• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.151-156
• /
• 2016

Purpose: The dental implant should be enough to endure chewing load and it's required to have efficient design and use of implant to disperse the stress into bones properly. This study was to evaluate the stress distribution on a supporting bone by lengths and diameters of the implant fixture. Methods: The modeling and analysis of stress distribution was used for the simple molar porcelain crown model by Solidworks as FEM program. It was designed on applying with tightening torque of 20 Ncm of a abutment screw between a cement retained crown abutment and a fixture. The fixtures of experimental model used 10, 13mm by length and 4, 5mm by diameter. A external vertical loading on the two buccal cusps of crown and performed finite element analysis by 100 N. Results: The maximum von Mises stress(VMS) of all supporting bone models by fixture length and diameter were concentrated on the upper side of supporting compact bone. The maximum stress of each model under vertical load were 164.9 MPa of M410 model, and 141.2 MPa of M413 model, 54.3 MPa of M510 model, 53.6 MPa of M513 model. Conclusion: The stress reduction was increase of fixture's diameter than it's length. So it's effective to use the wider fixture as possible to the conditions of supporting bone.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.4
• /
• pp.577-584
• /
• 2014

Objectives : The purpose of the study is to investigate the relationship between the dental fear, self-esteem, and self-regulation in oral health quality of life in the adolescents. Methods : A self-reported questionnaire was filled out by the 826 adolescents from March 5 to 16, 2012 in J city. Results : Higher self-esteem(${\beta}$=0.186) was closely related to higher oral health-related quality of life(p<0.001). Dental fear had indirectly influenced on self-esteem and self-regulation, and had significant differences(p<0.05). The model showed that dental fear and oral health-related quality of life were a suitable structural model due to higher fit indices. Conclusions : Self-esteem and self-regulation were the important variables to oral health-related quality of life. There was a close relationship between the dental fear and oral health-related quality of life.

• Journal of dental hygiene science
• /
• v.15 no.1
• /
• pp.67-76
• /
• 2015

This study aims to determine the factors affecting the dental service utilization of adults. The subjects in this study were 455 adults, whom a survey was conducted form May 7 to June 7, 2013. Statistical verification conducted through PASW Statistics was 18.0. The difference in the distribution of independent variables related with the dental service utilization was verified with chi-square test. Relevant factors were determined using Hierarchical logistic regression analysis. Model I is predisposing factor, Model II is predisposing factor and enabling factor. Model III is predisposing, enabling, need factor. Andersen model factor which infuences dental service utilization of adults resulted that use dental floss (OR, 2.32; CI, 1.39~3.86), use electric toothbrush (OR, 2.98; CI, 1.0~8.89), use interdental brush (OR, 2.55; CI, 1.36~4.78), self-efficacy (OR, 0.68; CI, 0.48~0.96), barriers (OR, 1.45; CI, 1.04~2.04). Predisposing factor and need factor were found to be determinants for dental service utilization in adult.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.4
• /
• pp.695-705
• /
• 2012

Objectives : The purpose of this study is to evaluate the appearance of having relationship between the exposure to lead and cadmium and the dental caries targeting adults in the Republic of Korea. Methods : The study was designed as a cross-sectional study, using the data of the Fourth Korea National Health and Nutrition Examination Survey. The subjects as 1,966 people, who were confirmed the appearance of dental caries among 1,991 people of having been offered the heavy-metal concentration in blood. Statistical analysis was conducted using SPSS 19.0, according to complex sampling design. Results : As a result of multi-variate analysis on factors of dental caries, in Model I without correction, the gender, age, educational level, appearance of lifelong smoking, daily toothbrushing frequency, appearance of using dental floss, and subjective oral health status were recognized as important factors. In Model II with correction of gender and age, the educational level, daily toothbrushing frequency, and subjective oral health status were recognized as statistically significant factors. In Model III with correction of all factors, the gender, age, educational level, appearance of using dental floss, and subjective oral health status were functioning as statistically significant factors. As a result of statistically analyzing relationship between the exposure to lead and cadmium and the dental caries targeting adults, it was analyzed that there is no significant correlation. However, in case of lead, the tendency of being grown the cross ratio of dental caries could be examined in model I, which didn't correct disturbance factor, model II, which corrected gender and age, and model III, which corrected all variables of disturbance factor. Conclusions : The exposure to lead and cadmium was indicated to have no relationship with adults' dental caries. However, a continuous research of relationship was considered to be necessary by using Korea National Health and Nutrition Examination Survey, which is surveyed in the future.

