• 대한치과보철학회지
• /
• 제14권1호
• /
• pp.11-16
• /
• 1976

Casts are often transferred to the articulator by arbitrary means, because the method of locating the true hinge axis point thought to be a complicated and time consuming procedure, and because the importance and significance of the true hinge axis in the construction of dental prosthesis is not sufficiently understood. In this report, the author constructed the hinge axis locator and determined the variations in location of the true hinge axis points from the location of the hinge axis point determined by arbitrary means. For this report, the procedure was followed on 50 persons with normal occlusion and sound T.M.J. function, so 100 true hinge axis points were recorded and compared with the arbitrary hinge axis point. The results obtained were as follows. 1. The mean distance from the arbitrary hinge axis point to the true hinge axis point was as follows. Right; (O)5.17mm., (V)3.44mm., (H)3.55mm.. Left; (O)5.63mm., (V)3.95mm., (H)3.51mm.. 2. The percentage of true hinge axis points classified at intervals of 2mm was as follows. 0-2mm; 4%, 2-4mm; 21%, 4-6mm; 37%, 6-8mm; 26%, 8-10mm; 10%, Over 10mm; 2%. And only 50% of the 100 true hinge axis points were located within a 5mm. radius of the arbitrary hinge axis point. 3. Instead of transferring the casts to the articulator by arbitrary means, the careful location of the true hinge axis points is recommended to avoid potential sources of error in mounting casts.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제25권4호
• /
• pp.295-303
• /
• 1999

Presented in this paper are the experimental results that measure rapid prototyping (RP) errors in 3D medical models. We identified various factors that can cause dimensional errors when producing RP models, specifically in maxillofacial areas. For the experiment, we used a human dry skull. A number of linear measurements based on landmarks were first obtained on the skull. This was followed by CT scanning, 3D model reconstruction, and RP model fabrication. The landmarks were measured again on both the reconstructed models and the physical RP models, and these were compared with those on dry skull. We focused on major sources of errors, such as CT scanning, conversion from CT data to STL models, and RP model fabrication. The results show that the overall error from skull to RP is $0.64{\times}0.36mm(0.71{\times}0.66%)$ in absolute value. This indicates that the RP technology can be acceptable in the real clinical applications. A clinical case that has applied RP models successfully for treatment planning and surgical rehearsal is presented. Although the use of RP models is rare in the medical area yet, we believe RP is promising in that it has a great potential in developing new tools which can aid diagnosis, treatment planning, surgical rehearsal, education, and so on.

• 한국멀티미디어학회논문지
• /
• 제14권11호
• /
• pp.1373-1382
• /
• 2011

본 논문에서는 사용자가 스스로 미소 훈련을 할 수 있도록 자동으로 미소를 분석하는 시스템을 제안한다. 제안된 시스템은 입력 영상으로부터 AdaBoost 알고리즘을 통해 얼굴 영역을 검출한 다음, ASM(active shape model)을 이용하여 생성된 얼굴 형태 모델을 이용하여 얼굴의 특징을 찾는다. 얼굴 특징을 찾은 다음에는 미소 분석에 필요한 입술 라인과 개별 치아 영역을 추출한다. 미소의 정도를 분석하기 위해 입술 라인과 치아와의 관계 판별이 필요한데, 이를 위해 치아 영상에 대해 2차 미분을 실행한 후, 세로축과 가로축에 히스토그램 프로젝션 방법을 이용하여 개별적인 치아 영역을 찾는다. 입술 라인과 개별 치아 영역에 대한 분석을 통해 사용자의 미소 정도를 자동으로 분석하고 결과를 실시간으로 사용자가 직접 확인할 수 있게 해 준다. 본 논문에서 개발된 시스템은 기존에 치과 병원에서 이루어진 미소 훈련을 위한 미소 평가 결과와 8.6% 이하의 오차를 보였으며 사용자가 혼자서도 미소를 훈련하는데 활용할 수 있는 것으로 분석되었다.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제18권2호
• /
• pp.145-153
• /
• 2007

Objectives: This study was focused on the influence of chronic aircraft noise exposure on children's continuous performance, intelligence and reading skill. Methods: We enrolled 586 children in 4-6th grade of 7 primary schools near air base in Korea. Continuous performance was measured using the computerized ADS program. We analyzed 477-512 children on the visual continuous performance test, auditory continuous performance test, intelligence test, and reading and the vocabulary test. Intelligence was measured using vocabulary, digit span, block design, and digit symbol tests of K-WISC-III. Results: The commission error and variability deviation of auditory continuous performance test and reading test were significantly higher among children in schools with the helicopter noise and the fighting plane noise compared to children in the low noised schools. Conclusion: There was a possibility that chronic aircraft noise exposure was associated with impairment of the school performance. The result of our study also shows chronic aircraft noise was associated with reading ability.

