• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.709-713
• /
• 2004

Characteristics of laser-assisted wet etching of titanium in phosphoric acid were investigated to examine the feasibility of this method for fabrication of high aspect ratio microchannels. Laser power, number of scans, etchant concentration, position of beam waist and scanning speed were taken into consideration as the major process parameters exerting the temperature distribution and the cross sectional profile of etched channels. Experimental results indicated that laser power influences on both etch width and depth while number of scans and scanning speed mainly affect on the etch depth. At a low etchant concentration, the cross sectional profile of an etched channel becomes a U-shape but it gradually turns into a V-shape as the concentration increases. On the other hand, surface of the laser beam focus with respect to the sample surface is found to be a key factor determining the bubble dynamics and thus the process stability. It is demonstrated that metallic microchannels with different cross sectional profiles can be fabricated by properly controlling the process parameters. Microchannels of aspect ratio up to 8 with the width and depth ranges of 8∼32 m and 50∼300 m, respectively, were fabricated.

• Journal of dental hygiene science
• /
• v.23 no.4
• /
• pp.389-395
• /
• 2023

Background: Dental caries prevention is a key research focus in dentistry, requiring advancements in the formulation of dental sealants. This study investigated the physical and antibacterial attributes of dental sealant enriched with phytoncide. Methods: Phytoncide was mixed with a commercially available dental sealant (Clinpro) at concentrations of 0 (control), 1.5%, 3%, and 4.5% by weight (wt%). The flexural strength, curing depth, and wettability of the dental sealant were measured. Antibacterial properties against Streptococcus mutans were evaluated through the enumeration of colony-forming units. Statistical analyses employed one-way variance analysis followed by Tukey's test (p<0.05). Results: The dental sealant containing 3% phytoncide showed no significant difference in flexural strength and curing depth compared with that in the control group (p>0.05). The flexural strength and curing depth decreased with increasing phytoncide content and significantly differed in sealant containing 4.5 wt% phytoncide (p<0.05). Wettability did not differ between the experimental and control groups (p>0.05). The antibacterial properties of the sealant containing 1.5% phytoncide were the same as those of the control group (p>0.05). The bacterial viability was significantly reduced in groups containing 3% and 4.5% phytoncide compared with that in the control group (p<0.05). Conclusion: Dental sealants incorporating phytoncide have a promising potential as antibacterial dental materials.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.353-362
• /
• 2007

In this paper, we propose a novel unsupervised video object extraction algorithm for individual images or image sequences with low depth of field (DOF). Low DOF is a popular photographic technique which enables the representation of the photographer's intention by giving a clear focus only on an object of interest (OOI). We first describe a fast and efficient scheme for extracting OOIs from individual low-DOF images and then extend it to deal with image sequences with low DOF in the next part. The basic algorithm unfolds into three modules. In the first module, a higher-order statistics map, which represents the spatial distribution of the high-frequency components, is obtained from an input low-DOF image. The second module locates the block-based OOI for further processing. Using the block-based OOI, the final OOI is obtained with pixel-level accuracy. We also present an algorithm to extend the extraction scheme to image sequences with low DOF. The proposed system does not require any user assistance to determine the initial OOI. This is possible due to the use of low-DOF images. The experimental results indicate that the proposed algorithm can serve as an effective tool for applications, such as 2D to 3D and photo-realistic video scene generation.

• Journal of Engineering Education Research
• /
• v.18 no.1
• /
• pp.54-60
• /
• 2015

The purposes of the study are to investigate the effects on academic of the self-directed learning and in-depth interviewing program in engineering underachieved students. 17 students participated in program and the grade points average(GPA) of participants are less than 2.5. First, we focus on the change of academic achievement after the self-directed learning and in-depth interviewing program. According to results, it is very effective not only in improving academic achievement of the participation subject but also in increasing GPA. Second, the pre-survey and the post-survey were conducted to the participants. We found some facts from the difference between the pre and post surveys. The expectation and satisfaction about learning have improved after self-directed learning, and the participants' recognition showed the meaningful change in important factors about learning.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.129-135
• /
• 2011

In this paper, we propose the algorithm using optical flow and machine learning-based segmentation for the 3D conversion of 2D video. For the segmentation allowing the successful 3D conversion, we design a new energy function, where color/texture features are included through machine learning method and the optical flow is also introduced in order to focus on the regions with the motion. The depth map are then calculated according to the optical flow of segmented regions, and left/right images for the 3D conversion are produced. Experiment on various video shows that the proposed method yields the reliable segmentation result and depth map for the 3D conversion of 2D video.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.255-260
• /
• 1993

This study proposed a new autofocusing method for a high resolution microscope with a depth of focus of a submicron range. The experimental setup was characterized by nulling method for bi-cell prhotodiode which had two active areas on sensor surface. The optical systems used in this method had was very simple and was easily matched to microscopes which had used widely. It was shown that the resolution was very high (about 20 nm) by experimental results. This method can be used in the semiconduct industry because it can find defects on the silcon wafer.

