• 터널과지하공간
• /
• 제17권4호
• /
• pp.311-321
• /
• 2007

경암 내 암반구조물의 파괴는 현지응력의 크기, 무결암의 강도 그리고 암반 내에 존재하는 불연속면의 상태에 의해 결정되며, 특히 높은 현지응력이 작용하는 경우 유도응력에 의해 취성파괴가 발생할 수 있다. 취성 파괴의 특성은 파괴수준, 파괴개시시점, 파괴범위와 파괴심도 등으로 구분할 수 있으며, 암반구조물의 안정성을 확보하기 위해서는 응력조건에 따른 취성파괴의 특성을 규명하여야 한다. 본 연구에서는 취성파괴가 발생한 상태에서 응력조건에 따른 파괴범위와 파괴심도를 평가하고자 하였다. 이를 위해 진삼축 압축응력조건에서 모형실험을 수행하였으며, 취성파괴가 발생한 모형실험체에 대하여 육안관찰과 컴퓨터단층촬영을 수행하여 파괴심도와 파괴범위를 결정하였다. 파괴심도는 터널단면에 작용하는 축차응력의 크기에 영향을 받으나 파괴범위의 경우 응력조건에 따른 뚜렷한 경향성을 보이지 않는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.51-59
• /
• 2020

In this paper, the WEKA platform was used to mine and analyze measured data of floor failure depth and a prediction system of floor failure depth was developed with Java. Based on the standardization and discretization of 35-set measured data of floor failure depth in China, the grey correlation degree analysis on five factors affecting the floor failure depth was carried out. The correlation order from big to small is: mining depth, working face length, floor failure resistance, mining thickness, dip angle of coal seams. Naive Bayes model, neural network model and decision tree model were used for learning and training, and the accuracy of the confusion matrix, detailed accuracy and node error rate were analyzed. Finally, artificial neural network was concluded to be the optimal model. Based on Java language, a prediction system of floor failure depth was developed. With the easy operation in the system, the prediction from measured data and error analyses were performed for nine sets of data. The results show that the WEKA prediction formula has the smallest relative error and the best prediction effect. Besides, the applicability of WEKA prediction formula was analyzed. The results show that WEKA prediction has a better applicability under the coal seam mining depth of 110 m~550 m, dip angle of coal seams of 0°~15° and working face length of 30 m~135 m.

• 한국지반공학회논문집
• /
• 제30권6호
• /
• pp.41-49
• /
• 2014

집중강우 시에는 사면의 얕은 심도에서 파괴가 빈번하게 발생한다. 사면의 표층 지반은 심도에 따라서 조밀해지는 특성이 있으며 지반의 투수특성과 강도특성도 달라지므로 강우시 사면의 얕은 심도에서 발생하는 파괴의 원인분석과 안정해석은 이러한 지반특성 변화를 고려할 필요가 있다. 본 연구에서는 사면의 표층 부근의 지반특성 변화가 강우시 사면의 안정성에 미치는 영향을 수치해석적으로 분석해 보고자 하였으며, 표층 근처에서 심도에 따라 구한 지반특성 값을 적용하는 방식에 따라 강우침투와 사면안정해석 결과의 차이를 비교해 보았다. 실제 강우시 파괴가 발생한 사면을 대상으로 사면의 표층에서 심도별로 시료를 채취하여 전단강도와 투수특성 등 지반특성을 구하였으며, 파괴를 유발한 강우기록을 적용하여 침투해석과 안정해석을 실시하였다. 해석결과 깊이별 지반의 특성 변화를 고려한 경우와 단일지층으로 가정하여 고려하는 방식에 따라 간극수압 분포, 예상파괴면, 안전율 변화에 차이가 있는 것으로 나타났으며, 깊이별 지반 특성 변화를 고려하는 경우가 실제 파괴거동과 유사한 결과를 나타내었다. 이러한 결과는 강우침투에 의한 표층파괴현상을 규명하고자 하는 경우 지반의 심도별 지반특성 변화를 고려할 필요가 있음을 의미한다.

