• 한국압력기기공학회 논문집
• /
• 제16권2호
• /
• pp.10-17
• /
• 2020

Securing the integrity of steam generator tubes is an essential requirement for safe operation of nuclear power plants. Therefore, tubes that do not satisfy integrity requirements are no longer usable and must be repaired according to the related requirements. In general, the repair criterion is that the damage depth is more than 40% of the tube wall thickness. However, the plugging limit can be changed and be applied, provided a technical proof is given that integrity can be secured against specific degradation at a specific plants and that approval can be obtained from a regulatory agency. A typical example is alternative repair criteria for defects within the tube sheet or tube support plates. In this paper, a background of establishing the plugging limit for steam generator tubes and changes in maintenance criteria are reviewed as examples.

• 한국군사과학기술학회지
• /
• 제18권2호
• /
• pp.154-159
• /
• 2015

This paper deals with the effect of concrete target size on penetration of projectiles. We investigated the penetration depth and residual velocity of projectiles using the 2-D axial symmetric model. Most analysis were conducted with 13 kg projectile (striking velocity: 456.4 m/s) and concrete target with compressive strength of 39 MPa. This paper provided penetration depth (or residual velocity) versus ratio D/d (target diameter, D and projectile diameter, d). When the bottom of concrete cylinder was constrained, penetration depth converged to limit depth more than the ratio D/d of 36. The residual velocity of projectile with thin concrete target were investigated. The residual velocity was converged to specific velocity more than the ratio D/d of 16.

• Structural Engineering and Mechanics
• /
• 제18권2호
• /
• pp.263-276
• /
• 2004

The purpose of this paper is to determine the subsoil depth affected from the load on the plate resting on elastic foundation using stress distribution within the subsoil that will be occurred depending on the loading and dimension of the plate. An iterative method is developed in order to determine the effective depth of the subsoil under the plate. Numerical examples from the technical literature are solved by means of the method suggested herein and displacements, bending moments and shear forces are presented in graphical and tabular forms to evaluate the effects of the limit depth considered in the study. Results showed the efficiency and simplicity of the present approach for the plate resting on an elastic foundation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.676-679
• /
• 1995

Practically, induction surface hardening is used widely to enhance the local strength of structure. In this study, Fatigue limit and its S-T characteristic for raw and induction hardened specimen of SCM440 is studied experimentally. The life prediction was considered by Juvinall's equation and its predicted result is compared with experiment.

• 한국지반신소재학회논문집
• /
• 제5권3호
• /
• pp.37-44
• /
• 2006

지반굴착에 의한 일반적인 흙막이공과 친환경성을 만족시키기 위한 조경 및 보강옹벽 등의 시공을 동시에 적용하게 되면 시공기간이 증가하고, 이에 따른 비용도 커지게 된다. 이러한 단점을 극복하여 흙막이벽과 옹벽구조물의 기능을 동시에 가지는 옹벽겸용 흙막이벽 공법이 제시된 바 있다. 하지만 기존에 제시된 공법은 굴착깊이에 대한 한계성을 가지고 있기 때문에 본 연구에서는 기존 공법을 응용한 설계패턴을 제시하였고, 시공사례를 통하여 응용설계법에 대한 시공성 및 안정성을 평가하였다. 그 결과, 배면의 여유공간이 부족한 현장의 경우 일반적인 흙막이벽이 갖는 말뚝의 변위 및 굴착한계깊이가 다소 해결될 수 있는 공법으로서의 적용이 가능함을 확인할 수 있었다.

• 분석과학
• /
• 제14권6호
• /
• pp.486-493
• /
• 2001

본 연구는 SIMS를 이용한 bismuth titanate 박막의 깊이방향 분석에 있어서 mesh grid를 사용한 경우와 사용하지 않은 경우, offset voltage를 사용한 경우와 사용하지 않은 경우 등 분석조건에 따른 charging effect 그리고 검출한계의 특성을 검토하고자 하였다. 결과에 따르면 -40 V의 offset voltage를 사용하였을 경우는 charging effect의 감소는 물론 검출한계도 낮출 수 있었으나 mesh grid를 사용하였을 경우에는 charging effect는 다소 줄일 수 있었으나 반면 검출 한계는 오히려 높아졌다. O- 일차이온을 적용한 경우는 -40 V의 offset voltage를 사용하였을 때와 동일한 효과를 얻을 수 있었다.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.327-335
• /
• 2021

