion and the soil drain which drained soil has caused decreased in channel radius and environmental problems by turbidity. In this study, the optimum size of the sediment basin was tested with soil erosion estimated from the Universal Soil Loss Equation (USLE) in the basin using by GIS data. The results show that the estimated soil erosion and the designed soil deposit are $72.1\;m^3$ and $85.0\;m^3$ respectively and the size of sediment basin is proper. In this study the water depth was calculated from the Hec-Ras model to test the stability of the bank and to prove submersion of the inside fields from stream overflow.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.2
• /
• pp.311-324
• /
• 2004

Software development undergoes a number of iterations and each iteration forms its own cycle going through requirement analysis, scheme and design, implementation and finally test and evaluation. In this iterated development process, executable releases are produced, improved and eventually developed to a complete system, going through this particular development cycle. Compared to the conventional process, the advantage of rapid iterative development process lies in reducing risk factors in early stage and responding to changes very flexibly. In addition, highly reusable, the process can improve capabilities of the development team while the project is being carried out. As a result, overall balance in quality is secured. The objective of this paper is the research of rapid development process and its case studies showing how to adapt the rapidly changing customer requirements and to transform those requirements into the project timely and adequately. The proposed process is focused on the common and core activities of NET-based MarMIIII, MSF/CD, XP, Agile, PSP and TSP

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.383-389
• /
• 2016

In this paper, we present the hull blasting machine with vision-based weld bead recognition device for cleaning shipment exterior wall. The purpose of this study is to introduce the mechanism design of the high efficiency hull blasting machine using the vision system to recognize the weld bead. Therefore, we have developed a robot mechanism and drive controller system of the hull blasting robot. And hull blasting characteristics such as the climbing mechanism, vision system, remote controller and CAN have been discussed and compared with the experimental data. The hull blasting robots are able to remove rust or paint at anchor, so the re-docking is unnecessary. Therefore, this can save time and cost of undergoing re-docking process and build more vessels instead. The robot uses sensors to navigate safely around the hull and has a filter system to collect the fouling removed. We have completed a pilot test of the robot and demonstrated the drive control and CAN communication performance.