• 교육녹색환경연구
• /
• 제11권1호
• /
• pp.1-10
• /
• 2012

Establishing public kindergarten is very important in social welfare aspects. So far almost public kindergarten were built up as attached style in primary school. More independent style kindergarten is being requested for small land area, shorter commuting distance. But the standard design guideline of the independent public kindergarten is insufficient. The purpose of this study is to examine the architectural Planning direction for the standard design guideline of the independent public kindergarten. A result of this study can be suggested what kind of architectural Planning direction of independent public kindergarten is needed more acutely.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.659-662
• /
• 2006

플랜트 산업은 2004년도 기준 해외 건설 수주액의 70%를 차지하는 매우 중요한 산업이다. 플랜트 산업의 기술력은 일부 시설관련 상세설계와 시공부문의 경쟁력을 확보한 상태이다. 그러나 플랜트 산업 가운데 고부가가치 창출이 가능한 기획, 기본설계 기술이 미흡하여 기술력 향상이 필요하다. 따라서 고부가가치 창출이 가능한 기획, 기본설계 기술 경쟁력을 향상시키기 위하여 플랜트 설계를 위한 표준코드의 문제점 및 개선방향을 제시하고자 한다.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.307-313
• /
• 2021

In this study, the comparative analysis, among the design standard value of distribution power, the calculated value from the measurement data of strand and the empirical data of the distribution line itself, have been performed for the elastic coefficients and linear expansion coefficients of distribution line conductors. The empirical values of elastic coefficients were lower about 10.6%(892kgf/mm²) than those of the design standard value of the distribution power and there were a little difference between the empirical values of linear expansion coefficients and the design standard value of the distribution power. From the above results, it could be concluded that the empirical values of conductor characteristics should be used in the dip design and installation of distribution line.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.157-167
• /
• 2008

Through this study, the standard design guidelines for high speed train with power cars have been derived to meet the crashworthiness requirements of the Korean rollingstock safety regulation. The crashworthiness regulation requires some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 kph, and a collision against a standard deformable obstacle of 15 ton at 110 kph. A standard high speed train composition was defined as 2PC-2ET-6T with 17ton axle load, similar to KTX-2 for the Honam express line. Using theoretical and numerical analyses, some crashworthy design guidelines were derived in terms of mean crush forces and energy absorptions for major crushable components. The derived design guidelines were evaluated and improved using one dimensional spring-mass dynamic simulation. It is shown from the simulation results that the suggested design guidelines can easily satisfy the domestic crashworthiness requirements.

• 한국의상디자인학회지
• /
• 제18권2호
• /
• pp.237-251
• /
• 2016

The purpose of this study is to provide the improvement idea for an school uniform styling that better satisfies female high school students' changing demands, through evaluating images differences according to design variation in school uniforms. This study was carried out with a between-subject design by using the stimulant materials of school uniform design and image assessment scale. The stimulant materials used for this study were 27 designs with blazer/skirt ensemble and 21 designs with vest/skirt ensemble. The survey materials were collected through a questionnaire from a total of 192 female high school students living in Gyeongsangnam-do. As a result of analyses on a image of blazer/skirt ensembles, 4 factors were extracted such as neatness, uniqueness, activeness, and attractiveness. Blazer was the only variables that exerted significant effects on neatness, uniqueness, and attractiveness. As a result of analyses on a image of vest/skirt ensembles, 4 factors were extracted such as attractiveness, neatness, uniqueness, and activeness. Skirt was the only variables that exerted significant effects on attractiveness, neatness, and uniqueness. Neat image was perceived to be high in ensembles of standard blazer/standard collar/horizontal-seam skirt, standard vest/skirt with horizontal color combination, and buttons-down vest/horizontal-seam skirt. Unique image was perceived to be high in ensembles of blazer with bindings/standard collar/solid skirt, and vest with pockets/skirt with vertical bindings. Also, active image was perceived to be high in ensembles of vest with pockets/skirt with vertical bindings, and buttons-down vest/skirt with vertical bindings. Attractive image was perceived to be high in ensembles of blazer with bindings/peaked lapel/skirt with vertical bindings, and standard vest/horizontal-seam skirt. In conclusion, this study reveals that different items and pieces of school uniforms can be combined in many different ways to create quite diverse looks. Thus, this study provides important basic data for research on teenagers' fashion and clothing.

