• 한국항행학회논문지
• /
• 제23권1호
• /
• pp.8-19
• /
• 2019

조종사는 휴먼에러(human error)를 감소시키기 위한 방법들 중 하나로 체크리스트를 사용하여 항공의 안전에 도움이 되는 도구로 사용하고 있다. 하지만 복잡한 체크리스트는 경험이 부족한 학생 조종사들에게는 체크리스트가 작성된 본연의 목적과 다르게 안전에 위해 요인이 될 수 있다. 본 연구는 우선 학생조종사들이 사용하는 정상 체크리스트의 구성항목들을 단계 별로 살펴보았다. 이를 통해 체크리스트를 구성하는 요인들이 휴먼에러를 구성하는 요인들과 어떤 상관관계를 내포하는지 학생조종사들을 대상으로 한 사례연구를 통해 규명하고자 하였다. 탐색적 사례연구를 통해 다음과 같은 시사점을 제안하였다. 학생조종사들이 preflight inspection 체크리스트 점검을 수행함에 있어 기체에 대한 외부점검을 효율적으로 수행하도록 기체구조 또는 동력계통에 대한 전문지식 강화가 필요하다. 비행 시마다 조종사뿐만 아니라 해당 비행기의 정비 담당자가 외부점검을 실시하여 더블체크를 하는 재확인 절차를 통하여 안전을 증진시켜야 할 것이다.

• 한국항행학회논문지
• /
• 제22권6호
• /
• pp.522-529
• /
• 2018

FOD는 항공기에 위험을 줄 수 있는 위험요인을 지닌 각종 금속, 비금속의 이물질을 총칭한다. FOD는 활주로 및 유도로, 정비시설 등 특정구역 및 시간을 가리지 않고 발생하며, 항공기의 이동 및 이착륙 시 항공기의 안전에 치명적인 위험을 내재하고 있다. 이에 활주로 내 FOD 발생 시 신속하고 효과적인 탐지 및 제거가 필요하다. 최근 항공 안전 기술 개발의 일환으로 공항 내 활주로 이물질 자동 탐지 시스템 개발이 진행 중에 있다. 본 논문에서는 한서대학교 태안캠퍼스에서 EO/IR 카메라 및 레이더를 이용한 이물질 자동 탐지 실험을 진행하여 주야간 정상적으로 탐지되는 것을 확인하였다.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.67-78
• /
• 2015

The purpose of the establishment of corporation's Business Continuity Plan(BCP) is to maintain corporations' own business and establish the response plan in order to resume operation in a short time period when crisis situations occur due to natural disaster and human error. This study has presented all types of procedures and criteria which are needed to establish the airport crisis response system in order to maintain the business continuity by utilizing BCP technique. Basically the risk response procedures must be established in the process of (1) preparation stage, (2) plan development stage, (3) documentation stage, (4) test & maintenance stage. The guideline has been suggested that each stage must be carried out in the sequence of Policy & Planning Responsibility, Business Impact Analysis, Recovery Strategy & Plans, Emergency Plan & SOP, Training Awareness and Maintenance & Review

• 산업경영시스템학회지
• /
• 제46권2호
• /
• pp.47-56
• /
• 2023

This study identified the core competencies of aircraft maintenance quality engineers and compared the importance and retention of core competencies. Through literature research, 21 core competencies were derived in three areas of management technology, elemenal technology and collaboration technology, and a survey was conducted on the importance and retention of core competencies for 42 aircraft maintenance quality engineers. As a result of the survey, the importance of all core competencies of aircraft maintenance quality engineers is 3.95/5 on average, and the retention of all core competencies is 3.99/5 on average. 'Risk Management', 'Creating Document', 'Honesty/Moral' were identified as the most important competencies in each area, and 'Quality Management', 'Language', 'Honesty/Moral' were identified as the most possessed competencies in each area. An IPA (Importance-Performance Analysis) was performed to analyze the details. Through IPA, 'Risk Management' and 'Safety Management' were evaluated as having a low degree of retention compared to a high level of importance. Therefore, they were identified as a core competencies that need to be improved first. In addition, the characteristics of each core competency and the recognition level in the field were also identified. This study will be helpful in defining the roles and functions of aircraft maintenance quality engineers to improve flight quality and prevent aviation accidents.

• 웰빙융합연구
• /
• 제7권1호
• /
• pp.27-33
• /
• 2024

Purpose: This study investigates human error accidents in the Korean railway sector, emphasizing the need for systematic management to prevent such incidents, which can have fatal consequences, especially in driving-related jobs. Research design, data and methodology: This paper analyzed data from the Aviation and Railway Accident Investigation Board and the Korea Transportation Safety Authority, examining 240 human error accidents that occurred over the last five years (2018-2022). The analysis focused on accidents in the driving, facility, electric, and control fields. Results: The findings indicate that the majority of human error accidents stem from negligence in confirmation checks, issues with work methods, and oversight in facility maintenance. In the driving field, errors such as signal check neglect and braking failures are prevalent, while in the facility and electric fields, the main issues are maintenance delays and neglect of safety measures. Conclusions: The paper concludes that human error accidents are complex and multifaceted, often resulting from a high workload on engineers and systemic issues within the railway system. Future research should delve into the causal relationships of these accidents and develop targeted prevention strategies through improved work processes, education, and training.