Microcracks can rapidly grow and develop in high-strength steels used in offshore structures. It is important to render these microcracks harmless to ensure the safety and reliability of offshore structures. Here, the dependence of the aspect ratio (As) of the maximum depth of harmless crack (a_hlm) was evaluated under three different conditions considering the threshold stress intensity factor (Δk_th) and residual stress of offshore structural steel F690. The threshold stress intensity factor and fatigue limit of fatigue crack propagation, dependent on crack dimensions, were evaluated using Ando's equation, which considers the plastic behavior of fatigue and the stress ratio. a_hlm by peening was analyzed using the relationship between Δk_th obtained by Ando's equation and Δk_th obtained by the sum of applied stress and residual stress. The plate specimen had a width 2W = 12 mm and thickness t = 20 mm, and four value of As were considered: 1.0, 0.6, 0.3, and 0.1. The a_hlm was larger as the compressive residual stress distribution increased. Additionally, an increase in the values of As and Δk_th(l) led to a larger a_hlm. With a safety factor (N) of 2.0, the long-term safety and reliability of structures constructed using F690 can be secured with needle peening. It is necessary to apply a more sensitive non-destructive inspection technique as a non-destructive inspection method for crack detection could not be used to observe fatigue cracks that reduced the fatigue limit of smooth specimens by 50% in the three types of residual stresses considered. The usefulness of non-destructive inspection and non-damaging techniques was reviewed based on the relationship between a_hlm, a_NDI (minimum crack depth detectable in non-destructive inspection), a_{cr N} (crack depth that reduces the fatigue limit to 1/N), and As.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1469-1476
• /
• 2003

This paper provides plastic limit load solutions of cylinders with circumferential part-through surface cracks under combined axial tension, internal pressure and global bending. Such solutions are developed based on detailed three-dimensional (3-D) finite element (FE) limit analyses using elastic-perfectly-plastic material behaviour, together with analytical solutions based on equilibrium stress fields. For the crack location, both external and internal cracks are considered. Furthermore, in terms of the crack shape, both semi-elliptical and constant-depth surface cracks are considered. The resulting limit load solutions are given in a closed form, and thus can be easily used in practical situations. Being based on detailed 3-D FE limit analysis, the present solutions are believed to most reliable, and thus to be valuable information for integrity assessment of piping.

• 콘크리트학회논문집
• /
• 제26권2호
• /
• pp.181-188
• /
• 2014

이 연구에서는 기존의 가상고정점 모델을 통한 단일 현장타설말뚝 설계를 보완하고자, 등가 지반면 스프링 모델을 바탕으로 한 기둥과 말뚝의 상호작용을 고려한 해석법을 제시하였으며, 이를 토대로 주요 영향인자에 따라 말뚝의 최소철근비 적용성을 분석하였다. 나아가, 기둥과 말뚝 조건을 고려하여 말뚝에 철근비별 적용 가능한 한계깊이를 제안하였다. 이 연구 결과, 기둥-말뚝의 상호작용을 고려한 해석은 가상고정점 모델 해석에서 전체 모델링 해석으로 넘어가는 중간단계의 비교적 정확하고 경제적인 설계법임을 알 수 있었으며, 이 해석법을 통해 최소철근비 적용성을 평가한 결과, 말뚝의 최대 휨모멘트는 말뚝재료의 균열모멘트 이내에서 모두 발생하는 것으로 나타나 말뚝에는 최소철근비(0.4%)를 적용하여도 만족하는 것을 알 수 있었다. 이를 토대로, 현장사례를 통해 철근비별 적용 가능한 한계깊이($L_{As=x%}$)를 제안하였으며, 정규화된 철근비별 적용 가능한 한계깊이 ($L_{As=x%}/L_P$)는 정규화된 말뚝길이($L_P/D_P$)에 따라 선형적으로 감소하여 일정한 값에서 수렴함을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1811-1814
• /
• 2007

Accommodation error is one of the main factors that degrade the comfort while watching stereoscopic 3D images. We analyze the limit of the expressible 3D depth without an accommodation error using the human factor information and wave optical calculation under Fresnel approximation.