• Child Health Nursing Research
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2013

Purpose: This study was done to develop a scenario and evaluate student performance in simulation learning of care for children with respiratory distress syndrome in neonatal intensive care units. Methods: To test the application effect, a one group pre-test design was applied. The scenario based on actual patients and textbook material was developed through several meetings of experts. The scenario was used with 17 groups of 55 senior nursing students who participated voluntarily. Results: Contents were organized focusing on the nursing process for simulation learning. In the application of knowledge and skills, nursing students had high scores in the contents of observation of oxygen saturation, and care to relieve dyspnea. Participants' ability, especially in suction and oxygen supply in the evaluation of objective structured clinical examination was not adequate. There was a significant positive correlation between problem-solving ability and satisfaction in learning. Conclusion: The respiratory distress syndrome simulation scenario developed in this study was an effective tool to give students experience in problem solving and critical thinking ability under conditions similar to reality. The development of various scenarios for child nursing care is needed.

• Tunnel and Underground Space
• /
• v.34 no.3
• /
• pp.231-247
• /
• 2024

In the field of high-level radioactive waste disposal targeting deep rock environments, hydraulic characteristic information serves as the most important key factor in selecting relevant disposal sites, detailed design of disposal facilities, derivation of optimal construction plans, and safety evaluation during operation. Since various rock types are mixed and distributed in a small area in Korea, it is important to conduct preliminary work to analyze the hydrogeological characteristics of rock aquifers for various rock types and compile the resulting data into a database. In this paper, we obtained hydraulic conductivity data, which is the most representative field hydraulic characteristic of a high-depth volcanic bedrock aquifer, and also analyzed and evaluated the field data. To acquire field data, we used a high-performance hydraulic testing system developed in-house and applied standardized test methods and investigation procedures. In the process of hydraulic characteristic data analysis, hydraulic conductivity values were obtained for each depth, and the pattern of groundwater flow through permeable rock joints located in the test section was also evaluated. It is expected that the series of data acquisition methods, procedures, and analysis results proposed in this report can be used to build a database of hydraulic characteristics data for high-depth rock aquifers in Korea. In addition, it is expected that it will play a role in improving technical know-how to be applied to research on hydraulic characteristic according to various bedrock types in the future.

• Science of Emotion and Sensibility
• /
• v.11 no.3
• /
• pp.313-324
• /
• 2008

The purpose of the study is to investigate the influence of Ring-Back-Tone(RBT) music on the evaluation of the phone-call receiver's personality in dimensions of Openness, Extroversion, and Neuroticism. In a preliminary test, the subjects listened to 17 RBT music stimuli in random order and assessed the personality associated with liking for each music(N=15). Among the 17 RBTs, three were selected to be used in Experiments I and II and they were distinguished from each other in terms of the three personality dimensions(p<0.001). In Experiment I, the subjects were divided into four groups and were asked to make a call to interview an unknown receiver(N=60). Different RBT music was installed depending on the group to which each subject belonged. It was found that different RBT influences the caller's evaluation of the receiver's personality, supporting Hypothesis 1(p<0.001). Moreover, the ratings of the receiver's were highly correlated with those of the RBT music stimuli in terms of Openness(r=0.722, p<0.001) and Extroversion(r=0.753, p<0.001). In Experiment II, an identical experiment design was applied for a new group of subjects who were acquainted with the receiver(N=40). It was hypothesized that previous knowledge about a person would weaken the RBT effect. The results showed that RBT exerted no effect on the evaluation of the receiver's personality when the caller knew the receiver. It was also found that 12 personality traits, where each of the three personality dimensions is described by four traits, facilitated assessment of the character of the RBT music as well as the personality of the receiver.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2010

This study is about what process and methodology could make UI designer be able to achieve the interface which considers user's mental model through implementing corporate line-up model, when people design an interface between product of multi-function printer and user. The most important concern of UI designers who are dealing with an interface between product and user is how they can make product system image match user's mental model so that users can utilize products without any confusion and discomfort. If concept model which designers bring up and mental model which users expect and recognize could be of one accord, then users can feel ease of use toward products. The understanding and observation for user behavior and use pattern is prerequisite to develop user-centered interface between product and user. However, UI designers do design interface from their own perspective and assumption in many business areas, and users do not react as designers assumed and intended in many cases or examples. This study is to find inappropriate system images against users' mental model on basic function of multi-function printer, and the relationship of system image and user's mental model is diagramed to build up a hypothesis. The hypothesis from this study is validated through evaluation of domestic and international users. In addition, two suggestions to improve usability problems revealed from user test are proposed. The optimal solution is designed based on the result of user evaluation and consideration of many user environments, and then it is implemented to line-up product. In conclusion, this study considers how UI designers can create system image which is close to user's mental model.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.2
• /
• pp.247-264
• /
• 1993

