• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1423-1429
• /
• 2019

Recently, a system that supports efficient interaction, a human machine interface (HMI), has become a hot topic. In this paper, we propose a new real time low-cost hand gesture control system as one of vehicle interaction methods. In order to reduce computation time, depth information was acquired using a time-of-flight (TOF) camera because it requires a large amount of computation when detecting hand regions using an RGB camera. In addition, fourier descriptor were used to reduce the learning model. Since the Fourier descriptor uses only a small number of points in the whole image, it is possible to miniaturize the learning model. In order to evaluate the performance of the proposed technique, we compared the speeds of desktop and raspberry pi2. Experimental results show that performance difference between small embedded and desktop is not significant. In the gesture recognition experiment, the recognition rate of 95.16% is confirmed.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.173-183
• /
• 2017

In this research, analysis based on VR journalism outlet the New York Times' was carried out. The image analysis of was done through the frames of angle, shot (size, length, movement), and limited user-directed interaction (point, sound). The result of this is as follows. Firstly, the direction was done using a basis of normal and low angles. Secondly, it was able to be confirmed that the shooting was done in order by medium, full, and long shot. Thirdly, with regard to the length of the shot, most direction was done through long takes. Fourthly, most images came to consist of fixed shots. Lastly, this is limited user-directed interaction. This may be separated into 2 aspects: sound, and movement of the independent free agent. Through these, interaction was guided through free point of view concerning realistic situations to point of view guidance and users. This research may be referred to as foundational research for the further advancement of in-depth discussion pertaining to VR journalism.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.7
• /
• pp.29-38
• /
• 2018

Three-dimensional continuum modeling of dynamic soil-pile-structure interaction embedded in a liquefiable sand was carried out. Finn model which can model liquefaction behavior using effective stress method was adopted to simulate development of pore water pressure according to shear deformation of soil directly in real time. Finn model was incorporated into Non-linear elastic, Mohr-Coulomb plastic model. Calibration of proposed modeling method was performed by comparing the results with those of the centrifuge tests performed by Wilson (1998). Excess pore pressure ratio, pile bending moment, pile head displacement-time history according to depth calculated by numerical analysis agreed reasonably well with the test results. Validation of the proposed modeling method was later performed using another test case, and good agreement between the computed and measured values was observed.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.603-617
• /
• 2023

This study aims to provide a better understanding of the turbulent flow characteristics in swash zone. A double dam-break method is employed to generate the swash zone flow. Comparing with the conventional single dam-break method, a delay between two gate opening can be controlled to reproduce various interactions between uprush and backwash. For numerical simulations, overInterDyMFoam based on OpenFOAM is adopted. Using overInterDyMFoam, interface between two immiscible fluids having different densities (i.e., air and water phases) can be tracked in a moving mesh with multiple layers. Two-dimensional Reynolds-Averaged Navier-Stokes equations are solved with a standard 𝜅-𝜖 turbulence model for momentum and continuity. Numerical model results are validated with laboratory experiment data for the time series of water depth and streamwise velocity. Turbulent kinetic energy distribution is further investigated to identify the turbulence evolution for each flow regime (i.e., uprush, backwash, and swash-swash interaction).

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.215-223
• /
• 2012

To examine the interaction of the floating pontoon with a steel moment resisting frame, the static structural analysis is carried out, in which the pressure load are calculated from the forgoing fluid dynamic analysis, varying the period of wave from 3 to 15 second and for 3 cases of depth of pontoon, 1.5, 2.0, 2.5m. As results, it has shown that RAO-pitch has the linear relationship with the increase of moment of the frame and the curvature of pontoon is reversely proportional to the stiffness of pontoon. By synthesizing these results, an estimation method is proposed, which predicts the moment of frame of the different depth of pontoon based on the analysis result of an arbitrary depth of a floating pontoon. The estimation result shows considerably good agreement, compared with the analysis result.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.2
• /
• pp.13-24
• /
• 2023

Tunnels may undergo a larger or a smaller response compared with the free-field soil. In the pseudo-static procedure, the response of the tunnel is most often characterized by a curve that relates the racking ratio (R) with the flexibility ratio (F), where R represents the ratio of the tunnel response with respect to the free-field vibration and F is the relative stiffness of the tunnel and the surrounding soil. A set of analytical and empirical curves that do not account for the depth and the aspect ratio of the tunnel are typically used in practice. In this study, a series of dynamic analyses are conducted to develop a set of F-R_m relations for use in a frame analysis method. R_m is defined as an adjusted R where the rocking mode of deformation is removed and only the racking deformation is extracted. The numerical model is validated against centrifuge test recordings. The influence of aspect ratio, buried depth of tunnel on results is investigated. The results show that R_m increases with the increase of the buried depth and the aspect ratio. The widely used F-R relations are highlighted to be different compared with the obtained results in this study. Therefore, the updated F-R_m relations with proposed equations are recommended to be used in practice design. The rocking response decreases with either the decrease of the difference of stiffness between surrounding soil and tunnel or the larger aspect ratio of the tunnel section.

