• Journal of Radiation Protection and Research
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2009

It is expected that a substantial amount of spent fuels will be transported from the four nuclear power plant (NPP) sites in Korea to a hypothetical centralized interim storage facility or a final repository in the near future. The cost for the transportation is proportional to the amount of spent fuels. In this paper, a cost estimation program is developed based on the conceptual design of a transportation system and a logistics analysis. Using the developed computer program, named as CASK, the minimum capacity of a centralized interim storage facility (CISF) and the transportation cost for PWR spent fuels are calculated. The PWR spent fuels are transported from 4 NPP sites to a final repository (FR) via the CISF. Since NPP sites and the CISF are located along the coast, a sea-transportation is considered and a road-transportation is considered between the CISF and the FR. The result shows that the minimum capacity of the interim storage facility is 15,000 MTU.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.spc
• /
• pp.63-74
• /
• 2020

The operational safety assessment is an important part of a safety case for the deep geological repository of spent fuels. It consists of different stages such as the identification of initiating events, event tree analysis, fault tree analysis, and evaluation of exposure doses to the public and radiation workers. This study develops a probabilistic safety assessment method for the operational safety assessment and establishes an assessment framework. For the event and fault tree analyses, we propose the advanced information management system for probabilistic safety assessment (AIMS-PSA Manager). In addition, we propose the Radiological Safety Analysis Computer (RSAC) program to evaluate exposure doses to the public and radiation workers. Furthermore, we check the applicability of the assessment framework with respect to drop accidents of a spent fuel assembly arising out of crane failure, at the surface facility of the KRS⁺ (KAERI Reference disposal System for SNFs). The methods and tools established through this study can be used for the development of a safety case for the KRS⁺ system as well as for the design modification and the operational safety assessment of the KRS⁺ system.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.02a
• /
• pp.35-38
• /
• 2008

멀티 에이전트 시스템 환경에서 에이전트들은 자신이 제공하는 서비스에 대해 일정한 형태로 멀티 에이전트 시스템의 저장소에 서비스를 등록, 삭제, 검색할 수 있는 기능을 갖는다. 효율적인 서비스의 저장소인 DF (Directory Facilitator)는 에이전트들이 제공하는 서비스에 대한 옐로우 페이지 서비스를 제공한다. 에이전트 간의 협업을 위한 에이전트 플랫폼에서 서비스 디스커버리 기능을 지원하기 위한 DF 개발은 각각의 서비스를 지원하는 에이전트와 사용자 에이전트간의 서비스를 유지하여야 한다. 본 논문에서 제안하는 DF는 서비스 예약 기능을 제공함으로써 사용자 에이전트에게 좀 더 편리한 서비스 검색 메커니즘을 제공하는 것에 목적을 두고 있다. DF로 사용자 에이전트가 서비스를 등록 했을 경우에 Reservation Repository를 통하여 그 등록한 서비스가 다른 사용자 에이전트가 제공받고자하는 서비스인 경우를 인지했을 때 Reservation Repository에 등록된 에이전트주소와 서비스이름을 토대로 하여 예약한 사용자 에이전트와 서비스를 제공하게 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.151-162
• /
• 2010

In order to build up the ubiquitous computer environment, there are many researches on automatic identification, sensor networks, and home networks etc. EPCIS (EPC Information Services), which is proposed by EPCglobal, is a standard on the repository managing tag data that is needed to develop RFID application system. In this paper, the EPCIS repository is designed and implemented. It is able to search the object dependent upon general object recognition and environment information variation. And sensor data, which is also massive data and is changed with position, is integrated into RFID data in the system. By doing so, it is possible to do the convergence managements of object recognition with variations of USN (Ubiquitous Sensor Network) environment.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1524-1533
• /
• 2021