This study deals with the manufacturing of the foundation garments for the well-balanced somatotype of the Korean middle-aged womenhood. In order to get hold of the different somatotypes, a survey of a total of 134 middle-aged women in Kwangju area, ranging in their age from 45 through 59 was made. The statistical methods used for the analysis of the basic data were the Pearson's correlation coefficient, Anova, Cluster analysis and Stepwise. Emphasis of the try-on test was placed on (1) the comparison of anthropometric data before and after trying on the foundation garments, (2) sensory evaluation, (3) a rating on fit and performance, (4) the comparison by means of photograph. The conclusions obtained are as follows : 1) The 134 women sampled and measured were classified into the five groups of somatotype : the 52 women (34%) belong to Cluster 1 ; the 22 women(14.5%) belong in Cluster 2 ; the 12 women(7.9%) belong in Cluster 3 ; the 15 women(9.9%) belong in Cluster 4 ; the 33 women(27.7%) belong to Cluster 5. 2) As for the characteristics of the foundation garment design, the V-shaped neckline and chest dart was used. The adjust point is right above the perineum point. The foundation garment length is as far as trochanteric point. The materials used are cotton/polyurethane, lace, 100%cotton. The materials used for corrections were the sponge pad for the chest, and non-woven fabric pad for the back, shoulder and the hip. 3) The comparison of the anthropometric data of the subject when dressed in foundation garments showed a significant difference in bust point height, in bust point length and in nipple-ta-nipple breadth, which proves the foundation garments to be effective in correcting such part as the chest, the hip and the abdomen. 4) As considered in terms of the sensory evaluation, the item except for the shoulder and the armhole coincided with each other in the mean value and in the composite reliability coefficient, which also proves the foundation garments to be effective. 5) Subjects were satisfactory on fit, performance, design, of the foundation garment, and their changed appearance. 6) In the case of the comparison through the photographs, the silhouettes of all the five women subjects were found effectively to be balanced.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.9
• /
• pp.23-32
• /
• 2015

This study examined blast testing measurement data which had been obtained from 97 field sites in Korea to investigate the comprehensive characteristics of rock blasting-induced vibration focusing on the effect of excavation types (tunnel, bench) and rock types. The measurement data was from the testing sites mostly in Kangwon province and Kyungsang province and rock types were granite, gneiss, limestone, sand stone, and shale in the order of number of data. The study indicated that the blasting-induced vibration velocity was affected by the excavation types (tunnel, bench) and bench blasting induced higher velocity than tunnel blasting. In addition, the vibration velocity was also highly affected by the rock types and therefore, it can be concluded that rock types should be considered in the future to estimate a blasting-induced vibration velocity. Furthermore, the pre-existing criteria was compared with the results of this study and the comparison indicated that there was a discernable difference except for tunnel blasting results based on the square root scaling and therefore, further studies and interests, which include the effects of rock strength, joint characteristics, geological formation, excavation type, power type, measurement equipment and method, might be necessarily in relation to the estimation of blasting-induced vibration velocity in rock mass.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1333-1342
• /
• 2008

This study intended to evaluate the visual sensibility of textiles of knitting simulation through the painting function of SDS-ONE, a computer knitting system, with the use of various fancy yarns for hand knitting. For this study, six kinds of fancy yarns with difference manufacturing style and form were selected: loop yarn, tamtam yarn, fur1 yarn, fur2 yarn, ladder yarn, and tape yarn. In order to create a computer knitting simulation, paint function of SDS-ONE was employed to scan the fancy yarns for hand knitting with a scanner. Then, after the registration of the yarns as data, the yarn was brought in for knitting simulation in plain stitch with 3 gauge. After that a survey was conducted involving 60 female experts in their twenties. Using SPSS 12.0, factor analysis, reliability, Pearson correlation coefficient, ANOVA, Duncan test, and regression analysis were performed to analyze the collected data. First, according to the result of analyzing the visual sense factor, three factors of the 'inflexibleness/ruggedness sense', 'lightweight sense', and 'smoothness sense' was extracted. According to the result of analyzing the visual sensibility factor, three factors of the 'activity', 'grace', and 'purity' was extracted. Second, With regard to preference and purchase intention, the knitted fabric with tamtam yarn(H2) was preferred than the other samples, indicating that the respondents had intention to purchase it. As for word-of-mouth intention, H2 ranked the first place, implying the respondents had intention to recommend it to other people. Third, the examination of the use of products each knitting simulation knit found that sweater and muffler are the most appropriate knit products. And H2 was the most suitable sample for sweater and muffler products. This study tried to prove that knit textile can be visually evaluated through a computer knitting simulation without the actual knitting and then to provide accurate data to related companies or the academic circle.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.49-58
• /
• 2020

