• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.147-156
• /
• 2007

This study offers a design procedure of optimum cable damper for multi-mode vibration control with nonlinear damper and also investigate the relation between mode and amplitude dependency. The proposed multi-mode damping index, which is defined as a energy loss ratio of cable potential, is a main component of optimization problem of optimum nonlinear damper. In order to include the amplitude dependency of nonlinear damper, it is assumed to exist three kinds of multi-mode patterns such as ambient vibration, support excitation and rain-win induced vibration. The optimum damper exponent depends on amplitude patterns. In case of ambient vibration, optimum factor is less than 0.5. In case of support excitation or rain-wind induced vibration is between 0.5 and 1.0. In this study, the effects of cable sag and inclination angle are included in the asymptotic design equation of damped cable structures.

• Advanced Composite Materials
• /
• 제16권3호
• /
• pp.195-206
• /
• 2007

Carbon nanofiber (CNF)/unsaturated polyester resin (UPR) was prepared by a solvent evaporation method, and the temperature dependency of electrical conductivity was investigated. The CNF/UPR composites had quite a low percolation threshold due to CNF having a larger aspect ratio and being well dispersed in the UPR matrix. The positive temperature coefficient (PTC) was found in the CNF/UPR composites and it showed stronger effect around the percolation threshold. The electrical resistance of the CNF/UPR composites decreased and had lower temperature dependency with increasing numbers of thermal cycles.

• 대한화학회지
• /
• 제7권4호
• /
• pp.271-276
• /
• 1963

TBPO-toluene 및 TOPO-toluene 系에 대한 4f 稀土類元素의 硝酸鹽의 溶媒濃度, 硝酸基濃度 및 原子番號(Z)의 變化에 따르는 分配率의 變化를 放射化學的으로 測定하였다. log Kd 對 Z의 關係는 Z=63∼64에서 交叉되는 二個의 直線으로 表示되면 溶媒濃度 依存度는 稀土類元素 全般에 걸쳐 一定하나 硝酸基濃度 依存度는 經稀土類元素와 重稀土類元素가 다르게 나타난다.

• 한국소음진동공학회논문집
• /
• 제17권9호
• /
• pp.785-796
• /
• 2007

This study offers a design procedure of optimum cable damper for multi-mode vibration control with nonlinear damper and also investigates the relation between mode and amplitude dependency. The proposed multi-mode damping index, which is defined as a potential energy loss ratio of cable vibration, is a main component of optimization problem of optimum nonlinear damper. In order to include the amplitude dependency of nonlinear damper, three types of multi-mode patterns such as ambient vibration, support excitation and rain-wind induced vibration are assumed. The optimum damper exponent depends on amplitude patterns. In case of ambient vibration, optimum factor is less than 0.5 and in case of support excitation or rain-wind induced vibration it is between 0.5 and 1.0.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.246-249
• /
• 2007

This study is concerned with deep drawability of magnesium sheets(AZ31B) at the warm conditions. Especially the dependency on forming speed has been investigated at the temperature of $200^{\circ}C$ and $300^{\circ}C$. Deep drawing test has been carried out at the temperature of $200^{\circ}C$ and $300^{\circ}C$. The die and blank holder are kept at test temperature by local heating and the punch is kept at room temperature by cooling technique. The magnesium sheets called AZ31B with the thickness of 0.5mm have been applied to deep drawing of circular cup. The drawability has been estimated at the conditions of forming speed (0.1, 1, 10 mm/sec). The results of deep drawing experiments show that the drawability is better at $300^{\circ}C$. Also the deep drawability is improved at the low speed(1mm/sec).

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.433-453
• /
• 2008

The equation of motion of a one way (vertical) spanning strip wall, as an assembly of two rigid bodies, is presented. Only one degree of freedom is needed to completely describe the wall response as the bodies are assumed to be perfectly rectangular and are allowed to rock but not to slide horizontally. Furthermore, no arching action occurs since vertical motion of the upper body is not restrained. Consequently, the equation of motion is nonlinear, with non constant coefficients and a Coriolis acceleration term. Phenomena associated with overburden to self weight ratio, motion triggering, impulsive energy dissipation, amplitude dependency of damping and period of vibration, and scale effect are discussed, contributing to a more complete understanding of experimental observations and to an estimation of system parameters based on the wall characteristics, such as intermediate hinge height and energy damping, necessary to perform nonlinear time history analyses. A comparison to a simple standing, or parapet, wall is developed in order to better highlight the characteristics of this assembly.