• 구강회복응용과학지
• /
• 제24권2호
• /
• pp.157-168
• /
• 2008

네 종류의 토크 조절기(전자 토크 조절기($Br{\aa}nemark$), 토크 최대값 제한 장치(Pentaborn), 토크 표시 장치(ITI), 콘트라앵글 토크장치(Anthogyr))를 이용하여 나사의 조임 및 풀림 토크값을 측정하여 적정 토크 값과 토크 조절기를 통해 적용되는 실제 토크값에 대한 차를을 측정하여 토크 조절기의 정확도를 비교, 분석하였다. 풀림토크의 평균값 및 최대값과 최소값을 살펴 본 결과 Pentaborn과 같은 토크 최대값 제한 장치의 정확도가 다른 세 종류의 토크 조절기에 비해 우수한 것으로 나타났으며 15회 정도의 조임과 풀림은 큰 영향을 미치지 않지만 그 이상의 조임과 풀림은 정확한 토크 조절에 나쁜 영향을 미치는 것을 알 수 있었다. 그러므로 토크 조절기가 일정하고 정확한 토크값을 반복적으로 유지하는지 확인 및 교정하면서 임상적으로 적용해야 할 것으로 사료된다.

• 치과방사선
• /
• 제6권1호
• /
• pp.27-31
• /
• 1976

A study was performed to investigate the size of pharynegeal cavity and sexual differences between Korean adult male and female by introducing linear analysis of the lateral cephalogram. The radiograms were composed of 46 adult males aged 24.64 and 52 adult females aged 22.74 respectively. In order to study and measure the pharyngeal area the following skeletal landmarks were selected: S, N, A, Ptm, B, H, H', M, S' N, FH and CV, and the angle CV-FH was measured to provide a factor for correction of error resulting from improper head positioning of subjects, especially in the relative positions of A and H, while radiography. All points to be measured were projected at right angles to the Frankfort plane. For the purpose of measuring the anteroposterior dimensions of pharyngeal cavity the distances were measured in A-Ptm, A-S, S-Ptm and CV-H, and vertical measurements were made in SN-A, SN-PNS, SN-H' and M-H'. The obtained results were as follows: 1. The pharyngeal cavity is broader in the vertical than in the anteroposterior diameter in both sex and the maxium sexual differences were showed in the distances between SN and H', and minimal sexual differences in the distances between S and Ptm. 2. In general, the measurements of male were larger than those of female in the anteroposterior dimensions of pharyngeal cavity, but the distances bet-ween A and S, between CV and H showed significant sexual differences when evaluated statistically. 3. All of the measurements were larger in male than in female in vertical dimensions of pharyngeal cavity, and there were statistical significances of sexual differences in all variables.

• Journal of Periodontal and Implant Science
• /
• 제30권2호
• /
• pp.429-442
• /
• 2000

Based on current evidence in the literature, it is known that endotoxin is a weakly adherent surface phenomenon and that power-driven instruments can be used to accomplish definitive root detoxification and maximal wound healing without overinstrumentation of root and without extensive cementum removal. And one of the newly developed curette tips used with low power of piezoelectric ultrasonic scaler, is effective to remove calculus and not to remove the excessive cementum. The purpose of this study is therefore, to assess the influence of ultrasonic power and various working parameters on root substitute removal when instrumentation is performed with the curette tip on piezoelectric ultrasonic scaler. This study assessed defect depth, width and area resulting from instrumentation using a piezoelectric ultrasonic scaler with a curette type tip in vitro to acrylic resin block as a root substitute. The working parameters was standardized by the sledge device which controls lateral force(0.5 N, 1 N, 2 N) and instrumentation time(5 sec, 10 sec, 20 sec) and power setting was adjusted 0,2,4,8 in P mode. Power setting had the greatest influence on defect depth compared to lateral force and instrumentation time(standardized regression parameter estimates${\pm}$standard error, $0.37{\pm}0.02$, $0.19{\pm}0.02$, $0.07{\pm}0.02$). The effects on defect area also greatest for power setting($0.57{\pm}0.03$) compared to lateral force and instrumentation time($0.33{\pm}0.03$, $0.12{\pm}0.03$). The effect of the power setting on the defect width($0.15{\pm}0.01$) is not so great as defect depth or defect area compared to lateral force($0.12{\pm}0.01$) and effect of instrumentation time is minimal($0.02{\pm}0.01$). It could be concluded that the power setting has the greatest influence on the defect depth and area in curette type tip with low power of piezoelectric ultrasonic device. Many parameters can be adjusted in various situation in clinical use of piezoelectric ultrasonic scaler but the power setting is the first parameter to be adjusted.

