• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.367-374
• /
• 2007

Purpose: The diagnostic relevancies and characteristics and of clinical methods in the diagnosis of internal derangement(ID) were tested by comparing the results of them with those of magnetic resonance imaging(MRI). Methods: 75 patients(150 temporomandibular joints; TMJs), who were suspected to have ID by clinical diagnoses, were included. Clinical diagnoses including mouth opening pathway and TMJ sound were conducted and MRI takings were done. Accuracies, sensitivities, specificities, positive predictive values, and negative predictive values of clinical diagnosis, mouth opening pathway, and TMJ sound were calculated by comparing with diagnoses with MRIs. Results: Accuracy, sensitivity, specificity, positive predictive value, and negative predictive value of clinical diagnosis were 59.3%, 83%, 49%, 81%, and 51%. They were 59%, 82%, 25%, 73%, and 35% for mouth opening pathways. Although deviation was somewhat accurate for representing disc displacement with reduction(ADDWR), other discrepancies on opening pathways were not clinically relevant. Accuracy, sensitivity, specificity, positive predictive value, and negative predictive value of clicking sounds were 85%, 49%, 78%, 85%, and 37%. TMJs with crepitus were only three. But all TMJs with crepitus were diagnosed to have disc displacement without reduction(ADDWOR). Conclusion: When compared with diagnoses with MRIs, clinical diagnoses for ID were not so accurate. But they were suitable for screening tests for ID. Opening pathways and TMJ sounds were not so relevant in the diagnoses of IDs and so it was concluded that considerations for other factors must be included in the diagnoses of IDs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.594-605
• /
• 2006

Statement of problem: Modification of titanium implant surface has potential to ensure clinically favorable performance that several surface modification technologies have been introduced. Among the methods. anodizing method and sol-gel hydroxyapatite coating method have gained much interest due to its roughness and chemical composition of the coating layer, but more of its biocompatibility result is required. Purpose : The purpose of this study was to compare bone-implant interface shear strength of four different surface treated implants as time elapsed. Resonance frequency analysis(RFA) and removal torque measurement methods were employed to measure implant stability at one week and six week after implantation. Material and method: A total of 80 screw-shaped implant [20 machined, 20 resorbable media blasted(RBM), 20 anodized, and 20 anodized+hydroxyapatite sol-gel coated] were prepared, and one of each group was implanted in the tibia of a New Zealand white rabbit that total 20 of them were used. In order to test the implant stability and implant-tissue interface contact changing in the bone bed, each 10 rabbit were sacrificed 1 week and 6 week later while resonance frequency and removal torque were measured. One-way analysis of variance and the Tukey test were used for statistical analysis. Results : The results were as follows. 1. There was no statistically significant difference of implant stability quotients(ISQ) value in RFA between individual groups after 1 week of implantation and 6 weeks(p>0.05). But, there was statistically significant increase of ISQ value in 6 weeks group compared to 1 week group(p<0.05). 2. There was no statistically significant difference in removal torque analysis between individual groups after 1 week of implantation and 6 weeks(p>0.05). but there was statistically significant increase in all 4 groups after 6 weeks compared to 1 week later(p<0.05). 3. There was no statistically significant difference in removal torque analysis between anodized group and HA coating after anodic oxidation 6 weeks later(p>0.05), but significant difference was appeared in both groups compared to RBM group and smooth-machined group(p<0.05). Conclusions : It can be suggested that changes in surface characteristics affect bone reactions. Anodized and anodized+hydroxyapatite sol-gel coating showed significantly improved bone tissue response to implants, but further study on the effect of hydroxyapatite dissolution is needed.

• Journal of Periodontal and Implant Science
• /
• v.49 no.6
• /
• pp.366-381
• /
• 2019