• Journal of Technologic Dentistry
• /
• v.36 no.3
• /
• pp.159-164
• /
• 2014

Purpose: The purpose of this study was analysis of quality of fixed prostheses fabricated by dental CAD/CAM system. Methods: The ten same cases of stone models were manufactured by dental scannable model, and stone models were scanned using the dental scanner for changing digital model. Ten digital models were completed. The design of zirconia core for zirconia based all-ceramic crown was conducted by the dental CAD program. The samples were fabricated using the pre-sintered zirconia block by dental milling machine. Marginal gaps were analyzed using by silicone replica technique at the eight parts for quality analysis of samples. One-way ANOVA was used for statistical analysis(${\alpha}=0.05$). Results: The mean for marginal gaps were $93.2{\sim}99.1{\mu}m$ at the eight parts. One-was ANOVA didn't show significant differences(p=0.089). Conclusion: The fixed dental prostheses fabricated by dental CAD/CAM were within clinically acceptable range.

• Journal of Preventive Medicine and Public Health
• /
• v.48 no.4
• /
• pp.195-202
• /
• 2015

Objectives: Receiving proper dental care plays a significant role in maintaining good oral health. We investigated the relationship between regional deprivation and dental care utilization. Methods: Multilevel logistic regression was used to identify the relationship between the regional deprivation level and dental care utilization purpose, adjusting for individual-level variables, in adults aged 19+ in the 2008 Korean Community Health Survey (n=220 258). Results: Among Korean adults, 12.8% used dental care to undergo examination and 21.0% visited a dentist for other reasons. In the final model, regional deprivation level was associated with significant variations in dental care utilization for examination (p<0.001). However, this relationship was not shown with dental care utilization for other reasons in the final model. Conclusions: This study's findings suggest that policy interventions should be considered to reduce regional variations in rates of dental care utilization for examination.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.6
• /
• pp.1082-1089
• /
• 2012

Objectives : The aim of this study was to determine the accuracy of digitized stone models, impression materials compared to the master model and the reliability of the computer aided analysis. Methods : A master model(500B-1, Nissin dental product, Japan) with the prepared lower full arch tooth was used. Ten vinyl polysiloxane impressions(Examix$^{(R)}$, GC Industrial Corp, Japan) of master model were taken and type IV stone(aesthetic-base gold$^{(R)}$, Dentona, Germany) were poured in stone models. The linear distance between the reference points were measured and analyzed on the Delcam Copycad$^{(R)}$(Delcam plc, UK). The t-student test for paired samples was used for statistical analysis. Results : The mean differences to master model for stone model and impression material were 0.11~0.19mm, and 0.19~0.29mm, respectively. There were statistical differences in dimensional accuracy for full arch impression between master model and stone model/impressions(p<.05). Conclusions : Two different scanning methods showed clinically acceptable accuracy of full arch digital impression produced by them. These results will have to be confirmed in further clinical studies.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.1
• /
• pp.107-116
• /
• 2020