In domestic construction sites, when installing steel pipe scaffolding and system scaffolding, the guardrails are installed after the installation of the work platforms. This conventional guardrail system (CGS) is always exposed to the risk of falls because the safety railing is installed later. In order to prevent fall disasters during erecting and dismantling scaffolds, it is necessary to introduce the advanced guardrail system (AGS) which installs railings in advance of climbing onto a work platform. For the introduction of the AGS, the structural performance of the system scaffolding applying the CGS and the AGS was compared and evaluated. The structural analysis of the system scaffold (height: 31 m and width: 27.4 m) with AGS confirmed that structural safety was ensured because the maximum stress of each element of the system scaffolding satisfies the allowable stress of each element. As a result of performance comparison of CGS and AGS for each element, the combined stress ratio of vertical posts in AGS was 6.4% lower than that of CGS. In addition, in the case of ledger and transom, the combined stress ratios of AGS and CGS were almost the same. The compression test of the assembled system scaffolding (three-storied, 1 bay) showed that the AGS had better performance than the CGS by 9.7% (8.91 kN). The cross bracing exceeds the limit on slenderness ratio of codes for structural steel design. But the safety factor for the compressive load of the cross bracing was evaluated as meeting the design criteria by securing 3 or more. In actual experiments, it was confirmed that brace buckling did not occur even though the overall scaffold was buckled. Therefore, in the case of temporary structures, it was proposed to revise the standards for limiting on slenderness ratio of secondary or auxiliary elements to recommendations. This study can be used as basic data for the introduction of AGS for installing guardrails in advance at domestic construction sites.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.447-458
• /
• 2002

In this paper, we design and implement Wireless Transaction Protocol(WTP) and evaluate it for wireless transaction processing in mobile computing environments. The design and implementation of WTP are based on the coroutine model that might be suitable for light-weight portable devices. We test the compatibility between our product and the other products such as Nokia, Kannel and WinWAP For the evaluation of WTP, we use an Internet simulator that can arbitrary generate random wireless errors based on the Gilbert model. In our experiment, the performance of WTP is measured and compared to those of Transmission Control Protocol(TCP) and TCP for Transactions. The experiment shows that WTP outperforms the other two protocols for wireless transaction processing in terms of throughput and delay. Especially, WTP shows much higher performance In ease of high error rate and high probability of burst errors. This comes from the fact that WTP uses a small number of packets to process a transaction compared to the other two protocols and introduces a fixed time interval for retransmission instead of the exponential backoff algorithm. The experiment also shows that the WTP performance is optimized when the retransmission counter is set to 5 or 6 in case of high burst error rate.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.1
• /
• pp.33-38
• /
• 2019

Thermal power generation accounts for the highest percentage of domestic power generation, among which coal-fired boiler generation accounts for the highest percentage. Coal boilers generate harmful substances and fine dust during coal combustion and have a serious effect on air pollution. So, fluidized-bed boilers have been introduced as eco-friendly coal boilers. It uses a fluid medium which affect the combustion temperature of coal. Because of it fluidized-bed boilers emit less pollutants than original one. Water-wall tubes play an important role in this fluidized bed boiler. Due to the fluid medium, the wall damage is more severe than the existing boiler. However, there is no quantitative maintenance technique in Korea yet. Remote field eddy current testing is a non-destructive evaluation technique that is often used for inspection of inner and outer wall of tube. it can inspect with non-contact and high speed. However, it is an inspection that proceeds from inside the pipe, and the water-wall tube is not able to enter the interior. In this study, we designed and simulated an external remote field eddy current sensor suitable for water-wall tube of a fluidized - bed boiler using simulations. By obtaining a signal similar to the existing remote field eddy current test, the criteria for the external remote field eddy current sensor design can be presented.