• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.719-732
• /
• 2007

Purpose: Various bone graft materials are being used for periodontal tissue regeneration. Th materials are being developed continuously for ideal clinical effects. Therefore, it is necessary to identify the clinical characteristics of each bone graft material through comparing the various bone graft materials statistically and in doing so, proposing a more efficient bone graft material. In this study, the following results were attained through comparing the clinical effects among the bone graft materials, using the statistical method based on the clinical studies published at the department of periodontology of Yonsei hospital. Materials and Method: 6 selected studies of department of Periodontology at Yonsei University Hospital were based on clinical study of bone grafting in intrabony defects. It was compared the clinical parameters among the 6 clinical studies, using the statistical META analysis. Result: When comparing the probing depth reduction, there was a relatively great amount of decease when using the xenograft, Anorganic Bovine Derived Hydroxapatite Bone Matrix/Cell Binding Peptide(ABM/P-15: PepGen $P-15^{(R)}$) and the autogenous bone and absorbable membrane, d, 1-alctide/glycolide copolymer(GC: $Biomesh^{(R)}$). The allogfrafts showed a relatively low decrease in the probing depth and clinical attachment change. It also showed a slight decrease in the bone probing depth. The allografts showed various results according to different bone graft materials. When comparing the ABM/P-15 and bovine bone $powder(BBP^{(R)})$, ABM/P-15 showed a relatively high clinical attachment level and the bovine bone powder showed a relatively high clinical attachment level. The probing depth change and gingival recession change showed a lower value than the mean value between the two bone graft materials. The synthetic bone showed a relatively high decrease in clinical attachment level and periodontal probing depth change. There was a relatively larger amount of gingival recession when using Bioactive Glass(BG) but a relatively low bone regeneration effect was seen. Conclusion: Good restorative results of the periodontal tissue can be attained by applying the various bone graft materials being used today after identifying the accurate clinical effects.

• The Journal of the Korean dental association
• /
• v.12 no.3
• /
• pp.195-198
• /
• 1974

The purpose of this study is to obtain the histopathological change of dentin and pulp when the prepared cavity is exposed to oral fluid without protection. The results were as follows: 1. Hyperemia of pulp blood vessel and round cell infiltration in odontoblast layer observed on the one week experimental dogs. 2. Marked edematous change, round cell infiltration, fibrotic change and prolif eration of collagenous fiber showed on the 8 week experimental dogs. 3. Prepared cavity should be protected by the biologically accepted lining mater ials regardless of cavity depth.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.195-196
• /
• 2019

The temperature and relative humidity in concrete change with the passage of time depending on factors such as compressive strength. They are also different depending upon internal depth of concrete. In this study, we have measured the change of the temperature and relative humidity in the concrete for two years to act as the parameters to evaluate the concrete durability and effective maintenance.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.71-76
• /
• 2001

In general, it is known that the wear rate of the abrasive and the removal rate of the metal bond of the grinding wheel should be balanced to maintain the depth of the insulating surface layer to an appropriate level. In order to accomplish, the high quality ELID grinding, therefore, it is necessary to measure the depth of the insulating layer in real-time and then to control the electrolytic conditions to keep the depth to a certain level. In this study, an in-process measurement system of the insulated layer using two gap sensors - a capacitor type and an eddy current type - developed and the change of the status of the insulated layer during ELID grinding is detected. And from the experimental data, we have chosen the best mathematical model to predict the depth of the insulating layer.

• Journal of Mechanical Science and Technology
• /
• v.14 no.7
• /
• pp.722-729
• /
• 2000

The goal of this paper is to describe an advanced method of a crack detection: a new way to localize position and to estimate depth of a crack on rotating shaft. As a first step, the shaft is physically modelled with a finite element method and the dynamic mathematical model is derived using the Hamilton principle; thus, the system is represented by various subsystems. The equations of motion of the shaft with a crack are established by adapting the local stiffness change through breathing and gaping from the crack to an undamaged shaft. This is the reference system for the given system. Based on a model for transient behavior induced from vibration measured at the bearings, a nonlinear state observer is designed to detect cracks on the shaft. This is the elementary NL-observer (Beo). Using the observer, an Estimator (Observer Bank) is established and arranged at the certain position on the shaft. When a crack position is localized, the procedure for estimating of the depth is engaged.

