• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.345-352
• /
• 2019

This study aims to analyze the factors affecting the length of stay in elderly pediatric inpatients in traffic accidents. We used Korean National Hospital Discharge In-depth Injury data on the discharged from 2012 to 2016. Statistically significant factors affecting the length of stay are admission route, Charlson Comorbidity Index(CCI), injury parts, operation, results, hospital area, and beds for hospitals. The length of stay was shorter in the case of the admission route of the outpatient department than the emergency room, the results were not improved or death rather than improved, and the bed size was 500-999 beds or over 1000 beds rather than 100-299 beds. However, the length of stay was longer in the case of CCI score was 1-2 or over 3 rather than 0, injury parts were other parts rather than head/neck, when the operation was yes, and when the hospital area was a province, metropolitan rather than Seoul. This study intends to understand the medical characteristics of inpatient to prevent pedestrian traffic accidents in accordance with the population aging. Based on this finding, we wish to be used as the basic data for the establishment of policies to effectively manage traffic safety and medical resources in consideration of the characteristics of the elderly people.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.222-227
• /
• 2008

In this study, $BaTiO_3$ thin films were grown by RF-magnetron sputtering, and the effects of a post-annealing process on the structural characteristics of the $BaTiO_3$ thin films were investigated. For the crystallization of the grown thin films, post-annealing was carried out in air at an annealing temperature that varied from $500-1000^{\circ}C$. XRD results showed that the highest crystal quality was obtained from the samples annealed at $600-700^{\circ}C$. From the SEM analysis, no crystal grains were observed after annealing at temperatures ranging from 500 to $600^{\circ}C$; and 80 nm grains were obtained at $700^{\circ}C$. The surface roughness of the $BaTiO_3$ thin films from AFM measurements and the crystal quality from Raman analysis also showed that the optimum annealing temperature was $700^{\circ}C$. XPS results demonstrated that the binding energy of each element of the thin-film-type $BaTiO_3$ in this study shifted with the annealing temperature. Additionally, a Ti-rich phenomenon was observed for samples annealed at $1000^{\circ}C$. Depth-profiling analysis through a GDS (glow discharge spectrometer) showed that a stoichiometric composition could be obtained when the annealing temperature was in the range of 500 to $700^{\circ}C$. All of the results obtained in this study clearly demonstrate that an annealing temperature of $700^{\circ}C$ results in optimal structural properties of $BaTiO_3$ thin films in terms of their crystal quality, surface roughness, and composition.

• Journal of Korea Water Resources Association
• /
• v.38 no.8 s.157
• /
• pp.617-629
• /
• 2005

In this paper, a hypothesis is tested that division of non-monotonic time series into monotonic parts will improve the estimation of trends through increased homogeneity in direction of time-variation using LOWESS smoothing and seasonal Kendall test. From the trend analysis of generated time series and water temperature, discharge, air temperature and solar radiation of Lake Daechung, it is shown that the hypothesis is supported by improved estimation of trends and slopes. Also, characteristics in homogeneity variation of seasonal changes seems to be more clearly manifested as homogeneity in direction of time-variation is increased. And this will help understand the effects of human intervention on natural processes and seems to warrant more in-depth study on this subject. The proposed method can be used for trend analysis to detect monotonic trends and it is expected to improve understanding of long-term changes in natural environment.

• Korean Journal of Ecology and Environment
• /
• v.42 no.1
• /
• pp.58-66
• /
• 2009

The telemetry of eight adult manchurian trouts (Brachymystax lenok tsinlingensis) in the upper part of the Nakdong River, which is the southern limit of distribution of manchurian trout on the Korean peninsula, was used to examine migration patterns and evaluate characteristics of over-wintering and the spawning season between December, 2007 and May, 2008. Based on the tracking data, the tagged fish showed a limited migration between adjacent pools, moving only up to $8.6m\;day^{-1}$ during the winter season (December to February). Hydraulic conditions of over-wintering pool areas were, ca. 1m depth, slow moving surface water with areas of sand and gravel. The migration of tagged individuals was successful, moving up to $96.2m\;day^{-1}$ during the spawning season. Two tagged individuals (BL4, BL6) exhibited upstream migration, whereas others showed downstream movements. The timing of upstream migration of the two individuals was consistent with an increasing phases of water level and discharge. The fishes migrating toward the down stream moved to the wide pool areas downstream, where they spent the summer season for the growth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.601-610
• /
• 2021

The tidal current patterns at Keum River Estuary before and after the construction of coastal structures were compared according to the CASES. The depth-integrated and tidal difference treatment applied FLOW2DH numerical model was used for the tidal current predictions. The test conditions consisted of before construction of coastal structures (CASE1), after construction of coastal structures (CASE2), and the addition of watergate operation(CASE1Q and CASE2Q), and present (CASE3). CASE1 showed a stable tidal current pattern, such as a natural estuary. In CASE2, the tidal current velocities and directions of the Keum River Estuary were changed due to the installed coastal structures. In particular, the tidal current velocities of the Gaeya open channel sections (P5~P9) in CASE2 were calculated to be 10~30% larger than that of CASE1. In the case of the Gunsan Inner Harbor (P4), which is closest to the Geum River Estuary, the ebb flow rate was approximately 250~300% faster than that of other CASEs due to the discharge of the watergate operation for 2.7 hours during the ebb of CASE1Q and CASE2Q. This will affect sediment transport, and it is predicted to lead to seabed changes. CASE3 is considered to be entering the stabilization stage according to the simulation of the tidal current velocities and directions of the Keum River Estuary and the surrounding coastal area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1753-1764
• /
• 2014

