• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1429-1436
• /
• 1994

We have prepared Ba0.5Sr0.5TiO3 thin films on Si substrate without buffer layer. Deposition was carried out by off-axis rf magnetron sputtering method using Ba0.5Sr0.5TiO3 stoichiometric target. The substrate temperature was changed from 40$0^{\circ}C$ to $700^{\circ}C$ during deposition. As the substrate temperature increased, relative intensity of (110) peak increased up to $600^{\circ}C$, however preferred orientation changed from (110) to (h00) beyond $650^{\circ}C$ of substrate temperature. Deposited films showed microstructures with fine grains whose diameters are less than 100 nm, and columnar structure was observed in the cross-sectional SEM micrograph. AES depth profile showed no significant diffusion at the interfacial reaction area. The effective dielectric constant of films showed maximum value at $600^{\circ}C$, and the leakage current increased with increasing substrate temperature, which may be ascribed to the crystallization of amorphous phases at grain boundary.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3277-3285
• /
• 1996

In this paper, w designed an opical power distribution device for application to an optical switching and an optical subscriber loop. We fabricated PSG thin film by LPCVD. Based on the measured index of fabricted thin film, rib-type waveguide was transformed to two-dimension by the effective index method and we simulated dispersion property to find asingle-mode condition. We found that the optimum design parameters of rib-type waveguide are:cladding layer of 3.mu.m, core layer of 3.mu.m, buffer layer of 10.mu.m, and core width of 4.mu.m. Each side of the guiding region was etched down to 4.mu.m to shape the core. We used these optimum parameters of the rib-type waveguide with branching angle of 0.5.deg. and simulted the Y-branch waveguide by the BPM simulation. Numerical loss in branching area was claculated to be 0.1581dB and equal to the total loss of the Y-branch. The loss of the fabricated Y-branch waveguide on PSG film ws 1.6dB at .lambda.=1.3.mu.m before annealing but was 1.2dB after annealing at 1000.deg. C for 10 minutes. Consequently, the loss of branching area from 3000.mu.m to 6000.mu.m in the z-direction was 0.8dB, and single-mode propagation was confirmed by measuring the near field pattern. For coupling the fabricated Y-branch waveguide with an optical fiber, we fabricated V-groove which was used as the upholder of optical fiber. An etching angle was 54.deg. and the width and depth of guiding groove was 150.mu.m, 70.mu.m, respectively. The optical fiber is inserted onto V-groove. Both the Y-branch and V-groove were connected through the index matching oil. Coupling loss after connecting Y-branch and the optical fiber on V-groove was 0.34dB and that after injecting index mateching oil was 0.14dB.

• 전자공학회논문지CI
• /
• 제37권4호
• /
• pp.37-45
• /
• 2000

본 논문에서는 관찰자의 위치가 변하더라도 이를 실시간 추적하여 관찰자의 시점에 정확히 대응하는 입체영상을 구현할 수 있는 방법을 제안하였다. 즉 고성능의 하드웨어 장비가 아닌, 일반적으로 사용되는 개인용 컴퓨터에서도 인간의 두 눈을 찾아내고 관찰자의 움직임을 추적할 수 있도록 하는 알고리즘을 제안하였으며, 또한 관찰자의 위치에 따라 달라지는 물체의 모습을 표현해 주기 위해 유한한 다수의 입력 영상 정보를 이용하여 입체 영상을 제작하고 관찰자의 위치 이동에 정확히 대응하는 영상을 디스플레이하는 방법을 제안하였다. 본 논문에서 제안한 방법을 통해 평균 0.39초의 짧은 시간내에 약 97.5%까지 정확히 두 눈의 위치를 찾을 수 있었으며, Fl6 모델을 사용하여 여러 관찰자의 시점에 대응하는 3차원 디스플레이 실험 결과를 보임으로써 본 방법의 우수함을 보였다. 그리고 실제 로봇을 이용하여 좌우 카메라로 얻은 좌우 영상과 인벤터를 통해 버퍼에서 렌더링되는 스테레오 영상과의 유사도를 측정하여, 관찰자의 시점에 대응하여 렌더링되는 3차원 영상이 최적의 시점 대응 영상임을 확인하였다.

