• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.596-599
• /
• 1989

Vector control has been widely used in AC machines for precise control. The application of Vector control for the permanent magnet synchronous motor drive and complete modeling,simulation and analysis of the drive are discussed in this paper. The nonlinear model of the permanent magnet synchronous motor is linearized. Then the theory of vector control is applied to the linearized model in designing controllers. The operation and relevant mathematics model of s pseudo derivative feedback controller are then presented. Two different speed controller design are then considered. A comparative evalation of the two speed controller is also presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.6
• /
• pp.608-611
• /
• 2012

This paper focuses on attitude stabilization performance improvement of the quadrotor flying robot. First, the dynamic model of quadrotor flying robot was estimated through PEM (Prediction Error Method) using experimental input/output data. And attitude stabilization performance was improved by increasing the generation frequency of PWM signal from 50 Hz to 500 Hz. Also, the controller is implemented using a standard PID (Proportional-Integral-Derivative) controller augmented with feedback on angular acceleration, allowed the gains to be significantly increased, yielding higher bandwidth. Improved attitude stabilization performance is verified by experiment.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.249-250
• /
• 2006

In this paper, hardware design and implementation of digital controller for the High Precision Digital Power Supply (HPDPS) based on Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA) is presented. Developed digital controller is composed of high resolution Digital Pulse Width Modulation (DPWM) and high resolution analog to digital converter circuit with anti-aliasing filter. And Digital Signal Processor (DSP) has the capability of a few micro-second calculation time for one feedback loop. 32-bit DSP and DPWM with 150[ps] step resolution is used to implement the HPDPS. Also 18-bit 2 mega sample per second ADC board is adopted for the developed digital controller. Also, hardware structure of the developed digital controller and experimental results of the first prototype board for HPDPS is described.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.441-446
• /
• 1992

We propose a control architecture for the fuzzy logic control of robot manipulators and a rule base derivation method for a fuzzy logic controller(FLC) using a neural network. The control architecture is composed of FLC and PD(positional Derivative) controller. And a neural network is designed in consideration of the FLC's structure. After the training is finished by BP(Back Propagation) and FEL(Feedback Error Learning) method, the rule base is derived from the neural network and is reduced through two stages - smoothing, logical reduction. Also, we show the performance of the control architecture through the simulation to verify the effectiveness of our proposed method.

• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.44-51
• /
• 1999

In this paper we proposed an output voltage regulation scheme of a single-phase PWM inverter used to obtain a 400 Hz sinusoidal AC voltage for an aircraft. The fuzzy-inference control scheme is designed to achieve good output voltage tracking in the presence of load change or parameter variations. The PWM gate signals are determined by the fuzzy-inference controller using the error between the reference voltage and the feedback voltage and the derivative of error. The tracking performance of.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.3
• /
• pp.186-193
• /
• 1988

A pointwise PD-optimal control method is proposed for the continuous path control of robot manipulators with bounded inputs. The controller employs the desired acceleration plus PD (proportional and derivative) actions in the Cartesian space. The gain parameters of the controller are adjusted so that the Euclidean norm of the deviation between the actual and desired accelerations is minimized subject to the constraints of bounded input torques and the system guarantees negative feedback. To show the Validities of the proposed mithods, computer simulations are performed for a SCARA type robot.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.134-139
• /
• 2007

A delivery ship is used to handle the cargo with the crane to/from the ships. The ship is inclined in the direction of a cargo which is hung on a crane. In this case, a arc shaped rail should be in the equilibrium state to get good anti-rolling performance. In this study, a device and control algorithm are developed to take accurate and quick equilibrium of the rail. The device is composed of a hinged immovable support, screw jack and damper. And the control system is based on I-PD control law to consider of control input saturation and overshoot. The controller is composed of integral controller of feedforward path and proportional-derivative controller of feedback path. The parameters of controller is designed to follow the reference signal and to remove overshoot. The simulation results show that the desirable control performance is achieved.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.217-236
• /
• 1999

Engineering process control (EPC) is one of the techniques very widely used in process. EPC is based on control theory which aims at keeping the process on target. Statistical process control (SPC), also known as statistical process monitoring. The main purpose of SPC is to look for assignable causes (variability) in the process data. The combined SPC/EPC scheme is gaining recognition in the process industries where the process frequently experiences a drifting mean. This paper aims to study the difference between SPC and EPC in simple terms and presents a case study that demonstrates successful integration of SPC and EPC for a product in drifting industry. Statistical process control (SPC) monitoring of the special causes of a process, along with engineering feedback control such as proportional-integral-derivative (PID) control, is a major tool for on-line quality improvement.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.5-5
• /
• 1998

가스터빈 엔진은 민간 항공분야와 방위 무기의 발달과 더불어 성능이 향상되어 왔고, 그 역할도 증대하였다. 성능 향상과 역할 증대에 따라 처리하여야 할 일의 양과 그 속도가 증가하게 되면서 엔진 제어 난이도도 증가하고 제어기법도 향상되고 있다. 이에, 전자공학의 발달에 힘입어 전자식 엔진 제어기가 엔진제어의 임무를 수행하게 되었고, 근래에는 기체의 무게감소와 신뢰성 향상이라는 이중 이익을 위해 FADEC(Full Authority Digital Engine Controller)엔진 제어기까지 등장, 사용되고 있다. 가스터빈 엔진의 제어는 일반적으로 비선형 시스템에 관한 모델링 단계와 성능 해석결과를 이용한 보상기 설계 및 제어 단계의 3부분으로 크게 분류된다. FADEC이란 개념이 정착되기 이전에는 통상적인 제어 법칙인 PID(Proportional Integral Derivative) 방법이 사용되었으나, 시스템의 복잡화와 다변화에 의하여 modern control 개념이 고려된 새로운 제어 방법이 사용되기 시작하였다. 본 논문에서는 엔진 제어에 실제적으로 이용할 수 있는 제안된 제어 법칙을 이용하여 실제 엔진 모델에 적용하여 시뮬레이션 함으로써 새로운 제어 법칙이 엔진 제어에 적용 가능함을 보이고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.129-137
• /
• 2016

In the present study we verified performance of feed-forward control algorithm using short term prediction of ship motion information by taking advantage of developed numerical simulation model of FPSO motion. Up until now, various studies have been conducted about thrust control and allocation for dynamic positioning systems maintaining positions of ships or marine structures in diverse sea environmental conditions. In the existing studies, however, the dynamic positioning systems consist of only feedback control gains using a motion of vessel derived from environmental loads such as current, wind and wave. This study addresses dynamic positioning systems which have feedforward control gain derived from forecasted value of a motion of vessel occurred by current, wind and wave force. In this study, the future motion of vessel is forecasted via Brown's Exponential Smoothing after calculating the vessel motion via a selected mathematical model, and the control force for maintaining the position and heading angle of a vessel is decided by the feedback controller and the feedforward controller using PID theory and forecasted vessel motion respectively. For the allocation of thrusts, the Lagrange Multiplier Method is exploited. By constructing a simulation code for a dynamic positioning system of FPSO, the performance of feedforward control system which has feedback controller and feedforward controller was assessed. According to the result of this study, in case of using feedforward control system, it shows smaller maximum thrust power than using conventional feedback control system.