Purpose: The purpose of this study was to evaluate the effectiveness of conventional sandblasted, large-grit, acid-etched (SLA) surface coated with a pH buffering solution based on surface wettability, blood protein adhesion, osteoblast affinity, and platelet adhesion and activation. Methods: Titanium discs and implants with conventional SLA surface (SA), SLA surface in an aqueous calcium chloride solution (CA), and SLA surface with a pH buffering agent (SOI) were prepared. The wetting velocity was measured by the number of threads wetted by blood over an interval of time. Serum albumin adsorption was tested using the bicinchoninic acid assay and by measuring fluorescence intensity. Osteoblast activity assays (osteoblast adhesion, proliferation, differentiation, mineralization, and migration) were also performed, and platelet adhesion and activation assays were conducted. Results: In both the wetting velocity test and the serum albumin adsorption assay, the SOI surface displayed a significantly higher wetting velocity than the SA surface (P=0.000 and P=0.000, respectively). In the osteoblast adhesion, proliferation, differentiation, and mineralization tests, the mean values for SOI were all higher than those for SA and CA. On the osteoblast migration, platelet adhesion, and activation tests, SOI also showed significantly higher values than SA (P=0.040, P=0.000, and P=0.000, respectively). Conclusions: SOI exhibited higher hydrophilicity and affinity for proteins, cells, and platelets than SA. Within the limits of this study, it may be concluded that coating an implant with a pH buffering agent can induce the attachment of platelets, proteins, and cells to the implant surface. Further studies should be conducted to directly compare SOI with other conventional surfaces with regard to its safety and effectiveness in clinical settings.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.255-265
• /
• 1996

The purpose of the present study is to evaluate dimensional consistency, bristle finishes and bristle rebound rate of four brands of $Dentichek^{(R)}$ toothbrushes(regular-male, regular-female, soft-male, soft-female) to provide referneces in product enhancement and quality control for the manufacturer and to provide suggestions in selecting appropriate toothbrushes for general public. The results are as follows : 1. The size of the head is : $25.10{\times}8.10mm$ for male toothbrushes and $19.90{\times}8.10mm$ for male toothbrushes, while the size of the bristle portion is: $29.90{\times}10.65mm$ for male toothbrushes and $25.25{\times}10.65mm$ for female toothbrushes. 2. The length of the bristles is 10.70mm in all four groups. 3. The length of the toothbrush is 192mm in all four groups. 4. The number of tuft is 43 for male toothbrushes and 35 for female toothbrushes. Tuft arrangement is 4-row configuration in all four groups. 5. The number of bristles in a tuft ranges from 40-56, with higher numbers in male toothbrushes compared to the female counterparts, and higher numbers in the "soft" variety compared to the regular ones. 6. The diameter of the bristle is : 0.21mm for the outer row and 0.19mm for the inner row in the regular brand, and 0.17mm for the soft brand. 7. Irregularly finished bristle ends comprised 20-22% of the total bristles. 8. The bristle rebound rate ranges from 55.9% to 62.3%, with higher numbers in the "soft" variety compared to the regular ones. The above results show that $Dentichek^{(R)}$ toothbrushes meet the requirements of Korean Dental Association standards for toothbrushes, but further evaluations of their effects on periodontium and plaque elimination in actual in-use situation may be needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.21-33
• /
• 2007

Statement of problem: The esthetic component of dental care has become increasingly more important, while new tooth-colored materials are continually marketed. Various new indirect composite materials have been developed with required advantages. The most recent development in the indirect composites has been the introduction of the second-generation laboratory composite or poly-glass materials. They are processed by different laboratory techniques based on combinations of heat, pressure, vacuum and light polymerization. Although, second generation products became available in 1995, their characteristics and clinical performance have not been adequately investigated. Purpose: The aim of this study was to measure the mechanical properties of the second generation indirect resin system and compare these with an existing universal direct composite resin. Material and method: In this study four indirect composite material (Adoro LC, BelleGlass HP, Tescera, Synfony) were tested for flexural strength, wear resistance, hardness and their degree of conversion against Z250, a light cure direct composite. Results: Within the limitations of this study, the following conclusions were drawn: 1. From the abrasion wear result, Adoro showed the least volume loss while Synfony showed the greatest volume loss. Z250 and BelleGlass HP didn't show significant difference (p>0.05), but they showed significant difference with other groups (p<0.05). From the attrition wear, BelleGlass HP showed the least volume loss and it didn’t show significant difference with Tescera (p>0.05). While Synfony showed the greatest volume loss that it showed significant difference with other groups (p>0.05). 2. Mean values of flexural strength by means of three point bending test was in the order of Z250, Adoro, Belleglass HP, Tescera and Synfony. Mean elastic modulus was in the order of Z250, BelleGlass HP, Tescera, Adoro and Synfony. 3. The result of Vicker‘s microhardness value showed that significantly higher value in Z250 (p<0.05), and is in the order of BelleGlass HP, Tescera, Adoro and Synfony. 4. The degree of conversion measured by FT-IR showed significantly higher value in BelleGlass HP (p<0.05), and is in the order of Adoro, Synfony, Tescera and Z250. Conclusion: Significant differences were found in the flexural strength, wear resistance, hardness and their degree of conversion.

