• 한국환경복원기술학회지
• /
• 제15권6호
• /
• pp.61-67
• /
• 2012

This study was conducted to evaluate the effects of soil covering and vegetation base materials implementation on the growth of Lespedeza cyrtobotrya Miq. in abandoned coal mine land. We compared the biomass of L. cyrtobotrya at the study plots of four different soil covering depth (control, 10cm, 20cm, and 30cm) and four different compounds of vegetation base materials composed of soil conditioner (S), erosion control (E), and peat moss (P) (control, S+P, E+P, and S+E+P). The result showed that the biomass of L. cyrtobotrya was higher in the study plots implemented with soil covering than control plot, although the increase in biomass was not constant with soil covering depth. In case of the vegetation base materials treatments, the biomass was highest in S+E+P plot, and S+P and E+P plots showed higher biomass than control plot.

• Imaging Science in Dentistry
• /
• 제42권4호
• /
• pp.243-247
• /
• 2012

Purpose: This study was performed to compare the inverted digital images and film-based images of dry pig mandibles to measure the periodontal bone defect depth. Materials and Methods: Forty 2-wall bone defects were made in the proximal region of the premolar in the dry pig mandibles. The digital and conventional radiographs were taken using a Schick sensor and Kodak F-speed intraoral film. Image manipulation (inversion) was performed using Adobe Photoshop 7.0 software. Four trained examiners made all of the radiographic measurements in millimeters a total of three times from the cementoenamel junction to the most apical extension of the bone loss with both types of images: inverted digital and film. The measurements were also made in dry mandibles using a periodontal probe and digital caliper. The Student's t-test was used to compare the depth measurements obtained from the two types of images and direct visual measurement in the dry mandibles. A significance level of 0.05 for a 95% confidence interval was used for each comparison. Results: There was a significant difference between depth measurements in the inverted digital images and direct visual measurements (p>|t|=0.0039), with means of 6.29 mm ($IC_{95%}$:6.04-6.54) and 6.79 mm ($IC_{95%}$:6.45-7.11), respectively. There was a non-significant difference between the film-based radiographs and direct visual measurements (p>|t|=0.4950), with means of 6.64mm($IC_{95%}$:6.40-6.89) and 6.79mm($IC_{95%}$:6.45-7.11), respectively. Conclusion: The periodontal bone defect measurements in the inverted digital images were inferior to film-based radiographs, underestimating the amount of bone loss.

• 한국IT서비스학회지
• /
• 제21권1호
• /
• pp.163-179
• /
• 2022

Two dominant phenomena in modern world; population ageing and digitalization, have led public sector organizations to heavily rely on B2C(Business-to-Consumer) mobile applications. Yet, fatal concerns and complaints have often been raised by the mobile application users, notably from social welfare sector. With the continual expansion of digital landscape as well as the growth of life expectancy, usage of mobile applications has become prevalent across the stakeholders involved in social welfare sector. 'Smart Long-Term Care (SLTC)', inter alia, is a primary example of such mobile applications, designed to support Long-Term Residential Care (LTRC) service. The main goal of SLTC is to serve more convenient and practical LTRC service for both caregivers and care receivers. To examine user satisfaction of SLTC mobile application, this study investigates existing challenges and means to improve user satisfaction. Hence, we conducted this study using two methods: in-depth interview and topic modeling. Interestingly, two research outcomes commonly indicated that 5 factors (stability, accessibility, usefulness, responsiveness, and ease of use) were found significant in affecting user satisfaction of SLTC. Our findings suggest that the aforementioned factors can be seen as potential causes of the genuinely low user satisfaction. Eventually, this work will be a stepping-stone to elevate the overall quality level of LTRC service along with the user satisfaction degree of SLTC mobile application.