• Journal of Ceramic Processing Research
• /
• 제20권5호
• /
• pp.464-469
• /
• 2019

In this study, the electrical conductivity of multi-walled carbon nanotubes (MWCNTs) and polyethylene synthesized by an extrusion process was evaluated. The MWCNTs used exhibited differences in their dispersion characteristics depending on the type of catalyst or synthesis gas used. Thus, the choice of catalyst or synthesis gas significantly affect the physicochemical state of the final MWCNTs and MWCNT-based composites. In this investigation, the characteristics of MWCNTs were analyzed in four cases by introducing ethylene and propylene gas to each catalyst synthesized using deposition precipitation and spray drying methods. The MWCNT-based composites synthesized using the catalyst prepared by deposition precipitation and the ethylene synthesis gas showed the best electrical conductivity. In principle, the morphologies of the MWCNTs indicate that the smaller the aggregate size and bundle thickness, the better the electrical conductivity of the MWCNT composites. This implies that the network is well-formed.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.455-460
• /
• 2018

Chromium plating is a common surface treatment technique extensively applied in industry due its excellent properties which include substantial hardness, abrasion resistance, corrosion resistance, surface color, and luster. In this study, the effect of PTFE on corrosion behavior of Cr-P plating, low carbon steel substrates are electroplated in Cr(III) baths without and with PTFE. Trivalent chromium carbon plating was electroplated from trivalent chromium sulfate-based baths with different PTFE dispersion contents. The study focused on the microstructure, PTFE content, roughness, and corrosion resistance of the Cr-P-PTFE composite plating. Scanning electron microscopy and atomic force microscopy images showed a smoother plating and a decrease in the surface roughness of the electrodeposited. The results demonstrate that PTFE eliminates the cracks within plating by reducing internal stress. Therefore, the corrosion resistance of Cr-P-PTFE composite platings were better than that of Cr-P alloy platings.

• 항공우주시스템공학회지
• /
• 제15권2호
• /
• pp.1-9
• /
• 2021

In this paper, a thickness compensation function is introduced to consider the shear deformation and warping effect resulting from increased thickness in the composite multi-cell wing box. The thickness compensation function is used to perform the structure optimization of the multi-cell. It is determined by minimizing the error of an analytical formula using solid mechanics and the Ritz method. It is used to define a structural performance prediction expression due to the increase in thickness. The parameter is defined by the number of spars and analyzed by the critical buckling load and the limited failure index as a response. Constraints in structural optimization are composed of displacements, torsional angles, the critical buckling load, and the failure index. The objective function is the mass, and its optimization is performed using a genetic algorithm.

• Journal of Ceramic Processing Research
• /
• 제20권4호
• /
• pp.388-394
• /
• 2019

In this study, high-purity single-walled carbon nanotubes (SWCNTs) were prepared by removing the unreacted metal constituents and amorphous carbon impurities using a post-annealing process. Unlike conventional thermal processing techniques, this technique involved different gas atmospheres for efficient removal of impurities. A heat treatment was conducted in the presence of chlorine, oxygen, and chlorine + oxygen gases. The nanotubes demonstrated the best characteristics, when the heat treatment was conducted in the presence of a mixture of chlorine and oxygen gases. The scanning electron microscopy, transmission electron microscopy, ultraviolet absorbance, and sheet resistance measurements showed that the heat treatment process efficiently removed the unreacted metal and amorphous carbon impurities from the as-synthesized SWCNTs. The high-purity SWCNTs exhibited improved electrical conductivities. Such high-purity SWCNTs can be used in various carbon composites for improving the sensitivity of gas sensors.

• 한국융합학회논문지
• /
• 제9권10호
• /
• pp.277-283
• /
• 2018

본 논문은 항공전자 부분품의 기능시험을 위해 사용하는 전용 자동시험체계(ATS)를 범용 자동시험체계로 TPS를 이식하는 연구이다. 항공전자 부분품의 성능시험을 위해 사용하는 전용 자동시험체계는 적게는 수천만원에서 많게는 수백억원에 이르는 고단가로, 항공전자 정비 사업을 영위하는 국내 기업에서는 초기 투자비용에 많은 어려움이 있어 사업 확장의 장애 요인이 되고 있다. 이러한 이유로, 본 논문에서는 전용 자동시험체계를 사용하는 정비대상품인 A항공기에 사용되는 발전기 내의 Wire-Harness를 범용 자동시험체계로 사용하도록 TPS를 이식하는 절차에 대해 연구하였다. 제안한 연구를 통해 전용에서 범용으로 TPS 이식 후 평가 및 검증을 수행한 결과 100% 성능검증을 확인하였으며, 이것은 절차의 표준화를 거쳐 무한한 확장 가능성이 있어 적은 투자로 항공전자 MRO사업의 확장을 원하는 국내 기업들에 큰 도움을 줄 수 있을 것이다.