Numerical flow simulation models in the riverine environments have been widely utilized for analyzing flow dynamics in various degrees in researches and practical applications. However, most of the simulated results have been validated based on the data from indoor experimental models or very limited in-situ measurements. Therefore, it has been required to more accurately validate the performance of the numerical models in terms of the detailed field observations. In particular, it was also hard to validate the performances of the existing numerical models in the real meandered river channels that encompass more sophisticated flow and geometric structures. Recently, advancements of the modern flow measuring instrumentations such as acoustic Doppler current profilers (ADCPs) enabled us to efficiently acquire the detailed flow field in the broad range of river channels, thus that it became to be possible to accurately validate any numerical models with the field observations. In this study, based on the detailed flow measurements in a actual meandered river channel using ADCP, we validated FaSTMECH model in iRIC in terms of water surface elevation, which is relatively new but began to get highlighted in the research areas. As the validation site, a meandering channel in River Experiment Center of KICT was chosen, which has 6.5 m of width, 0.38m of flow depth, 1.54 m3/s of flow discharge, 0.61 m/s of mean flow velocity, and 1.2 of sinuosity. As results, whereas the FaSTMECH precisely simulated water surface elevation, simulated velocity field in the bend did not match well with ADCP dataset.

• Korean Journal of Ichthyology
• /
• v.33 no.2
• /
• pp.74-83
• /
• 2021

Distribution status, habitat characteristics, and extinction threat evaluation of the endangered species, Brachymystax lenok tsinlingensis were investigated in 2015 and 2019. Historical distribution reports of B. l. tsinlingensis were divided into before 1990, 1997~2006, 2000~2011, and 2010~2019. Among the 150 sampling sites investigated during the study period, number of individuals of B. l. tsinlingensis were collected 542 individuals from 67 sites. The streams inhabited of B. l. tsinlingensis were Naerincheon (11 stations), Odaecheon (11 stations), Bukcheon (10 stations), Bangtaecheon (8 stations), Songjeongricheon (4 stations), Suipcheon (3 stations), Inbukcheon (3 stations), Hyeondongcheon (3 stations) etc. The main habitat of B. l. tsinlingensis was upstream of the river with a high altitude of more than 400 m, 4~20 m water flow width, 1~2 m water depth, and high ratio (70~80%) boulder bottoms. The main reasons for the decline in population size were assumed as river works, construction of reservoirs and bridges, discharge of contaminated water into the river, the inflow of summer vacationers, and weir. Compared to our results there exists evidence that states a 20.7% reduction in occupancy within 10 years, in a small appearance range (7,732 km²) and occupancy area (268 km²), number of disconnected locations (15 locations), and a decline in habitat quality. Therefore, B. l. tsinlingensis is now considered as Near Threatened (NT) based on the results (Near meets VU A2acd, B1b(i,ii,iii)+B2b(i,ii,iii)) of IUCN Red List categories and criteria.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.452-460
• /
• 2008

Anti-foaming agents and foam fences have been used to remove the foam at the outfall of power plants, but there are some problems as consumption of maintenance costs and insufficiency of effect. Therefore, development of the methods how to remove the foam by stable coastal structure has been required. In this study, numerical simulation of air entrainment was carried out to design the submerged outlet structure for reducing foam using curtain walls. The air entrainment rate and the discharge of entrained air change according to the shape of weir and curtain wall. Hence, it is necessary to design the optimum section through comparison of each case. The optimum section which has the maximum rate of foam reduction was determined by the simulation results. In addition, it was found that the flow velocity at the submerged outlet is to be smaller than 1 m/s and the submerged depth of curtain wall is to be taller than height of the submerged outlet section.

• Journal of agricultural medicine and community health
• /
• v.42 no.4
• /
• pp.226-233
• /
• 2017

Objective: The purpose of this study was to describe and understand self-care status of the aged diabetic patients with noncompliance after hospital discharge. Methods: A qualitative research method was used for the study design. The participants were 15 diabetic patients aged 65 or older who had been admitted more than two times for hyperglycemia in the past 1 year in a general hospital in Daegu. Data were collected from November 1 2015 to March 1 2016 through in-depth personal interview. Results: Patients' knowledge level on causes and symptoms of diabetes was low. Most participants rarely and irregularly checked blood sugar at home. They were under a lot of stress from their family. Due to old age and illness they did not have sufficient physical activity and they have had rarely regular meals. They considered the self-care education program unnecessary and there was limitations of accessibility for education. Conclusions: The aged diabetic patients who had the repeat admission did not perform self-care activities properly and had problems especially in blood glucose check, support from their family, and health education after returning home. More personalized and community-based self-management education programs will be necessary.