• 한국지반환경공학회 논문집
• /
• 제8권3호
• /
• pp.51-57
• /
• 2007

강우시의 비탈면 설계에서는 강우특성변화에 따라 지하수위가 지표면에 위치하는 것으로 가정한다. 또한, 안정성 검토는 비탈면 설계시 대절토 비탈면을 대상으로 수행하는 반면, 안정성 검토가 수행되지 않는 비탈면에 대해서는 설계기준에 규정된 표준 경사가 적용된다. 강화된 지하수위 적용기준에도 불구하고 강우시 비탈면의 규모와 관계없이 비탈면 붕괴가 지속적으로 발생되고 있다. 붕괴원인을 조사하기 위하여 본 연구에서는 지반 조건별로 건기시와 우기시에 대하여 국내 시방기준에서 제안하고 있는 토사 비탈면의 표준경사에 대하여 안정성을 검토하였다. 시방기준에서 제시된 비탈면 표준경사는 건기시나 우기시 모두 안정해야 함에도 불구하고, 검토 결과는 많은 경우에서 기준 안전율이 얻어지지 않는 것으로 나타났다. 건기시의 경우는 전체 검토대상 조건에 대하여 약 50% 이상, 우기시의 경우 약 65% 이상이 기준 안전율을 만족하지 못하였다. 이러한 결과를 바탕으로 본 논문은 현 설계기준의 문제점을 지적하고 대책수립을 위한 방안을 제안하고 있다.

• 한국환경과학회지
• /
• 제6권6호
• /
• pp.645-658
• /
• 1997

A study on ventilation design using the spreadsheet model is carried out to propose means of available design. A sample of complex ventilation system In the non-standard condition Is used to illustrate thins spreadsheet model. In developing the spreadsheet model, this study has attempted to it general by using computional equations and design parameters that can be readily applied to any spreadsheet software. Also, most design data is contained in the spreadsheet template. This template provides the same design information as the ACGIH worksheet, and operates Quickly and emclenuy, and is fiexible enough to use under different conditions. This spreadsheet model allows the ventilation engineer to design quickly and accurately the ventilation system, without spending too much effort In the design process. By storing on computer and diskette, the design data computed finally can be used as a permanent record of specific ventilation system, and because of finally to be able to design over and over again while making only slight changes to the Input data, the spreadsheet model is used availably to accomplish the design optimazation by redesign and troubleshooting by review from field measurements. Also, the spreadsheet model is available for designing ventilation system under different condition or evaluating existing system or design drawing, because changes In the layout or formulae can be readily made to fit the needs of the designer.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권2호
• /
• pp.78-88
• /
• 1989

The fundamental objective of this paper has been to develop a means for incoporating the concept of the linear fractional transformation more generally and easily into multivariable feedback design procedure. When we design a continuous system, generally, we are constrained by design methods which arise specifically for the system. Also, in the design of descrete systems, it is the same concept. But the approach developed in this paper is very flexible in the view that in spite of being the continuous or discrete, the design can be done using a well known design method in both cases. That is, when we design a contnuous system or discrete system, the design can be done by a standard design method of continuous systmes or discrete ones, depending on the choice of the linear fractional transformation. Therefore, it is noted that this concept has broken the unflexibility of the conventional design rules for multivariable control system. In essence, the concept shows that if a given system is controllable, some desirable design, for examples, pole assignment within prespecified region, optimal controllers with poles within prespecified region etc., could be done easily by transforming a desirable region into a standard region, such as the complex left-half plane or the unit disk, by the chosen linear fractional transformation, and then by designing the transformed system using the well known standard results.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.353-356
• /
• 2008

Recently, high-rise buildings have been increased with the development of economy in domestic, and theses fire riskiness has been brought up. However, fireproof design standards is not enough. So, this study was to make a comparative study on the fire resistance design standards of building in domestic and foreign. As a results, it is necessary that fireproof design standards is revised.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 춘계학술대회
• /
• pp.295-299
• /
• 2008

This paper discusses tests of factor effect or contrast by the use of saturated design $k^n$ factorial design. The nine nonparametric rank measures in normality test using normal probability pot are proposed. Length's PSE(Pseduo Standard Error) test [4] which relies on the concept of effect sparsity is also introduced and extended to the margin of error(ME) and Simultaneous margin of error(SME).