• 응용통계연구
• /
• 제28권4호
• /
• pp.603-620
• /
• 2015

국민연금은 각종 사회적 위험으로부터 국민을 보호하고 빈곤을 해소하는 대표적인 사회보장제도로, 노령인구의 삶의 질에 큰 영향을 미치고 있다. 그러나 급속도로 진행되고 있는 고령화와 출산율의 감소는 국민연금의 지속가능성을 위협하고 있다. 국민연금의 지속가능성을 점검하고 유지하기 위해 국민연금연구원에서는 5년마다 재정추계를 실시하고 있으며, 정부에서는 이를 바탕으로 국민연금의 지속가능성을 높이기 위해 수급액을 낮추고 있다. 하지만 OECD 국가 중 노인 빈곤율이 가장 높다는 현실을 고려할 때, 단순히 수급액을 낮추는 현재의 국민연금 제도 변화는 국민연금의 노후소득보장 기능을 훼손할 우려가 높다. 본 논문에서는 먼저 국민연금 재정추계에 대한 방법론을 인구, 가입자, 수급자 추계의 측면에서 논의하고 적립금 추계와 재정고갈연도를 점검할 것이다. 그리고 인구변수, 제도변수, 그리고 경제변수가 국민연금 적립금과 재정고갈연도에 미치는 영향을 파악하기 위해 민감도 분석을 할 것이며, 국민연금의 수급부담구조를 분석하여 세대내, 세대간, 소득계층간 공정성을 평가하도록 한다. 마지막으로 국민연금의 지속가능성을 연금 기여율과 수급률(소득대체율)의 관점에서 점검하며, 본 논문에서 새롭게 정의한 부양비(modied dependency ratio)지수를 통해, 부과식 제도의 도입이 없이 단순하게 기여율과 수급률의 조정으로는 국민연금의 개혁이 불가능하다는 것을 보여줄 것이다.

• 소성∙가공
• /
• 제18권5호
• /
• pp.410-415
• /
• 2009

Experimental and numerical studies were performed to examine the effect of material temperature and reduction ratio on friction coefficient during hot flat rolling. We carried out a single pass pilot hot flat rolling test at the temperatures range of $900{\sim}1200^{\circ}C$ and measured the spread of deformed material while reduction ratio varied from 20% to 40%. Materials used in this study were a high carbon steel and two alloy steels. The dimension of specimen used in hot rolling experiment was $50mm{\times}50mm{\times}300mm$. We performed a series of finite element simulation of the hot rolling process to compute the friction coefficient change in terms of steel grade and reduction ratio. Results showed that temperature dependency of friction coefficient is not noteworthy but the effect of reduction ratio on friction coefficient is quite large. For high carbon steel, friction coefficient at reduction ratio of 30% is lower than that at that of 20%. Meanwhile friction coefficient at reduction ratio of 40% was one and half times large compared with that at that of 20%. The effect of steel grade on friction coefficient was significant when reduction ration was large, e.g., 40%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.209-210
• /
• 2019

Current international concerns are the energy crisis due to climate change and depletion of fossil fuels due to global warming. Korea has a very high dependency on energy imports 93%. In Korea, 63% of the country is forested, and a power plant using wood biomass is being built in Korea. Biomass fly ash, a by-product of biomass energy generation, is now being discarded. There is little research to utilize discarded biomass fly ash. Therefore, this study aims to solve the environmental problems, develop new mixed materials, improve the quality and utilize the biomass fly ash, which is a by-product of the industrial waste. As a result of the experiment, the flowability decreased as the replacement ratio of biomass fly ash increased. As the replacement ratio of biomass fly ash decreased, the amount of air content.

• 대한화학회지
• /
• 제13권3호
• /
• pp.199-204
• /
• 1969

4f 및 5f 系列 元素의 溶媒抽出에 있어서 分配速度를 測定해 본 結果 4f 系列의 前半部와 後半部 間에 明白한 差異를 볼 수 있었다. 三價의 Am 및 Cm은 4f 系列의 前半部와 類似함을 알았다. 또한 分配率과 抽出溫度와의 關係를 檢討해 본 結果 抽出系에 따라 獨特한 增加 또는 減少傾向이 나타났으며 또한 Chelate 抽出系에 있어서는 原子番號 存在性이 있음을 알았다