• Architectural research
• /
• v.20 no.3
• /
• pp.75-82
• /
• 2018

The aim of the study is to evaluate the concrete shear strength and structural behavior of two general beams and eight shape memory alloys (SMAs)-reinforced beams under the flexural test. This work compares the existing reference formula for concrete shear strength with test result to provide the basic data for the design of highly intelligent reinforced concrete (hereinafter, HIRC) beams. The evaluation of the concrete shear strength was performed with effective depth (d=65, 70, 80), SMA diameter change (ø=2.0, 2.5) as the main variables of the specimens. For the relationship between the effective depth and the $V_{\exp}/V_{cal}$, the test result shows that the concrete shear strength gradually approaches 1.0 as the effective depth length increase. For the AIJ formula, the specimens are approached evenly for comparison between $V_{\exp}/V_{cal}$ and the by-product (garnet, fly-ash) reinforced specimen; however, other formulas indicate a deviation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.129-129
• /
• 1998

Most of the surface/interface analysis tools have limited depth profiling c capability in terms of the profiling range and the depth resolution. However, M MEIS can profile the surface and subsurface composition and structure q quantitatively and non-destructively with atomic layer depth resolution. I In this presentation, the MEIS system developed at KRISS will be briefly d described with an introduction on the principle of MEIS. Recent MEIS r results on the surface and interface composition and structural change due to i ion bombardment will be presented for preferential sputtering of T:없Os and d damage depth profiles of SHooD, Pt(l11), and Cu(l1D due to Ar+ ion b bombardment. Direct observation of strained Si lattices and its distribution i in the SHool)-SiCh interface and the initial stage of Co growth on Pt(l11) w will be reported. H surfactant effects on epitaxial growth of Ge on Si(ooD w will be discussed with STM results from SND.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.62-68
• /
• 2015

In this paper, we propose a watermarking method for protecting the ownership of three-dimensional (3D) content generated from depth and texture images. After selecting the target areas to preserve the watermark by depth-image-based rendering, the reference viewpoint image is moved right and left in the depth map until the maximum viewpoint change is obtained and the overlapped region is generated for marking space. The region is divided into four subparts and scanned. After applying discrete cosine transform, the watermarks are inserted. To extract the watermark, the viewpoint can be changed by referring to the viewpoint image and the corresponding depth image initially, before returning to the original viewpoint. The watermark embedding and extracting algorithm are based on quantization. The watermarked image is attacked by the methods of JPEG compression, blurring, sharpening, and salt-pepper noise.

• Korean Journal of Microbiology
• /
• v.35 no.1
• /
• pp.78-81
• /
• 1999

The change of soil microbial populations was studied at the burnt areas of Mt. Jirisan in Hddong-Gun, Kyungsangnam-Do, where the fire had occurred on Oct. 21 in 1997. On the first day of the fireextinguished, the microbial density (CFUIg dry soil) was investigated at the surface, 5 cm, 10 cm, 20cm, and 30 cm depth of soils. Bacteria at the surface and 5cm depth of burnt sites were estimatedwith the low density level of $10^2$ CFW/g soil comparing to the $10^6$ CFUIg soil of the neighboring unburntsites. Actinomycetes of burnt sites were completely disappeared at the surface, and were estimatedwith the low density level of $10^3$ CFUig soil at thc 5 cm depth comparing to the 10"CFUigsoil at the depth of unburnt sites. Fungi wcrc not isolated at the surface and 5 cm depth at all.However, the rarest lire was not found to decrease the microbial populalions at the lower depths than10 cm. In addilion, the recovery or soil microbial populations following the fire was bimonthly investigatedat the surrace and 5 cm depth. Most of microbial densities at the burnt sites were greatlyincreased two months after the fire, being enough to he compared with the neighboring unburnt sites.However, actinomycetes only at the surface of burnt sites still were estimated the low density level of$10^4$ CFUig soil 4 months after the fire comparing to the $10^6$CFIg soil of unburnt sites.TEX>CFIg soil of unburnt sites.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.796-803
• /
• 2008

In this paper, we present a depth scaling method for multiview images that could provide an 3D depth that a user prefers. Unlike previous works that change a camera configuration, the proposed method utilizes depth data in order to carry out the scaling of a depth range requested by users. From multivew images and their corresponding depth data, depth data is transformed into a disparity and the disparity is adjusted in order to control the perceived depth. In particular, our method can deal with multiview images captured by multiple cameras, and can be expanded from stereoscopic to multiview images. Based upon a DSCQS subjective evaluation test, our experimental results tested on an automultiscopic 3D display show that the perceived depth is appropriately scaled according to user's preferred depth.