Objectives: This study applied the co-orientation model to investigate the degree to which dental hygienists and dentists recognize the efficiency of dental hygienists' non-surgical periodontal therapy work; the basic data can be provided as a systematic arrangement that can be applied and extended to dental clinics to raise mutual understanding. Methods: Independent sample t-tests, one-way ANOVA, and paired t-tests were conducted with a total of 888 subjects (530 dental hygienists and 358 dentists) using SPSS Statistics 22.0. Results: The analysis showed that, dental hygienists had higher recognition of the efficiency of their work (p<0.001) than dentists, with respect to all items(p>0.05). With respect to subjective agreement, dental hygienists estimated lower recognition among dentists than other dental hygienists and dentists estimated higher recognition among dentists than dental hygienists. With respect to accuracy, dentists' estimation was lower than the actual recognition among dental hygienists and dental hygienists' estimation was higher than the actual recognition among dentists in all cases except the efficiency of dental hygienists' patient education work and constant learning. Conclusions: There was wide gap between dental hygienists and dentists in recognition of the efficiency of dental hygienists' non-surgical periodontal therapy work. Actions must be taken to raise mutual understanding between dental hygienists and dentists regarding dental hygienists' non-surgical periodontal therapy work, to spread this recognition throughout the dental industry, and to implement systematic support at dental clinics.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.4
• /
• pp.649-659
• /
• 2015

Objectives: The purpose of the study is to investigate the musculo-skeletal pain prevalence and severity in the dental hygienists based on PRECEDE model. Methods: A self-reported questionnaire was completed by 483 dental hygienists in Gwangju from September 13 to October 12, 2013. Data were analyzed by frequency analysis, chi-square test, t-test, and multiple logistic regression analysis using SPSS 18.0 program. Musculo-skeletal pain severity was classified from 1 to 5 by PRECEDE model. The questionnaire consisted of six questions of the general characteristics of the subjects, one question of musculo-skeletal pain prevalence, one question of body part musculo-skeletal pain prevalence, one question of subjective health status, three questions of activities of daily living, six questions of working environment, one question of musculoskeletal system diseases knowledge, two questions of social support, two questions of education experience and data use method, and five questions of necessity of health education. Results: The prevalence rate of musculo-skeletal pain within a year was 83.9% and 22.8% of the dental hygienists complained of severe pain. The odds ratio of moderate pain severity was 1.99(95% CI, 1.10-3.60) and the odds ratio of unhealthiness was 3.27 (95% CI, 1.35-7.94). The odds ratio of pain severity in those working for 4-6 years was 0.21(95% CI, 0.08-0.57). The odds ratio of pain severity in those practicing 6-10 scaling cases per day was 0.33(95% CI, 0.17-0.65). The odds ratio of pain severity in wrist turning and bending was 3.56(95% CI, 1.19-10.62). Conclusions: The muscolu-skeletal pain severity in the dental hygienists was closely associated with subjective health condition, work duration, the number of scaling practice activity, and a treatment posture. Regular physical checkup for the dental hygienists will improve the musculo-skeletal pain due to scaling practice.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.369-377
• /
• 2012

Purpose: The aim of study was to compare the dimensional stability of digitized dental stone replica using different color of gypsum materials using a white light scanner with three-dimensional software. Methods: A master model(500B-1, Nissin dental product, Japan) with the prepared lower full arch tooth was used. Several type IV stones(white, yellow, green) were used for 30 stone casts(10 casts each) duplicated a master model of mandible. The master model and the replicas were digitized with the non-contacting white light scanner to create 3-dimensional digital models. The linear distance between the reference points were measured and analyzed on the Delcam Copycad$^{(R)}$(Delcam plc, UK) 3D graphic software. One-way analysis of variance(ANOVA) combined with a Tukey multiple-range test were used to analysis the data(${\alpha}$=0.05). Results: There were considerable differences in mean values between gypsum materials within each color(white, yellow, green), and this difference was statistically significant, p=0.001. Conclusion: Digitization of dental materials on optical scanner was affected by color. Three different color of gypsum materials showed clinically acceptable accuracies of full arch digital model produced by them. Besides, these results will have to be confirmed in further clinical studies.