• 자원환경지질
• /
• 제19권spc호
• /
• pp.103-112
• /
• 1986

The geology of the mine consists of Cretaceous lower andesitic breccia member, tuffaceous black shale, upper tuffaceous sandstone member and andesitic dike. Ore bodies are two parallel veins of breccia originated from hydrothermal activity of later acidic igneous intrusion. First two periods of mineralization, gold and silver, and copper, and later copper enrichment was identified. The first two might have been occurred during boiling of hydrothermal solution that formed breccia and copper enrichment was accomplished by enhancement of $CO_2$ fugacity from the organic material contained in the black shale. With all the geologic and mineralogic data and inferences attained from other investigators it was estimated that the optimum depth of the ore mineralization was between 500m and 300m below the surface of Kyong-Sang series.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.40-43
• /
• 1997

This paper presents a 3D object recognition method for generation of 3D environmental map or obstacle recognition of mobile robots. An active light source projects a stripe pattern of light onto the object surface, while the camera observes the projected pattern from its offset point. The system consists of a laser unit and a camera on a pan/tilt device. The line segment in 2D camera image implies an object surface plane. The scaling, filtering, edge extraction, object extraction and line thinning are used for the enhancement of the light stripe image. We can get faithful depth informations of the object surface from the line segment interpretation. The performance of the proposed method has demonstrated in detail through the experiments for varies type objects. Experimental results show that the method has a good position accuracy, effectively eliminates optical noises in the image, greatly reduces memory requirement, and also greatly cut down the image processing time for the 3D object recognition compared to the conventional object recognition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.368-373
• /
• 2005

효과적인 초음속 연소를 수행하기 위해 연료와 공기의 빠른 혼합을 이룰 수 있는 연료 분사 기술이 요구된다. 본 수치적 연구의 목적은 초음속 유동장내에서 공동 주위 연료분사 위치에 따른 연료/공기 혼합 및 연소 현상을 살펴보고자 한다. 연료 분사 위치는 연소기내에서 영향을 미치는 공동의 길이-깊이비를 변화시킨다. 따라서 같은 형상의 공동이라 하더라도 공동 주위 유동 특성이 달라지므로 연소기 내부의 연료/공기 혼합과 연소 현상에 영향을 끼치게 된다.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.138-145
• /
• 1999

Surface hardening of AC4C aluminium alloy with TiC powders was obtained by plasma transferred are (PTA) method, Bead appearance, microstrucutre and wear behavior were characterized in relation to the torch current, powder feed rate and wear condition. The width and the depth of bead were mainly increased with increasing torch current. The comparison of wear behavior between AC4C alloy and PTA treated AC4C alloy showed the remarkable enhancement of wear resistance.

• 품질경영학회지
• /
• 제25권3호
• /
• pp.96-107
• /
• 1997

The recent stream to reliability prediction is that it is totally inclusive in depth to consider even the operating and environmental condition at the level of finished goods as well as component itselves. In this study, firstly we present the reliability prediction methods by entire failure rate model which failure rate at the system level is added to the failure rate model at the component level. Secondly we build up the improved bases of reliability demonstration through a, pp.ication of Kaplan-Meier, Cumulative hazard, Johnson's methods as non-parametric and Maximum Likelihood Estimator under exponential & Weibull distribution as parametric. And also present the methods of curve fitting to piecewise failure rate under Weibull distribution, PRST (Probability Ratio Sequential Test), curve fitting to S-shaped reliability growth curve, computer programs of each methods. Lastly we show the practical for determination of optimal burn-in time as a method of reliability enhancement, and also verify the practical usefulness of the above study through the a, pp.ication of failure and test data during 1 year.

• 대한기계학회논문집A
• /
• 제30권1호
• /
• pp.42-51
• /
• 2006

An indentation method to determine equi-biaxial residual stress is proposed by examining the data from the incremental plasticity theory based finite element analyses. We first select optimal normalized-parameters, which are minimally affected by indentation depth and material properties. Numerical linear regressions of obtained data exhibit that maximum load and contact area of imprint are the main parameters measuring the residual stress. The proposed indentation approach provides a substantial enhancement in accuracy compared with the prior methods.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.52-59
• /
• 2005

The goal of this project is to estimate the instream flow of the Han River Basin to ensure the adequate supply of suitable quality water for preservation and enhancement of aquatic ecosystems. A applied model is Physical Habitant Simulation System(PHABSIM) of Instream Flow Incremental Methodology(IFIM). The parameters which are needed to simulation by PHABSIM such as flow depth, velocity distribution and channel cover with cross section data are obtained by field survey. The Habitat Suitability Criteria with the application of univariate curve on Zacco platypus as a target species was able to be established by conducting the field investigation. The estimated results of ecological recommended instream flow by this study has important meanings that the future river management have to seriously take into account for the natural environment and functions of river system.