• 한국실내디자인학회논문집
• /
• 제20권4호
• /
• pp.74-82
• /
• 2011

All the phenomena and subjects of nature and society are within correlation interconnection, and they are inseparably connected one another. The elements of this interaction can be found out through the concept of transparency in the space composition of Korean traditional architecture. This study is focusing on the access space, in other words, a gate-house that is a buffer zone playing a process role up to the main space among successive spaces. It was chosen to be the subject of the study since it strengthens convergence into the main building and with the effect connecting spaces, it could show well the spatial possibility of transparency. Besides, the subject of the study is limited to the Moonru Multi roofs that improves the functionality of spaces between gate-houses, and it is intended to progress contents by comparative analysis of two kinds such as Seo Won gate-house and temple gate-house. Korean traditional architecture places emphasis on harmony within the whole spaces. There are intimate relations between surrounding environment, external spaces and internal spaces, and it is important understand the spatial relations according to the shape appearing through interactions of parts in the whole spaces. In conclusion, the Moonru Multi roofs is analyzed with the method of extracting the concept that is contained in the frame of analysis and through ecological views through a visible and structural method. It can be understood what kinds of method for communication were used for ancestors to recognize and use spaces with the deduced concept through the analysis of the Moonru Multi roofs with different character.

• 센서학회지
• /
• 제23권2호
• /
• pp.94-98
• /
• 2014

Aluminum nitride (AlN) thin films with a TiN buffer layer have been fabricated on SUS430 substrate by RF reactive magnetron sputtering at room temperature under 25~75% $N_2$ /Ar. The characterization of film properties were performed using surface profiler, X-ray diffraction, X-ray photoelectron spectroscopy(XPS), and pressure-voltage measurement system. The deposition rates of AlN films were decreased with increasing the $N_2$ concentration owing to lower mass of nitrogen ions than Ar. The as-deposited AlN films showed crystalline phase, and with increasing the $N_2$ concentration, the peak of AlN(100) plane and the crystallinity became weak. Any change in the preferential orientation of the as-deposited AlN films was not observed within our $N_2$ concentration range. But in the case of 50% $N_2$ /Ar condition, the peak of (002) plane, which is determinant in pressure sensing properties, appeared. XPS depth profiling of AlN/TiN/SUS430 revealed Al/N ratio was close to stoichiometric value (45:47) when deposited under 50% $N_2/Ar$ atmosphere at room temperature. The output signal voltage of AlN sensor showed a linear behavior between 26~85 mV, and the pressure-sensing sensitivity was calculated as 7 mV/MPa.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.46-52
• /
• 1998

본 논문에서는 차량에 부착된 번호 판을 컴퓨터에 입력한 후 이를 색 분해법과 역전파 신경망을 이용하여 자동차 번호를 고속으로 추출할 수 있는 방법을 제시하였다. 칼라 비디오 카메라에 의해 컴퓨터에 입력되는 자동차의 동화상을 R, G, B 신호로 분리한 후 승용차의 번호판 색상을 이용하여 R, G ,B의 각 농도에 맞는 임계치를 설정하여 2치화 시켜 번호판 영역을 추출한 후에 2 치화된 이 화상 신호를 프레임 버퍼에 기록하여 컴퓨터의 화상 데이터로 입력시켰다. 그리고 문자 인식 알고리즘을 적용한 후 문자 인식을 개선시키기 위해 역전파 신경 회로망을 적용하여 차랑 번호판 인식 시스템을 구현하였다. 또한 주변의 유사 색상의 존재로 인한 흔돈을 극소화시키기 위해 차량 번호판의 직사각형 구조를 이용하여 수평.수직선 추출 알고리즘을 사용하였으며 실험 결과 고속으로 차량 번호판 추출 및 인식이 가능함을 보였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권6호
• /
• pp.94-103
• /
• 2017

Surface soil is one of the most important resources that have many functions for human needs such as conservation of water resource, purification of contaminated materials, and productivity of food or energy. However, the surface soil is a limited resource that cannot be recovered readily for a long time once it is lost by erosion. In Korea, the Ministry of Environment enacted the notification on the investigation of surface soil erosion and corresponding countermeasures. As the results, database of soil quality assess criteria (biomass, groundwater recharge, habitat, carbon storage, buffer, and soil loss) was established, and the web-based system that can evaluate surface soil conditions was developed. However, non-experts have difficulties in using the system because the system requires in-depth knowledge about soil qualities. In this study, the Web Geographic Information System (GIS) watershed-based surface soil information system was developed to improve usability of the system and accessibility of soil quaility database. The system provides the current condition of surface soil characteristics and GIS-based soil data at selected locations. The users are able to download soil quality data in different districts, watersheds, and special regions allocated by TauDEM module. The system developed in this study would valuable surface soil information for studies of soil quality and its environmental effects, and thereby contributing to establishing more appropriate and robust soil conservation laws.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.470-488
• /
• 1996