• Journal of Welding and Joining
• /
• 제28권6호
• /
• pp.45-50
• /
• 2010

Most of joining processes for machine and steel structure are performed by butt and fillet welding. The mechanical properties and fatigue strength of their welding zone can be effected largely by the differential of generated heat and changes of grain size according to thickness of material and number of passes in welding process. In this study, it was investigated about characteristics of fatigue failure according to thickness of material and number of passes in cruciform fillet weld zone as the basic study for safe and economic design of welding structures. Fracture modes in cruciform fillet weld zone are classified into toe failure and root failure according to non-penetrated depth. It can be accomplished economic design of welding structures considering fatigue strength when the penetrated depth in fillet weld zone is controled properly.

• Journal of Welding and Joining
• /
• 제29권4호
• /
• pp.67-72
• /
• 2011

The proportion of the welding in the production process of machinery, buildings and marine structures is increasing and the joining are mainly conducted by butt and fillet weld. In the case of fillet weld, the shape of structures is complicated depending on the constraint on the geometry of the structures, therefore, the full penetration is mostly difficult. Accordingly, it is necessary to establish safe and economical criteria of design of the structures through the strength based on the penetration state of the fillet weld. Patterns of fatigue failure in cruciform fillet weld jont appear in the form of the root, toe and mixed failure. In the case of toe and mixed failure, the fatigue strength is higher than root failure. Therefore, we have to make the enough depth of penetration or perform the welding work through improving the fatigue strength of cruciform joints in welded structures. So it is necessary to optimize the penetrated depth in the range of the possible mixed failure and find the way in the cost-effective design to lessen the amount of the welding work.

• Geomechanics and Engineering
• /
• 제31권4호
• /
• pp.375-384
• /
• 2022

The variation of the undrained shear strength (c_u) is an important consideration for assessing slope stability in engineering practice. Previous studies focused on the three-dimensional (3D) stability of slopes in normally consolidated clays generally assume the undrained shear strength increases linearly with depth but does not vary in the horizontal direction. To assess the 3D stability of slopes with spatially varying undrained shear strength, the kinematic approach of limit analysis was adopted to obtain the upper bound solution to the stability number based on a modified failure mechanism. Three types failure mechanism: the toe failure, face failure and below-toe failure were considered. A serious of charts was then presented to illustrate the effect of key parameters on the slope stability and failure geometry. It was found that the stability and failure geometry of slopes are significantly influenced by the gradient of c_u in the depth direction. The influence of c_u profile inclination on the slope stability was found to be pronounced when the increasing gradient of c_u in the depth direction is large. Slopes with larger width-to-height ratio B/H are more sensitive to the variation of c_u profile inclination.

• 대한토목학회논문집
• /
• 제34권2호
• /
• pp.367-375
• /
• 2014

최근 콘크리트 구조물의 보수 보강 및 리모델링 시 구조부재를 부착시키거나 고정하는데 있어서 시공의 유연성 및 용이성으로 후설치 앵커의 사용량이 증가하고 있는 실정이다. 전단하중을 받는 앵커는 강재와 콘크리트의 강도, 연단거리, 앵커간격 등에 따라 다양한 파괴모드를 보이며 대표적인 파괴모드는 강재 파괴, 콘크리트 파열 파괴, 콘크리트 프라이 아웃 파괴 등으로 나타난다. 본 연구에서는 매입깊이, 앵커간격, 연단거리 및 콘크리트 강도를 변수로 한 세트앵커의 전단 실험을 통하여 콘크리트에 매입된 후설치 앵커의 전단 파괴거동에 미치는 영향을 규명하는 것을 그 목적으로 한다. 매입깊이 변수의 실험 결과 매입깊이가 얕을수록 콘크리트 강도의 영향이 큰 것으로 나타났다. 앵커간격 변수의 실험 결과 모두 강재 파괴가 발생하였으며, 연단거리 변수의 실험 결과 매입깊이 이하인 경우 모두 콘크리트 파괴가 발생하였다. 동일한 변수의 실험 결과를 비교해 보았을 때 콘크리트 강도가 클수록 변위가 상대적으로 더 작게 나타났다.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.977-995
• /
• 2017

