• 한국대기환경학회지
• /
• 제24권6호
• /
• pp.693-703
• /
• 2008

The important source of the mercury in water-column is the influx of atmosphere mercury, via dry and wet deposition. In this study, wet deposition of mercury was estimated to be $14.56{\mu}g/m^2$ during 15 months at the Lake Soyang, which is a little higher than those observed in the several rural US Mercury Deposition Network (MDN) sites with similar precipitation depth. The mercury concentration in precipitation did not show a positive correlation with atmospheric RGM (reactive gaseous mercury) concentration, while maintaining good correlation with atmospheric $PM_{2.5}$ at Soyang Dam. This result suggests that the contribution of particulate Hg to the total Hg wet deposition should be more significant than that of RGM. In this study, both precipitation depth and precipitation type affected the amount of wet deposition and the concurrent mercury levels in precipitation. There was generally an inverse relationship between precipitation depth and Hg concentration in precipitation. Precipitation type was another factor that exerted controls on the Hg concentration in precipitation. As a result, the highest concentration of Hg was observed in snow, followed by in mixture (snow+rain) and in rain.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권11호
• /
• pp.1542-1547
• /
• 2005

The Melanocortin-4 Receptor (MC4R) and Insulin-like Growth Factor 2 (IGF2) are two important candidate genes related to fat deposition and carcass traits. MC4R was found on study on human obesity and then was studied as candidate gene affecting food intake and fat deposition traits in mice and pigs. Insulin-like Growth Factor 2 (IGF2) gene plays an important role on tumor cell proliferation and muscle growth. It also affects fat traits and live weight in pigs. In this paper, MC4R and IGF2 were studied as two candidate genes associated with important economic traits such as fat deposition and carcass traits in five different pig populations. Taq I-PCR-RFLP and Bcn I-PCR-RFLP were respectively used to detect the polymorphism of genotypes of MC4R and IGF2 genes. Different MC4R genotype frequencies were observed in four populations. IGF2 genotype frequencies were also different in two populations. The results of association analysis show both MC4R and IGF2 genes were significantly associated with fat deposition and carcass traits in about 300 pigs. This work will add new evidence of MC4R and IGF2 affecting fat deposition and carcass traits in pigs and show that two genes can be used as important candidate genes for marker assistant selection (MAS) of growth and lean meat percentage in pigs.

• 방사성폐기물학회지
• /
• 제8권2호
• /
• pp.151-158
• /
• 2010

무에 대한 $I_2$ 증기의 작물체 침적속도와 뿌리 전류계수를 측정하기 위하여 파종 후 29 일에서 53 일 사이에 생육시기별로 작물체를 $I_2$ 증기에 80 분 간 피폭시켰다. 피폭은 오전 중에 투명한 상자 내에서 수행되었다. 침적속도($ms^{-1}$)는 대체로 $1.0{\times}10^{-4}{\sim}2.0{\times}10^{-4}$의 범위로 생육밀도가 높을수록 증가하는 경향이었다. 또한 상대습도가 높을 경우 값이 커진다는 기존 보고와 어느 정도 일치하였다. 본 침적속도는 몇몇 야외 측정치보다 수 십 배 정도 낮았고 이는 주로 피폭상자 내의 낮은 풍속($0.2\;ms^{-1}$ 내외)에 기인하는 것으로 추정되었다. 뿌리 전류계수(작물체 총침적량에 대한 수확시 뿌리 내 함유량의 비)는 다소 보수적으로 계산하여 파종 후 29 일 피폭에서 $1.3{\times}10^{-3}$, 파종 후 53 일 피폭에서는 $5,0{\times}10^{-3}$이었다. 본 실험결과의 이용에 있어서는 기상 조건, 요오드의 물리화학적 형태 등에 유의할 필요가 있다.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.103-112
• /
• 2011

본 연구에서는 분포형 강우-유사-유출 모형을 이용하여 격자기반의 유역침식 및 퇴적 공간분포 정보를 획득하고, 유역의 지형학적, 수문기상학적 특성인자가 유역의 침식 및 퇴적에 미치는 영향을 평가한다. 유역의 지형학적 특성을 대표하는 인자로는 유역면적, 지표흐름 이동거리, 국부경사를 선택하였으며, 격자기반의 누적강우량을 수문기상학적 인자로 활용하여 대상유역에서의 침식 및 퇴적의 변동성을 분석한다. 유역면적에 따른 침식 및 퇴적의 변화양상을 분석하기 위해 대상유역은 Strahler 하천 차수법칙에 의해 다수의 소유역으로 구분되었으며, 면적에 따른 변동성을 분석한 결과, 침식 및 퇴적 모두 면적이 커짐에 따라 선형적으로 증가하는 경향을 보였다. 지표흐름의 이동거리 및 국부경사에 따른 침식 및 퇴적양상의 분석 결과, 침식은 유역전반에 걸쳐 비교적 균등하게 발생하였으나 퇴적의 경우 짧은 지표흐름 이동거리 및 완만한 경사를 갖는 하천선 인접 격자에서 집중적으로 발생하였다. 또한 격자별 누적 강우량에 따른 침식 및 퇴적 변동성 분석결과, 강우량이 증가함에 따라 침식은 점진적으로 증가하는 반면 퇴적은 강우량 증감에 따라 불규칙적인 변동성을 나타내었다. 이상의 결과로부터 본 연구에서 선택된 지형학적 인자들은 퇴적과정에 밀접한 관련이 있으며, 강우량은 유역의 침식에 영향을 미치는 매우 중요한 인자임을 확인하였다.