The end products of the metabolism of the oral microorganism, organic acids, are an element that produces dental caries. Four organic acids in plaque fluid, lactic acid, acetic acid, succinic acid, propionic acid which take the important role in producing dental caries, were chosen to evaluate the effect of acid type and concentration. The subject, $100{\mu}m$ in thickness, were immersed in acid-buffer solution which has the different acid concentration of 10mM, 25mM, 50mM, 100mM and pH 4.3 and degree of saturation was $0.153{\pm}0.003$ kept in constant and were operated to produce artificial caries under different demineralization time (1, 2, 3 day) at x25. The results were obtained by observing under polarizing microscope at x25. 1. The subsurface lesion, specific finding of incipient enamel caries, showed positive birefringence. but surface zone and sound enamel showed negative birefringence. 2. The demineralization rate of enamel was increased as the acid concentration increased. 3. The subsurface lesion showed increasing depth in the order of lactic, acetic, propionic acid, succinic acid. 4. The concentration of organic acid in artificial caries system had an independent effect on demineralization rate in enamel under the constant pH and degree of saturation. The result of this study showed that not only pH and the acid strength but the concentration of organic acid had an independent effect on demineralization rate in early enamel caries. And through the further research on the factors influencing enamel demineralization, it will be necessary to develop an effective caries preventive therapy.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.29-40
• /
• 1993

본 연구는 정수면으로 부터 얕게 잠겨 항주하는 3차원 수중익에 의한 비선형 조파현상의 특성규명을 위한 기초연구로서 수중익이 예인수조안에서 일정속도로 항주할 때 자유표면에 발생하는 비선형 파형의 특성과 수중익에 작용하는 유체력을 계산하기 위한 수치해법의 개발을 목적으로 하였다. 수치해법으로는 변분원리에 기초한 유한요소법올 사용하였으며 수중익 근처에서는 비선형 자유표면조건을 엄밀하게 만족시켰고 수중익으로 부터 충분히 떨어진 영역에서는 종래의 선형화된 자유표면 경계조건을 만족시켰다. 수치해법의 계산효율을 높이기 위하여 비선형영역과 선형영역 사이에 인위적인 비선형-선형 완충영역을 도입하여 계산영역을 크게 줄였다. 수중익을 간단한 직사각형 보오텍스계로 표현하여 유속과 몰수길이, 보오텍스의 세기 및 분포의 변화에 따른 비선형 파형의 특성을 조사하였으며 특히 자유 보오텍스선이 비선형 파형에 미치는 영향을 파악하였다. 파동에 의하며 수중익에 유기되는 속도성분들의 크기 및 분포, 양력 및 유기항력에 대한 계산을 수행하여 자유표면의 비선형성에 의한 영향을 규명하였다.

• 터널과지하공간
• /
• 제34권1호
• /
• pp.71-87
• /
• 2024

고준위방사성폐기물 심층처분 시, 처분공 주변의 근계암반은 높은 지중응력과 재포화된 벤토나이트 완충재의 팽윤압, 방사성 원소 붕괴열의 영향을 받아 국부적으로 투수계수가 변화될 수 있다. 본 연구에서는 국내 유력한 처분 대상 부지 암종 중의 하나인 결정질 경암으로서의 화강암을 대상으로, 실제 처분 환경에서 예상되는 다양한 구속압과 온도 조건을 적용하여 투수계수 변화 특성을 실험적인 방법을 통하여 고찰하고자 하였다. KURT 화강암 시험편 하나당 3개 이상의 정수압 조건에서 투수시험을 수행하여 구속압이 증가함에 따라 투수계수가 지수적으로 감소하는 관계를 도출하였다. 예상 최대 온도로 설정한 90℃ 이하 수준에서는 온도에 의한 투수계수 변화가 무시 가능할 정도로 작음을 확인하였다. 추가로 초기투수계수가 초기공극률의 거듭제곱에 비례하는 상관관계를 도출함으로써, 특정 공극률을 지닌 화강암이 일정 구속압 하에 있을 때 가지는 투수계수 값을 유추할 수 있었다.