• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.4
• /
• pp.250-257
• /
• 2020

Objectives: Palatal infiltration is the most painful and uncomfortable anesthesia technique for maxillary impacted third molar surgery (MITMS). This approach could cause patients distress and aversion to dental treatment. The aim of this study was to evaluate the anesthetic efficacy of a buccal infiltration injection without a palatal injection in MITMS. Materials and Methods: This prospective research study was a crossover split mouth-randomized controlled trial. Twenty-eight healthy symmetrical bilateral MITMS patients (mean age, 23 years) were randomly assigned to two groups. Buccal infiltration injections without palatal injections were designated as the study group and the buccal with palatal infiltration cases were the control group, using 4% articaine and 1:100,000 epinephrine. The operation started after 10 minutes of infiltration. Pain assessment was done using a visual analogue scale and a numeric rating scale after each injection and extraction procedure. Similarly, the success rate, hemodynamic parameters, and additional requested local anesthetic were assessed. Results: The results showed that the pain associated with local anesthetic injections between both groups were significantly different. However, the success rates between the groups were not significantly different. Postoperative pain was not significant between both groups and a few patients requested an additional local anesthetic, but the results were not statistically significant. For hemodynamic parameters, there was a significant difference in systolic pressure during incision, bone removal, and tooth elevation. In comparison, during the incision stage there was a significant difference in diastolic pressure; however, other steps in the intervention were not significantly different between groups. Conclusion: We concluded that buccal infiltration injection without palatal injection can be an alternative technique instead of the conventional injection for MITMS.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.417-422
• /
• 2016

PURPOSE. The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS. Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples ($8{\times}8{\times}1mm$) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (${\alpha}=.05$). RESULTS. The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (P<.05). Staining resistances of E and CS were significantly higher than those of L and ME (P<.05). CONCLUSION. Ceramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.623-629
• /
• 1999

The definition of fascial spaces are latent spaces between fascial planes. If infections which spread from dental origin to soft tissue are mild, they are restricted by fascial planes. But, when infections are severe, fascial spaces are often used as a natural pathway which spread to the deep cervical region. If they are not treated at early stage, they may result in the fatal complications as followings; airway obstruction, septicemia, cerebral abscess, and thrombophlebitis etc. The early treatment of fascial space abscess is very important for young children. These case reports present the successful result of fascial space abscess treatment through intracanal drainage without surgical excision. It is proven that the treatment through intracanal drainage has some benefits to the surgical excision, which are as follows: 1) It is economic to the patients or their parents avoiding admission. 2) The treatment procedure is more simple. 3) Childrens can avoid the fearful environment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.269-281
• /
• 2007

Fluoric acid etching is an essential procedure in cementation of reinforced ceramics to tooth surface. But there have been few studies about the changes of surface structure and flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to the etching time. The objectives of this study were to examine the surface structure changes and the difference in biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to various etching times. Sixty one disk-shaped specimens of IPS $Empress^{(R)}$ 2 ceramic($14mm{\times}1.2mm$) were fabricated for the biaxial flexural strength test and SEM analysis according to the manufacturer's recommendations. Sixty specimens were divided into 6 groups(n=10) according to the time of HF acid etching(0, 20, 180 and 300s)and silane/resin cement application. Each disk was loaded using a piston-on-3 ball biaxial configuration in a universal testing machine. The failure loads(N) were recorded, and the biaxial flexural strength for each disk was calculated. A one-way analysis of variance and independent t-test on transformed fracture strength data were used to determine significant differences between groups. The groups of no cementation showed a trend toward progressive weakening with increasing the etching time. However, this was not statistically significant at p=0.05 level. The groups of resin cementation exhibited no apparent trend in their mean strength values. SEM photomicrographs showed very different results of etching. Within the conditions of this study, alteration of surface topography by acid etching does not have a deleterious effect on the biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.315-323
• /
• 2014

Excessive teeth abrasion causes pathologic changes of oral environment and masticatory system due to decrease in occlusal vertical dimension. When establishing new occlusal plane and recovering vertical dimension, accurate diagnosis and analysis are essential. In this case, after appropriate centric relation in elevated vertical dimension was taken using Gothic arch tracer, full mouth rehabilitation was performed. A 70-year-old male patient had the chief complaint that he could not eat due to teeth wear. He showed generalized teeth wear and decreased vertical dimension. Elevation of vertical dimension was planned by model analysis. According to increased vertical dimension, centric relation was recorded using Gothic arch tracer and temporary prostheses were applied. Appropriate occlusion was established by temporary prostheses for 4 months. Final prostheses were fabricated using vertical dimension adapted by temporary prostheses. Through this procedure, satisfactory outcomes were achieved both in functional and esthetic aspects.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.169-175
• /
• 1984

This study was undertaken to obtain the average canal length of upper & lower anterior teeth which was important in canal length measuring procedure of endodontic treatment. It was based upon 827 out-patients who had endodontic treatment on their upper & lower anterior teeth at the Department of Operative Dentistry, Dental Infirmary, Yonsei Medical Center from February, 1978 to June, 1984. The 1249 teeth of these patients were devided into sex and age groups. The root canal length of these teeth were measured. The following results were obtained; 1. The mean root canal length of upper & lower anterior teeth were as follows; Upper central incisors : 21.8mm Upper lateral incisors : 21.0mm Upper canines : 24.1mm Lower central incisors : 18.6mm Lower lateral incisors : 19.9mm Lower canines : 22.6mm 2. There was no significant difference in root canal length between sex. (P > 0.05) 3. There was no significant difference in root canal length between age groups. (p > 0.05) 4. The distribution of upper central incisors showed the highest distribution followed by upper lateral incisors and lower central incisors between 10 to 40 year old age groups, and there was no signigicant difference in the rest of the age groups. There was no significant difference in sex distribution, which was 49.5% for males and 50.4% for females. The number of the upper anterior teeth was 74.3% of all the specimens and the lower anterior 25.7%, and 40.6% of all the specimens were upper central incisors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.440-448
• /
• 2012

