• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.3 s.18
• /
• pp.38-46
• /
• 2004

This paper deals with the development of simulation model for the horizontal launch at submarines in the preliminary design phase. The simulation model is composed of submarine motion model, cross flow force model in the bow of submarine, and weapon motion model In launch through torpedo tubes. Using submarine and weapon characteristics and simulation condition, it can simulate the exit velocity of weapon through torpedo tubes and reaction forces. It should be helpful for the analysis of the safe launch and design requirements in the preliminary design phase of a submarine or a weapon launched through torpedo tubes.

• ETRI Journal
• /
• v.26 no.4
• /
• pp.307-314
• /
• 2004

The application of a discrete pseudomorphic high electron mobility transistor (p-HEMT) as a grounded switch allows for the development of low cost phase shifters and phase modulators operating in a Ku band. This fills the gap in the development of phase control devices comprising p-i-n diodes and microwave monolithic integrated circuits (MMICs). This paper describes a discrete p-HEMT characterization and modeling in switching mode as well as the development of a low-cost four-bit phase shifter and direct quadrature phase shift keying (QPSK) modulator. The developed devices operate in a Ku band with parameters comparable to commercially available MMIC counterparts. Both of them are CMOS compatible and have no power consumption. The parameters of the QPSK modulator are very close to the requirements of available standards for satellite earth stations.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.72-82
• /
• 2018

Generally speaking, because of complexity of engineering process, the systems engineering may be not easy to understand clearly and not easy to perform also. The status of systems engineering infrastructure of the some Korean industry is not matured yet, i.e., the systems engineering process, method, tool and environment is not implemented consistently within the steel making industry. These difficulties are more severe at the concept and basic design phase than the detail design phase relatively. Korean industry has lots of development project for the precedented systems and usually has matured domain knowledge for the precedented systems. Even though there is a mature domain knowledge of the precedented systems, the development project will lead to failure under the condition of engineering system is not well equipped. For the project success, it is very important to have a proper engineering execution system especially for the concept design and basic phase, which has a high abstraction and a large influence on the whole project. This paper proposes a minimized design process that can be easily applied to the concept and basic design phase of the precedented systems, instead of complex system engineering processes. This paper also proposes the application case of the minimized design process and methods for a Blast Furnace System.

• Journal of the Korean Professional Engineers Association
• /
• v.26 no.1
• /
• pp.18-28
• /
• 1993

The Studies on Quality Assurance Activities at the Phase of Planning - Design Are Quite Rare, While Those Activies are very Important, This Study is Focused on the Applicability of Quality Function Development System to the Phase of Planning-Design, With a Matrix of the Quality Assurance Activities and Quality Function Develop-ment System. The Application of a Quality Function Development System to the Quality Assurance Activities (1) Makes it Easier to Easier out the Quality Level that Consumers Demand and Varies Rapidly, and (2) Makes it Possible to Link the Production to the Quality Level that Consumers Demand by the Quality Specification.

• Journal of Multimedia Information System
• /
• v.4 no.3
• /
• pp.157-162
• /
• 2017

The title of this project is "A Simple Interactive 3D Interior Design Application for Living Room - Cost Management", focusing on developing an application that enables costing and designing to be executed concurrently in interior design phases. This is because any changes made at costing phase after design phase is completed, it will potentially lead to unnecessary increase in cost and time. Therefore, the objective of this project is aimed to devise a cost management module to be included in the proposed application, allowing interior designer to make cost-based decision at the designing phase itself. This can be achieved through its proposed functions which include total cost update, budget management, cost estimator calculator and material list generation. The methodology being proposed in this project is Prototyping Development, categorized under Rapid Application Development (RAD), by starting off with planning, analysis, design and implementation phases are performed concurrently and repeatedly in a cycle to produce a prototype until the application is completed. In the end of this project, the developed prototype is expected to contribute a better solution towards cost management in interior design.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.57-68
• /
• 2014

This paper propose a development of squirrel-cage induction motor(IM) for 5-phase 1.5kW, 220V, 60Hz in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase a IM, such as reducing a amplitude of torque pulsation, decreasing electric noises, and increasing the reliability. Designed methods of the motor use a development tools with Maxwell 2D and Simplorer program. There are designed drawing of manufactured frames of the IM. amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages and current, and reviewing a experiment results are shown by variable output. We are presenting a design and manufacture methods for the 5-phase squirrel-cage IM.

• Journal of Information Technology Applications and Management
• /
• v.11 no.2
• /
• pp.167-178
• /
• 2004

Different from traditional development methodologies like waterfall model, the CBD (component based development) methodology relies on a building block approach in the design and development of information system. The audit procedure and checklist for the traditional IS development methodology are required to be modified to be suitable for CBD. This research reviewed IS audit guidelines for the existing development process and analyzed multiple projects that employed the by component based development process. For the purpose of this study, we chose a governmental project and a next-generation IS project of a financial agency as sample cases. By comparing existing IS audit checklists and items actually reviewed in audit projects, this study identified appropriate check items for the CBD-centric audit program. New items were proposed as additional items such as project control in management phase, usage case and conceptual model establishment, component evaluation and design, in implementation phase, and so forth. The result of the research provides new guidelines for the audit CBD projects for the purposed of increased efficiency and qualify of application development projects.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.3 s.15
• /
• pp.128-136
• /
• 2003

The contractors which execute the design-build project have difficulties in design management and contract administration in the pre-construction phase because they have managed construction projects focused on only construction phase so far. Moreover, they have to manage the design development stage without any contingency following-up various design revisions from the design reviews of outside experts. Therefore, the design management in the design development stage is a critical success facto. of the design-build project. The objective of this study is to structure the problems in the management skill for design development phase in the domestic design-build projects and to suggest a design development management method to settle the problems. To achieve these objectives, this study 1) analyzes the prior studies about the design-build procurement methods, 2) designs and performs a case study to embody the problems of the domestic design-build projects, and 3) proposes a method of design development management by analyzing the results of case study and interviewing experts.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.413-420
• /
• 2017

We investigate the performance of a true time delay(TTD) phase shifter to reduce the beam squint caused by frequency changes of a phased array antenna in wideband communication systems. To design a high gain phased array antenna, we need a long TTD, which causes high RF loss, low resolution and large dimension of TTD phase shifters. To overcome the problems, we propose a schematic of dual TTD phase shifters, which consists of short time delay(STD) in radio frequency(RF) part and long time delay(LTD) in intermediate frequency(IF) part. Our analysis results show that the proposed scheme reduces the required bits and delay time in RF band of the TTD compared to the conventional single TTD scheme.