• Health Policy and Management
• /
• v.28 no.1
• /
• pp.35-47
• /
• 2018

Background: The purpose of this study is to elucidate the context of medical experience and the perception of unmet healthcare of elderly people with chronic diseases based on in-depth interview data. Methods: We carried out in-depth interviews with 10 elderly people with chronic diseases using semi-structured questionnaires based on literature review. The in-depth interview data were analyzed using thematic analysis; one qualitative research methodology, three core meaning categories, and four attributes associated with unmet healthcare were ultimately derived. Results: The context of the medical experience were based on the following three categories: (1) discomfort due to diseases and high medical needs, (2) the poor community medical environment and difficulties in accessing to metropolitan medical institutions, and (3) inconvenience caused by long waiting time and side effects of medicine. In addition, the elderly with chronic disease realized the unmet healthcare as (1) the availability related to the desired medical institutions at the right time, (2) the affordability related to their economic capacity, (3) the effectiveness of the medical services they experienced, and (4) the appropriateness related to receiving medical services in a pleasant environment. Conclusion: The perception of unmet healthcare among the elderly with chronic disease is the result of interaction of multi-level and multi-dimensional factors related with their medical experience.

• Korean Journal of Community Nutrition
• /
• v.25 no.4
• /
• pp.303-316
• /
• 2020

Objectives: The nutritional status of cancer patients undergoing chemotherapy is closely related to the compliance of nutrition education. However, as chemotherapy is conducted repeatedly, compliance with nutrition management is lowered, leading to malnutrition. Malnutrition is related directly to the quality of life after surgery in cancer patients. Therefore, this study examined the factors related to compliance with nutrition management during chemotherapy. Methods: In this study, five subjects with colorectal cancer undergoing adjuvant chemotherapy were interviewed in-depth using the Giorgi study method. The contents of the nutrition education visits and in-depth interviews were transcribed in the language of the subject after recording, and the appropriateness of the data was improved by reflecting the subject's actions and facial expressions. Results: After conducting the in-depth interviews for each subject, the experience of the subject's diet and adjuvant chemotherapy was drawn into two domains, six elements, and 26 sub-elements. In the cognitive domain, the patients experienced physical and psychological changes, and the need for nutrition management was recognized by analyzing the dietary causes of the diseases. In the domain of practice, a knowing-doing gap was formed, unlike the patient's will. Factors that inhibited compliance with nutritional management included digestive problems, sensory changes, loss of appetite, and social interaction stress. Conclusions: Dietary management is very important for patients receiving periodic anticancer therapy, and step-by-step training and personal monitoring based on the chemotherapy order is necessary to maintain the patient's will and social and environmental support.

• Broadcasting and Media Magazine
• /
• v.11 no.4
• /
• pp.118-131
• /
• 2006

With rapid development in ultra fast communication and digital multimedia, the realistic broadcasting technology, that can stimulate five human senses beyond the conventional audio-visual service is emerging as a new generation broadcasting technology. In this paper, we introduce a haptic broadcasting system and related core system and component techniques by which we can 'touch and feel' objects in an audio-visual scene. The system is composed of haptic media acquisition and creation, contents authoring, in the haptic broadcasting, the haptic media can be 3-D geometry, dynamic properties, haptic surface properties, movement, tactile information to enable active touch and manipulation and passive movement following and tactile effects. In the proposed system, active haptic exploration and manipulation of a 3-D mesh, active haptic exploration of depth video, passive kinesthetic interaction, and passive tactile interaction can be provided as potential haptic interaction scenarios and a home shopping, a movie with tactile effects, and conducting education scenarios are produced to show the feasibility of the proposed system.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.393-400
• /
• 2013

Hand shape recognition is a fundamental technique for implementing natural human-computer interaction. In this paper, we discuss a method for effectively detecting a hand region in Kinect-based hand shape recognition. Since Kinect is a camera that can capture color images and infrared images (or depth images) together, both images can be exploited for the process of detecting a hand region. That is, a hand region can be detected by finding pixels having skin colors or by finding pixels having a specific depth. Therefore, after analyzing the performance of each, we need a method of properly combining both to clearly extract the silhouette of hand region. This is because the hand shape recognition rate depends on the fineness of detected silhouette. Finally, through comparison of hand shape recognition rates resulted from different hand region detection methods in general environments, we propose a high-performance hand region detection method.