The structural stability of a waste package is essential for containing radioactive waste for the long term in a repository. A silo-type disposal facility would require more severe verification for the structural integrity, because of radioactive waste packages staked with several tens of meters and overburdens of crushed rocks and shotcretes. In this study, structural safety was analyzed for a silo-type repository, located approximately 100 m below sea level in Gyeongju, Korea. Finite element simulation was performed to investigate the influence of the loads from the backfilling materials and waste package stacks on the mechanical stress of the disposed of wastes and containers. It was identified that the current design of the waste package and the compressive strength criterion for the solidified waste would not be enough to maintain structural stability. Therefore, an enhanced criterion for the compressive strength of the solidified waste and several reinforced structural designs for the disposal concrete container were proposed to prevent failure of the waste package based on the results of parametric studies.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2819-2827
• /
• 2022

The disposal area of a deep geological repository (DGR) for the disposal of spent nuclear fuels (SNFs) is estimated considering the spacing between deposition holes and between disposal tunnels, as determined by a thermal analysis using the decay heat of a reference SNF. Given the relatively large amount of decay heat of the reference SNF, the disposal area of the DGR is found to be overestimated. Therefore, we develop a computer program using MATLAB, termed ACom (Assembly Combination), to combine SNFs when stored in canisters such that the decay heat per canister is evenly distributed. The stability of ACom was checked and the overall distribution of the decay heat per canister was analyzed. Finally, ACom was applied to disposal scenarios suggested in the conceptual design of a DGR for SNFs, and it was confirmed that the decay heat per canister could be evenly distributed and that the maximum decay heat of the canister could be much lower than that of a canister estimated using a reference SNF. ACom can be used to improve the disposal efficiency by reducing the disposal area of a DGR for SNFs by ensuringg a relatively even distribution of decay heat per canister.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2350-2364
• /
• 1999

In this paper, we propose a method of class library repository design for provide reuser the object-oriented C++ class component. To class library design, we started by studying the characteristics of a reusable component. We formally defined the reusable component model using an entity relationship model. This formal definition has been directly used as the database schema for storing the reusable component in a repository. The reusable class library may be considered a knowledge base for software reuse. Thus, we used that Enumerative classification of breakdown of knowledge based. And another used classification is clustering of based on class similarity. The class similarity composes member function similarity and member data similarity. Finally, we have designed class library for hierarchical inheritance mechanism of object-oriented concept Generalization, Specialization and Aggregation.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.397-406
• /
• 2004

Usually, design method to use UML by Object-Oriented Modelling is used much. But, generation of Metadata that use UML is not easy by difference of expression about detailed functions that Is Involved language and this in environment that differ. In this paper that solution method use XML Metadata Interchange Format(XMI) for standardization and normalization of Pattern and Class. And, for design of Metamodel select frequency A many 4 element of use among XMI Metamodel and create Metadata. Design DB repository for created Metadata storing and add pattern and Information about each class composition and use query and did so that reusability and extension of Metadata nay be easy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.320-323
• /
• 2008

Due to the improvement of mobile device capabilities, a demand for various contents service is increasing. But the differences from heterogeneous mobile devices force to develop contents which is dependent on a mobile. To solve this problem, adaptation course that reorganize contents by the device capability is needed. In this course, device description is described using device description language but there are some problems that is absence of device description repository and the way to get device description data. In this paper, I suggest device description acquisition module and define the interfaces to access device description repository that I designed and implemented.

• The KIPS Transactions:PartD
• /
• v.12D no.4 s.100
• /
• pp.531-542
• /
• 2005

In this paper, we propose the MDBMS(Multi-DataBase Management System) which integrates the LDBMSs(Local DataBase Systems) with heterogeneous environment into distributed system and provides global users with rapidly query process. For designing the MDBMS, we define the functions of components and design the interaction among them. In a point of view of the global view manager in components, we describe the following 3 cases; (1)the case which the results for the global query are all stored to the global view repository, (2)the case which no result exists in the global view repository, and (3)the case which the partial results we stored to the global view repository. By comparing above cases, we establish the functionalities of our MDBMS through the sequence diagram including the interlace of among objects and the method calling. Finally, we propose the model designed in the concrete by showing the executing procedures of each function using sample query on established functions mentioned above.