• 대한산업공학회지
• /
• 제31권1호
• /
• pp.87-98
• /
• 2005

This research investigates economic-statistical characteristics of variable sampling size and interval (VSSI)$\bar{X}$charts under two assignable causes. A Markov chain approach is employed in order to calculate average run length (ARL) and average time to signal (ATS). Six transient states are derived by carefully defining the state. A steady state cost rate function is constructed based on Lorenzen and Vance(1986) model. The cost rate function is optimized with respect to six design parameters for designing the VSSI $\bar{X}$ charts. Computational experiments show that the VSSI $\bar{X}$ chart is superior to the Shewhart $\bar{X}$ chart in the economic-statistical sense, even under two assignable causes. A comparative study shows that the cost rate may increase up to almost 30% by overlooking the second cause. Critical input parameters are also derived from a sensitivity study and a few guideline graphs are provided for determining the design parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.833-845
• /
• 2001

Quantitative Feedback Theory(QFT) has been used to design a robust power system stabilizer(PSS) to improve transient and dynamic stabilities of a power system. This design technique is basically accomplished in frequency domain. The most important feature of QFT is that it is able to deal with the design problem of complicated uncertain plants. A basic idea in QFT design is the translation of closed-loop frequency-domain specifications into Nichols chart domains specifying the allowable range of the nominal open-loop response and then to design a controller by using the gain-phase loop shaping technique. This paper introduces a new algorithm to compute QFT bounds more efficiently. The propose QFT design method ensures a satisfactory performance of the PSS under a wide range of power system operating conditions.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.217-224
• /
• 1998

A cost model, controlling multiple dependent subprocesses with minimum cost, is derived by renewal theory approach. The optimal multiple cause-selecting control chart and individual Y control chart are thus constructed to monitor the specific product quality and overall product quality contributed by the multiple dependent subprocesses. They may be used to maintain the process with minimum cost and effectively distinguish which component of the subprocesses is out of control. The optimal design parameters of the proposed control charts can be determined by minimizing the cost model using simple grid search method, An example is given to illustrate the application of the optimal multiple cause-selecting control chart and individual Y control chart.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.185-192
• /
• 2004

The goal of this paper is to determine the accurate effective length factor(K factor) for buckling design of plane frames and to point out the practical limitations of the alignment chart which provides the approximate effective length factor. At present, the most general method to obtain K factors is to use the alignment chart which is given in the form of nomograph in LRFD-AISC specification commentaries. However it should be realized that various simplifications and assumptions were used in obtaining the alignment chart. Therefore, a simple but effective method to obtain accurate K-factors through the stability analysis of plane frames is developed in this study. To demonstrate the accuracy and effectiveness of the present scheme, K-factors by system buckling analysis of frames are calculated and compared with those calculated by the alignment chart.

• Management Science and Financial Engineering
• /
• 제6권1호
• /
• pp.1-19
• /
• 2000

This papeer proposes a general approach of the multivariate expontially weighted moving average(MEWMA) chart, in which the smoothing matrix has full elements instead of only diagonal elements. The average run length (ARL) properties of this scheme are examined for a diverse set of quality control environments and the information to design the chhart is provied. Performance of the scheme is measured by estmating ARL and compared to those of two group cumulative sum (CUSUM) chats. The comparison resullts show that the MEWMA chart can improve its ARL performance in detecting a small shifts out-of-control in the start-up stage, the general MEWMA chart of a full smoothing matrix appears to offer an exceptional protection aginst departures from control in the process mean.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.353-357
• /
• 2000

A dimensioning system in a manufacturing process is often complex, especially when a lot of operations are involved in the process. Determination of operational dimensions and tolerances becomes even more complicated if there exist inconsistencies between operational and design relationships among operational dimensions in machining. This chart furnishes a record of the relationships in an easy-to-grasp form, proves that sufficient stock for a cut is available even under adverse conditions, and also proves that separate operations, when taken together, will harmonize as desired. In this paper, various existing roles of the chart have been extended to an operational routing sheet by generating it automatically, providing machining conditions, and verifying operational tolerances.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1999년도 가을 학술발표논문집 Vol.26 No.2 (3)
• /
• pp.54-56
• /
• 1999

현재 많은 내장형 시스템을 구현하기 위한 방법론으로 가상 프로토타입(VP)을 이용하고 있다. 본 논문에서는 가상 프로토타입을 이용하여 내장형 시스템의 설계 및 구현을 위해 사용되는 시스템 명세 언어인 SpecCharts로 명세된 시스템을 동기적 의미론에 만족하는 SpecCharts의 Subset을 규명하여 동기화 형태로 해당명세를 변환시키고 이로부터 synchronous VHDL 코드로 생성할 수 있는 방법을 설계하였다. 동기적 의미론을 만족시키기 위하여 비결정적인 추상적인 모델(NDAM)을 이용하여 SpecCharts로부터 VHDL ？로 변환하는 방법을 제시하고, 변환된 VHDL 코드를 동기적 VHDL 코드로 변환하기 위하여 W. Baker에 의해 규명된 동기적 VHDL subset 적용하여 synchronous VHDL 코드를 생성하는 방법을 제안한다.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.156-165
• /
• 2000

This paper describes modeling and simulation of automotive forward collision warning and avoidance system using CASE(Computer-Aided Systems Engineering) tool. The system is composed or many sensors, a controller, warning devices, brakes and etc. The system was modeled by one activity chart, fourteen state charts and one module chart. Rear-end collision scenarios was generated by Simulink and used to support Stalemate model. The resulting model was used to evaluate the correctness of function and behavior of the system. A simulator for the system has been designed and used to validate the model under realistic operating conditions in the laboratory. To model and simulate the system's functionality and behavior brings clarity to system design early in the system development.

• 응용통계연구
• /
• 제20권3호
• /
• pp.597-604
• /
• 2007

현대 사회에서 건강관리와 공중보건 분야의 이상원인 탐지와 감시를 위하여 관리도 기법을 많이 사용하고 있다 예를 들어, 외과의사의 수술 수행성과의 변화나 만성병과 전염병 등의 비율 변화를 탐지하는데 관리도를 사용할 수 있다. 이 논문에서는 건강관리와 공중보건 분야에서 많이 사용하는 VLAD (variable life-adjusted display) 관리도를 소개하고, 이 관리도에서 관리한계선을 설정하는 방법을 제안하였다.

• 통합자연과학논문집
• /
• 제14권3호
• /
• pp.116-122
• /
• 2021

Properties and comparison of multivariate CUSUM and EWMA charts for monitoring Σ of multivariate normal N(${\underline{\mu}}$, Σ) process has considered. Comparison of the performances of the considered charts, the numerical values are obtained by simulation with 10,000 iteration in terms of ATS, ANSS and ANSW. We found that EWMA chart with small values of smoothing constant more effectively detects the process changes than with large smoothing constant. And we also found that CUSUM chart with small value of reference value is more effectively detecting the process change than with large reference value. If a process engineer has interest in detecting small amount of shift rather than large shift, he/she can be recommended to use small smoothing constant in EWMA chart and small reference value in CUSUM chart.