Purpose: The purpose of this study was to evaluate marginal bone loss of the alveolar crest on implants with or without guided bone regeneration and variables that have influenced. Methods: The clinical evaluation were performed for survival rate and marginal bone loss of 161 endosseous implants installed with guided bone regeneration (GBR) in 83 patients from September 2009 to October 2010 in relation to sex and age of patients, position of implant, implant system, length and diameter of implant. Study group (n=42) implant with GBR procedure, control group (n=41) implant without GBR technique. Simultaneous GBR approach using resorbable membranes combined with autogenous bone graft or freeze-dried bone allograft or combination. Radiographic examinations were conducted at healing abutment connection and latest visit. Marginal bone level was measured. Results: Mean marginal bone loss was 0.73 mm in study group, 0.63 mm in control group. Implants in maxillary anterior area (1.21 mm) were statistically significant in study group (P<0.05), maxillary posterior area (0.81 mm) in control group (P<0.05). Mean marginal bone loss 1.47 mm for implants with diameter 3.4 mm, 0.83 mm for implants of control group with diameter 4.0 mm (P<0.05). Some graft materials showed an increased marginal bone loss but no statistically significant influence of sex, implant type or length. Conclusion: According to these findings, this study demonstrated the amount of marginal bone loss around implant has maintained a relative stable during follow-up periods. We conclude that implants with GBR had similar survival rate and crestal bone level compared with implants in native bone.

• Imaging Science in Dentistry
• /
• v.33 no.1
• /
• pp.35-41
• /
• 2003

Purpose: To aid in determining the volume of graft bone required before a maxillary sinus lift procedure and compare the alveolar bone height measurements taken by panoramic radiographs to those by CT images. Materials and Methods : Data obtained by both panoramic radiographs and CT examination of 25 patients were used in this study. Maxillary sinus volumes from the antral floor to heights of 5 mm, 10 mm, 15 mm, and 20 mm, were calculated. Alveolar bone height was measured on the panoramic images at each maxillary tooth site and corrected by magnification rate (PBH). Available bone height (ABH) and full bone height (FBH) was measured on reconstructed CT images. PBH was compared with ABH and FBH at the maxillary incisors, canines, premolars, and molars. Results: Volumes of the inferior portion of the sinuses were 0.55 ± 0041 ㎤ for 5 mm lifts, 2.11 ± 0.68 ㎤ for 10 mm, 4.26 ± 1.32 ㎤ for 15 mm, 6.95 ± 2.01 ㎤ for 20 mm. For the alveolar bone measurement, measurements by panoramic images were longer than available bone heights determined by CT images at the incisor and canine areas, and shorter than full bone heights on CT images at incisor, premolar, and molar areas (p<0.001). Conclusion: In bone grafting of the maxillary sinus floor, 0.96 ㎤ or more is required for a 5 mm-lift, 2.79 ㎤ or more for a 10 mm-lift, 5.58 ㎤ or more for a 15 mm-lift, and 8.96 ㎤ or more for a 20 mm-lift. Maxillary implant length determined using panoramic radiograph alone could result in underestimation or overestimation, according to the site involved.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.544-551
• /
• 2000

A fabrication method of inner and outer crown using CAD/CAM is presented. The information of abutment teeth is transferred to a computer through a 3-dimensional scanner. A Konus inner and outer crown is designed on a computer and a real crown is machined based on this design using CAM. This method can save laboratory time and reduce inaccuracies compare to conventional casting procedure. A stone model with six prepared abutment teeth from a patient was used in this study. Three dimensional information from the model was transferred to a computer using a contact type 3-dimensional scanner with a $25{\mu}m$ accuracy. All margins were identified on a computer image where there is a change in surface taper of a model. To provide a cement space, the image of a inner sur face of a Konus inner crown was duplicated $25{\mu}m$ apart from the surface of a prepared abutment teeth image. The cement space was $20{\mu}m$ at the cervical margin. All Konus crowns were machined with a $10{\mu}m$ accuracy. It was concluded that this method can reduce working-time for the laboratory process and increase accuracy. A further research is required to make a simplified process for a more complex prosthesis.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.461-474
• /
• 1993

This study was performed to estimate the effect of plaque control on the progress of the repair pattern of the alveolar bone surface after bone surgery. In this experiment six mongrel dogs were used, four of them were as experimental group and others were as control. In the case of experimental group, dental floss ligature was tied over the neck of crown for permiting of plaque accumulation during one week before surgery and oral hygiene procedures were not performed. In control group, all the surgical intervention was done as same procedure with experimental except oral hygiene program. After surgery plaque was controlled during one week with using the chlorhexidine brushing. Animals were sacrificed at 1,2,4,6 weeks after osseous surgery. The results were as follows : 1. The alveolar bone defects were covered with regenerated epithelium at one week, matrix change of granulation tissue on subcutaneous area was observed, and new bone formation was initiated from the surface of the bone defects. 2. The connective tissue arrangement revealed more dense, new bone formation by osteoblasts was active at 2 weeks and proliferation of gingival epithelium and alveolar bone tissue were evident at 4 weeks, and almostly recovered to normal condition at 6 weeks. 3. In experimental group, inflammatory reaction was persistent in early stage and bone repair was delayed compared to control group. 4. In control group, matrix change of granulation tissue was initiated from one week, regeneration of gingival epithelium and maturation of subcutaneous conective tissue and new bone formation were evident at 2 weeks, so almost normal bone regeneration was observed at 4,6 weeks.