• International Journal of High-Rise Buildings
• /
• v.12 no.1
• /
• pp.75-82
• /
• 2023

By limiting population and land resources, a high-density urban form has become the inevitable choice for central cities in the rapid growth of many large cities in China. Due to the shift in urban growth and focus, high-density urban areas require restoration and improvement. This study intends to combine ancient and new districts, establish strategies for enhancing urban function, spatial utility, industry, and transportation, and thus enhance regional holistic effectiveness, by performing in-depth research.

• The Research Journal of the Costume Culture
• /
• v.18 no.6
• /
• pp.1242-1253
• /
• 2010

The purpose of this study is to suggest a designing method with excellent body suitability by analyzing clothingwearing porosity, comparing and analyzing patterns, and evaluating outer appearances by designing a prototype of study applied with design measurements for categories that have influence on the outer appearance of clothing through diverse research methods, by comparing and analyzing bunka and new bunka style basic pattern, which are proportional basic patterns most frequently used in schools for educational use to design bodice pattern for elderly women in their late 60s. As for the process of this study, the first stage selected study subjects, measured bodies. The second stage compared patterns of bunka and new bunka style basic pattern and evaluated outer appearances that deduced important pattern designing categories to design upper-torso bodice pattern of elderly women. The results of this study are as following ; As a result of comparing and analyzing bunka and new bunka style basic pattern, overall evaluation of outer appearance was excellent for new bunka style basic pattern, and bunka basic pattern received better reviews for the width and depth of front neck. In terms of waist circumference, waist front length, bust point location and bust point-bust point, bunka and new bunka style basic patterns showed a significant difference. new bunka style basic pattern had 4.5cm larger front armhole depth than bunka basic pattern, so it was evaluated to have more appropriate front armhole length, bust point location, and bust point-bust point. Through observation for primary excellent categories and precedent studies, 7 categories of front neck width, front neck depth, front interscye, back neck width, back neck depth, back interscye, and back armhole depth were deduced to have relations to the extra room around arm holes and waist that affect pattern designing method and porosity and evaluations of outer appearance.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.88-98
• /
• 1997

Welding defects, such as porosity and spike, have sometimes occurred in deep penetration electron beam welds. These defects are known to be one of the serious problem in electron beam welds. So, effects of active parameters ($a_b$) on bead shape and occurrence of defects in electron beam welds of heavy section 9%Ni steel plates were investigated. Partial penetration welding in flat position, and deep penetration welding of 10 ~ 28mm depth were investigated in this study. It is desirable to select low accelerating voltage and above the surface focus position $a_b$$\geq$1.2 at which a wine-cup shaped bead is obtained to avoid the welding defects such as spike and root porosity. When the accelerating voltage of electron beam was low (90kV), active parameter ($a_b$) did not influence on the bead width, penetration depth and weld defects significantly. However, in case of high voltage ($\geq$120kV), active parameter ($a_b$) was sensitively associated with penetraton depth and weld defects, i.e. when the active parameter (($a_b$) was in the range of 0.6 to 1.0, the depth of penetration was always over the target (23mm), while the depth of penetration was dramatically decreased with further increase of active parameter ($a_b$). The weld defects were decreased with the increase of active parameter $a_b$ resulting in the decrease of energy density of the focused beam in the root part of fusion zone.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.85-92
• /
• 2023

In this paper, we propose a method for automatically generating story-based abbreviated summaries from long-form dramas and movies. From the shooting stage, the basic premise was to compose a frame with illusion of depth considering the golden division as well as focus on the object of interest to focus the viewer's attention in terms of content delivery. To consider how to extract the appropriate frames for this purpose, we utilized elemental techniques that have been utilized in previous work on scene and shot detection, as well as work on identifying focus-related blur. After converting the videos shared on YouTube to frame-by-frame, we divided them into a entire frame and three partial regions for feature extraction, and calculated the results of applying Laplacian operator and FFT to each region to choose the FFT with relative consistency and robustness. By comparing the calculated values for the entire frame with the calculated values for the three regions, the target frames were selected based on the condition that relatively sharp regions could be identified. Based on the selected results, the final frames were extracted by combining the results of an offline change point detection method to ensure the continuity of the frames within the shot, and an edit decision list was constructed to produce an abbreviated summary of 62.77% of the footage with F1-Score of 75.9%