• 한국표면공학회지
• /
• 제20권3호
• /
• pp.106-117
• /
• 1987

The microhardness and the structural characteristics of the chemically vapor deposited TiN film on the 430 stainless steel substrate have been investigated with various deposition parameters such as the deposition time, the total flow rate, the flow rate ratio $(H_2/N_2)$, and the deposition temperature. The most important factor to affect the microhardness of the TiN film in this study was the denseness of the structure in connection with the degree of the lattice strain. The relationship between the lattice parameter changes and the grain size variation under all deposition conditions generally followed the grain boundary relaxation model. The (111) preferred orientation prevailed in the early stage of the deposition conditions, however, the (200) preferred orientation was developed in the later stage. The surface morphology at optimum conditions displayed a dense diamond shaped structure and the microhardness of the films was high (1700-2400Hv) regardless of the type of the substrates used.

• 한국진공학회지
• /
• 제5권1호
• /
• pp.77-84
• /
• 1996

Silicon deposition by Penning discharge was carried out using a mixture of 5% $SiH_4/H_2$ and Ar gas, and the effects of the deposition conditions(gas mixing raito, substrate temperature. discharge power etc.) on the growth rate, crystallinity and morphology of the films deposited were investigated. The magnetic field(800 G) confined the plasma in the region between the two cathodes and enhanced the discharge current by a factor of a few hundreds below 1 mTorr. The magnetic field-enhanced plasma density resulted in a very large deposition rate of about 300 $\AA$/min at $SiH_4$ flow rate of 0.7 sccm and the substrate temperature of $800^{\circ}C$. Characterization of the films by Raman spectroscopy, X-ray diffraction, and scanning electron microscopy revealed that an epitaxial film with a smooth surface grows above 80$0^{\circ}C$, an amorphous film below $400^{\circ}C$, and a rough polycrystalline film at intermediate temperatures.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.206-212
• /
• 1994

In this paper, We discuss the $POCI_3$ doping process according to the variation of deposition temperature, gas flow rate and doping time. The factors acted with $POCI_3$ doping are gas flow rate deposition temperature and time etc. Among them the temperature is the most important factor. For the $POCI_3$ flow rate, it should not exceed the resistivity saturation point developed on poly surface by annealing treatment. Therefore, this study suggests the optimum conditions of Poly-silicon treatments with the $POCI_3$ flow rate.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.47-48
• /
• 2006

Oridinal thermal spray process has developed into two ways, namely, temperature dominated represented by plasma spraying, and velocity dominated represented by HVOF. It is common for both that the particle materials sprayed are basically in melted or half melted condition. New process has developed recently, that is, Cold Spray and Aerosol Deposition. Particle's heating is limited in CS lower than half of the material's melting point. Moreover, exactly no heating is loaded in AD process. Through the investigation on common feature for these three spraying processes, potential of new material process - Particle Deposition, PD - is considered and proposed.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.444-446
• /
• 1999

The structure and composition of anodic films, formed on 6063 commercial aluminium alloy at constant current density of $1.5A/^dm2$ with various superimposed cathodic current ratio, in the range 0~33%, in the 11% $H_2SO_4$ with various concentration of $CuSO_4{\cdot}5H_2O$, in the range 0~75 g/l, without cathodic current are generally porous-type and no sign of Cu co-deposition appearance, suggesting that cathodic current is an important factor in the Cu co-deposition. Comparison with the anodic film thickness measurement results obtained from anodic film formed by direct anodic current and anodic film formed by superimposed various portion of cathodic current, the portion of cathodic current of input current increases with decrease of anodic film thickness and increases with increase of concentration of $Cu_2S{\;}and{\;}Cu_2O$ in the anodic film.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권9호
• /
• pp.1254-1262
• /
• 2014

Lymphoid enhancer binding factor 1 (LEF-1) is a member of the T-cell specific factor (TCF) family, which plays a key role in the development of breast endothelial cells. Moreover, LEF-1 gene has been identified as a candidate gene for teat number trait. In the present study, we detected two novel mutations (NC_010450.3:g. 99514A>G, 119846C>T) by DNA sequencing and polymerase chain reaction-restriction fragment length polymorphism in exon 4 and intron 9 of LEF-1 in Guanzhong Black, Hanjiang Black, Bamei and Large White pigs. Furthermore, we analyzed the association between the genetic variations with teat number trait in these breeds. The 99514A>G mutation showed an extremely significant statistical relevance between different genotypes and teat number trait in Guanzhong (p<0.001) and Large White (p = 0.002), and significant relevance in Hanjiang (p = 0.017); the 119846C>T mutation suggested significant association in Guanzhong Black pigs (p = 0.042) and Large White pigs (p = 0.003). The individuals with "AG" or "GG" genotype displayed more teat numbers than those with "AA"; the individuals with "TC" or "CC" genotype showed more teat numbers than those with "TT". Our findings suggested that the 99514A>G and 119846C>T mutations of LEF-1 affected porcine teat number trait and could be used in breeding strategies to accelerate porcine teat number trait improvement of indigenous pigs breeds through molecular marker assisted selection.