It is well accepted that rock failure mechanism influence the cutting efficiency and determination of optimum cutting parameters. In this paper, an attempt was made to research the factors that affect the failure mechanism based on discrete element method (DEM). The influences of cutting depth, hydrostatic pressure, cutting velocity, back rake angle and joint set on failure mechanism in rock-cutting are researched by PFC2D. The results show that: the ductile failure occurs at shallow cutting depths, the brittle failure occurs as the depth of cut increases beyond a threshold value. The mean cutting forces have a linear related to the cutting depth if the cutting action is dominated by the ductile mode, however, the mean cutting forces are deviate from the linear relationship while the cutting action is dominated by the brittle mode. The failure mechanism changes from brittle mode with larger chips under atmospheric conditions, to ductile mode with crushed chips under hydrostatic conditions. As the cutting velocity increases, a grow number of micro-cracks are initiated around the cutter and the volume of the chipped fragmentation is decreasing correspondingly. The crack initiates and propagates parallel to the free surface with a smaller rake angle, but with the rake angle increases, the direction of crack initiation and propagation is changed to towards the intact rock. The existence of joint set have significant influence on crack initiation and propagation, it makes the crack prone to propagate along the joint.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.201-206
• /
• 2020

A stress-induced brittle failure in deep tunneling generates spalling and slabbing, eventually causing a v-shaped notch formation. An empirical relationship for the depth of the notch to the maximum tangential stress assuming an equivalent circular cross-section was proposed (Martin et al. 1999). While this empirical approach has been well recognized in the industry and used as a design guideline in many projects, its applicability to a non-circular opening is worth revisiting due to the use of equivalent circular profile. Moreover, even though the extent of the notch also contributes to notch failure, it has not been estimated to date. When the estimate of both the depth and the extent of notch are combined, a practical and economically justifiable support design can be achieved. In this study, a new methodology to assess the depth as well as the extent of notch failure is developed. Field data and numerical simulations using the Cohesion Weakening Frictional Strengthening (CWFS) model were collected and correlated with the three most commonly accepted failure criteria (σ₁/σ₃, D_is=σ_max/σ_c, σ_dev/σ_cm). For the numerical analyses, the D-shaped tunnel was used since most civil tunnels are built to this profile. Inferential statistical analysis is applied to predict the failure range with a 95% confidence level. Considering its accuracy and simplicity, the new correlation can be used as an enhanced version of failure assessment.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.55-63
• /
• 2015

콘크리트용 후설치 세트앵커는 콘크리트가 경화된 후에 설치되는 앵커이며 시공 장비의 발달과 시공의 유연성 및 용이성으로 사용량이 증가하고 있는 실정이다. 전단하중을 받는 앵커는 강재 파괴, 콘크리트 파열파괴, 콘크리트 프라이아웃 파괴 등의 대표적인 파괴모드를 보인다. 본 연구에서는 매입깊이, 연단거리 및 콘크리트 강도를 변수로 한 세트앵커의 실험 및 유한요소 해석 결과를 통하여 콘크리트에 매입된 저하중용 후설치 세트앵커의 전단 파괴거동에 미치는 영향을 규명하는 것을 그 목적으로 한다. 매입깊이 변수의 실험 결과 매입깊이가 얕을수록 콘크리트 강도의 영향이 큰 것으로 나타났다. 연단거리 변수의 실험 결과 동일한 파괴모드를 보이면서 콘크리트 강도의 영향이 크지 않은 것으로 나타났다. 강재 파괴가 발생한 실험 결과를 비교해 보았을 때 콘크리트 강도가 클수록 변위가 상대적으로 더 작게 나타났다.