• 센서학회지
• /
• 제18권4호
• /
• pp.294-300
• /
• 2009

Cardiopulmonary resuscitation(CPR) is performed by artificial ventilation and thoracic compression for the patient under emergent situation to maintain at least the minimum level of respiration and blood circulation for life survival. Quality of the pre-hospital CPR not only significantly affects the patient's survival rate but also minimizes side effects caused by CPR. Good quality CPR requires monitoring respiration, however, traditional respiratory air flow transducers cannot be used because the transducer elements are located on the flow axis. The present study developed a new technique with no physical object on the flow stream but enabling the air flow measurement and easily incorporated with the CPR devices. A turbulence chamber was formed in the middle of the respiratory tube by locally enlarging the cross-sectional area where the flow related turbulence was generated inducing energy loss which was in turn converted into pressure difference. The turbulence chamber was simply an empty enlarged air space, thus no physical object was placed on the flow stream, but still the flow rate could be evaluated. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999 (P<0.0001) and the mean relative error<1 %. The present results can be usefully applied to accurately monitor the air flow rate during CPR.

• 대한치과보철학회지
• /
• 제49권4호
• /
• pp.341-345
• /
• 2011

DNA 복제과정에서의 오류(error)에 의한 유전적 변이(genetic variation)를 통해 개개인이 가지고 있는 유전변이형을 조사하고 특정 질환에 대한 감수성의 차이를 밝히는 유전체 연관성 연구가 의학계 전반에 활발히 진행되고 있다. 개인 간의 DNA 상에 존재하는 염기서열의 차이를 보이는 유전적 변이를 통해 개인간의 형질이 다르게 표현 되는 것을 다형성이라고 하는데 다형성의 원인 중 염기 서열 한 쌍의 변이에 의하여 다른 형질로 표현되는 것을 단일염기다형성(Single Nucleotide Polymorphism; SNP)이라고 정의한다. 유전자 분석 기술의 놀랄만한 발전과 컴퓨터를 이용한 분석 프로그램의 개발에 의해 SNP과 질병의 연관성에 관한 연구는 의학계 모든 분야에서 가속화 되고 있다. 최근 급격하게 빨리 진척되는 연구들에 힘입어 특정 질병에 대한 특정 유전자가 가지는 위험도를 분석하고 환자를 유전적 위험도에 따라 분류하여 진단, 예방 및 치료하는 환자 맞춤식의 진료가 모든 의약학 분야에 적용 될 것으로 생각 된다. 치과 영역에서는 충치와 치주 질환과의 관련성에 대해서 초기 단계의 연구가 진행되고 있는 수준이다. 본 종설에서는 유전체 질병 연구의 현황과 치과 영역에서 시작된 연구를 소개 하고자 한다.

• Journal of Periodontal and Implant Science
• /
• 제52권1호
• /
• pp.3-27
• /
• 2022

Purpose: This study was conducted to evaluate and compare the effects of different graft materials used in alveolar ridge preservation on dimensional hard tissue changes of the alveolar ridge, assessed using cone-beam computed tomography (CBCT) scans. Methods: A systematic electronic search of MEDLINE and the Cochrane Central Register of Controlled Trials and a manual search were conducted from November 2019 until January 2020. Randomized controlled trials were included if they assessed at least 1 variable related to vertical or horizontal hard tissue changes measured using CBCT scans. After a qualitative analysis of the included studies, subgroups were formed according to the graft material used, and a quantitative analysis was performed for 5 outcome variables: changes in vertical alveolar bone height at 2 points (midbuccal and midpalatal/midlingual) and changes in horizontal (buccolingual) alveolar bone width at 3 different levels from the initial crest height (1, 3, and 5 mm). Results: The search resulted in 1,582 studies, and after an independent 3-stage screening, 16 studies were selected for qualitative analysis and 9 for quantitative analysis. The metaanalysis showed a significantly (P<0.05) lower reduction of alveolar ridge dimensions for the xenogenic subgroup than in the allogenic subgroup, both vertically at the midbuccal aspect (weighted mean difference [WMD]=-0.20; standard error [SE]=0.26 vs. WMD=-0.90; SE=0.22) as well as horizontally at 1 mm (WMD=-1.32; SE=0.07 vs. WMD=-2.99; SE=0.96) and 3 mm (WMD=-0.78; SE=0.11 vs. WMD=-1.63; SE=0.40) from the initial crest height. No statistical analysis could be performed for the autogenic subgroup because it was not reported in sufficient numbers. Conclusions: Less vertical and horizontal bone reduction was observed when xenogenic graft materials were used than when allogenic graft materials were used; however, the loss of alveolar ridge dimensions could not be completely prevented by any graft material.