• Membrane Journal
• /
• v.30 no.1
• /
• pp.21-29
• /
• 2020

In this study, we have established the optimum design condition of pore-filled anion-exchange membrane for all-vanadium redox flow battery (VRFB). From the experimental results, it was proven that the membrane design factors that have the greatest influence on the charge-discharge performance of VRFB are the ion exchange capacity, the porosity of substrate film, and the crosslinking degree. That is, the ohmic loss and the crossover of active materials in VRFB were shown to be determined by the above factors. In addition, two methods, i.e. reducing the ion exchange capacity at low crosslinking degree and increasing the crosslinking degree at high ion exchange capacity, were investigated in the preparation of pore-filled anion-exchange membranes. As a result, it was found that optimizing the crosslinking degree at sufficiently high ion exchange capacity is more desirable to achieving high VRFB charge-discharge performances.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.3-12
• /
• 2010

This study mainly focused on the intergenerational exchange as a plan to revitalize the social participation of the elderly. The purpose of the study is to propose a plan for revitalizing future intergenerational exchange through the present condition analysis in the aspects of activity, space and consciousness for the elderly-centered intergenerational exchange. The study scope is the local welfare level, broad sense of exchange for the aged, children, youths and local residents, and the study objects are the personnel in charge of welfare policy and the staff in charge of operating general social welfare centers and the users of the facilities users. A survey questionnaire type research was sent through post mail to 278 social welfare centers, and 384 government offices within the jurisdictions. Among them, the responses were collected from 22 general social welfare centers and 26 offices within the jurisdictions. A proposal of a plan to revitalize intergenerational exchange that needs to be implemented in future based on the consideration of the present condition and characteristics of the intergenerational exchange of general social welfare center.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.122-132
• /
• 2003

STEP AP218 has a standard schema to represent the structural model of a midship section. While it helps to exchange ship structural models among heterogeneous automation systems, most shipyards and classification societies still exchange information using 2D paper drawings. We propose a feature parameter input method to generate a 3D STEP model of a ship structure from 2D drawings. We have analyzed the ship structure information contained in 2D drawings and have defined a data model to express the contents of the drawing. We also developed a QUI for the feature parameter input. To translate 2D information extracted from the drawing into a STEP AP2l8 model, we have developed a shape generation library, and generated the 3D ship model through this library. The generated 3D STEP model of a ship structure can be used to exchange information between design departments in a shipyard as well as between classification societies and shipyards.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.1
• /
• pp.48-58
• /
• 2001

One of the biggest problems of rapid prototyping(RP) technologies lies in their standard file format for CAD data exchange. Current methods using the de facto industry standard 'STL'have at times resulted in problems such as accuracy, redundancy, and integrity. In this paper we propose a STEP based data exchange framework for rapid prototyping systems. In this paradigm of data exchange, STEP models can be imported and converted into faceted B-rep. solid models for visualization and 2-D layer data for RP. Also an STL model, on the other hand, can be converted into a faceted B-rep. STEP model and exported as a new data exchange model with RP information.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.30-36
• /
• 2004

The exchange of model design data among heterogeneous CAD systems is very difficult because each CAD system has different data structures suitable for its own functions. STEP represents product information in a common computer-interpretable form that is required to remain complete and consistent when the product information is needed to be exchanged among different computer systems. However, STEP has complex architecture to represent point, line, curve and vectors of element. Moreover it can't represent geometry data of feature based models. In this study, a structure of XML document that represents geometry data of feature based models as neutral format has been developed. To use the developed XML document, a converter also has been developed to exchange modules so that it can exchange feature based data models among heterogeneous CAD systems. Developed XML document and Converter have been applied to commercial CAD systems.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.45-53
• /
• 2003

This paper addresses the issues related to the development of product model and applications fer nuclear power plants based on STEP and PLIB standards. The ISO standards which can be applied are; STEP(Standard for the Exchange of Product Model Data) AP(application protocol) 221/231, AP 230/225, AP 227, ISO 13584 PLIB, ISO 15926 RDL. The data models of the AP's and ISO 15926 RDL are reviewed and an application system is proposed to exchange and share the design data of the nuclear power plant.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.169-185
• /
• 1997

This paper presents the design concepts and the system architecture of a mobile exchange for CDMA Mobile System. The paper also discusses complex subsystems in this system and design concepts of these subsystems. To evaluate the performance of the CDMA Mobile System, we have performed a computer simulation based on the framework of the mobile exchange. Simulation results are presented in terms of network traffic load (call attempts per second) and database performance requirements (transactions per second.)

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.2
• /
• pp.175-182
• /
• 2004

As a bridge between design and manufacturing, process planning is to generate a sequenced set of instructions to manufacture the specified part. Automatic interpretation of manufacturing information incorporated in the design documentation such as CAD file has been a knotty subject for manufacturing engineers since no current data exchange format for product data provides a perfect interface between heterogeneous systems. The recent neutral data exchange format STEp, standard for the exchange of product model data, includes not only geometry but also technical and managerial information. STEP AP(Application Protocol) 224 is specifically dedicated to the mechanical product definition for process planning using machining features. Given a design information in STEP AP 224 format, process planning can be made without human intervention. This paper describes a method to determine the sequence of machining features by using the machining features and the manufacturing information expressed in STEP AP224.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.27-40
• /
• 2006

The exchange of parameterized feature-based CAD models is important for product data sharing among different organizations and automation systems. The role of feature-based modeling is to gonerate the shape of product and capture design intends In a CAD system. A feature is generated by referring to topological entities in a solid. Identifying referenced topological entities of a feature is essential for exchanging feature-based CAD models through a neutral format. If the CAD data contains the modification history in addition to the construction history, a matching mechanism is also required to find the same entity in the new model (post-edit model) corresponding to the entity in the old model (preedit model). This problem is known as the persistent naming problem. There are additional problems arising from the exchange of parameterized feature-based CAD models. Authors have analyzed previous studies with regard to persistent naming and characteristics for the exchange of parameterized feature-based CAD models, and propose a solution to the persistent naming problem. This solution is comprised of two parts: (a) naming of topological entities based on the object spore information (OSI) and secondary name (SN); and (b) name matching under the proposed naming.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.4
• /
• pp.240-247
• /
• 2002

Most commercial CAD systems provide parametric modeling functions, and by using these capabilities designers can edit a CAD model in order to create design variants. It is necessary to transfer parametric information during a CAD model exchange to modify the model inside the receiving system. However, it is not possible to exchange parametric information of CAD models based on the cur-rent version of STEP. The designer intents which are contained in the parametric information can be lost during the STEP transfer of CAD models. This paper introduces a hybrid CAB model translator, which also uses the feature tree of commercial CAD systems in addition to the macro file to allow transfer of parametric information. The macro-parametric approach is to exchange CAD models by using the macro file, which contains the history of user commands. To exchange CAD models using the macro-parametric approach, the modeling commands of several commercial CAD systems are analyzed. Those commands are classified and a set of standard modeling commands has been defined. As a neutral fie format, a set of standard modeling commands has been defined. Mapping relations between the standard modeling commands set and the native modeling commands set of commercial CAD systems are defined. The scope of the current version is limited to parts modeling and assemblies are excluded.