• Journal of Periodontal and Implant Science
• /
• v.48 no.5
• /
• pp.305-316
• /
• 2018

Purpose: The aim of the present study was to evaluate the biocompatibility and barrier function of mussel adhesive protein (MAP)-loaded collagen membranes in guided bone regeneration (GBR). Methods: Eight male New Zealand white rabbits were used. Four circular defects (diameter: 8 mm) were created in the calvarium of each animal. The defects were randomly assigned to 1) a negative control group, 2) a cyanoacrylate (CA)-loaded collagen membrane group (the CA group), 3) a MAP-loaded collagen membrane group (the MAP group), and 4) a group that received a polycaprolactone block with MAP-loaded collagen membrane (the MAP-PCL group). Specimens were harvested at 2 weeks (n=4) and 8 weeks (n=4) postoperatively for observational histology and histometric analysis. Results: In the histologic analysis, MAP was completely absorbed without any byproducts. In contrast, some of the CA adhesive remained, showing an inflammatory reaction, at 8 weeks. In the MAP-PCL group, the MAP-loaded collagen membranes served as a barrier membrane despite their fast degradation in GBR. No significant difference was found in the amount of new bone between the MAP-PCL and MAP groups ($1.82{\pm}0.86mm^2$ and $2.60{\pm}0.65mm^2$, respectively). Conclusions: The MAP-loaded collagen membrane functioned efficiently in this rabbit calvarial GBR model, with excellent biocompatibility. Further research is needed to assess clinical applications in defect types that are more challenging for GBR than those used in the current model.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.355-362
• /
• 2001

Data derived from odontometric studies are useful in many areas. Especially crown diameter of primary teeth is important in not only anthropology but also clinical dentistry. The purposes of this study were to compare diameters of primary molars of Korean children with those of preformed stainless steel crown, and examine racial characteristics of primary molars of Korean children. The mesiodistal and buccolingual diameters of primary molars were measured on dental casts taken from 235 children(male 105, female 131), with digital calipers. And the data were compared with those of preformed stainless steel crowns. The results were as follows; 1. No significant difference was observed between the right and left members of antimeric teeth and all primary molars of male were larger than those of female. 2. The diameters of primary molars of Korean are smaller than those of Austrailian aborigines and there was significant difference between diameters of primary molars of Korean and those of other populations. 3. There were size differences between diameters of maxillary, mandibular first molar and preformed stainless steel crown than other primary molars, relatively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.531-538
• /
• 2009

Xylitol has the ability to reduce the adherence of Streptococcus mutans(S. mutans), which can make it easier to remove plaque, decrease acid production and inhibit dental caries. There are few reports on the effects of xylitol on the expression of the virulence related genes in S. mutans. This study examined the inhibitory effect of chewing gum containing xylitol on glucan synthesis related gene expression of S. mutans. Participants were voluntarily recruited for a women's oral health prevention program, classified into two groups(a control and a xylitol group), and then followed for 2 years. Twenty salivary samples were randomly selected from each group. Colony count and real-time reverse transcription polymerase chain reaction were used to analyze the characteristics of S. mutans. The following results were obtained: The S. mutans counts decreased steadily in the xylitol group over the study period(p<0.05). The expression of the virulence related genes (gtfB, gtfC and gtfD) was significantly lower in the xylitol group than in the control groups (p<0.05). In conclusion, these results suggest that chewing xylitol gum for a long period of time may reduce the expression of the genes associated with S. mutans virulence, which can result in a decrease growth of S. mutans colonies as a result.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.260-267
• /
• 2013

The aim of this study was to analyze the three dimensional characteristics of the size, shape and location of mesiodens and their effect on permanent teeth arrangement using Cone-beam computed tomography(CBCT). 191 patients under 15 years old who had visited the hospital between June 2006 and December 2012 and taken CBCT were investigated. Among them, 43 patients with diastema were analyzed to investigate the correlation between the amount of diastema and the mesiodens. The results showed that mesiodens were found in males 3.9 times more than females and found most in 7 years old. The mean length of mesiodens was 13 mm and the width was 6.8 mm. The conical shape comprised of 52.9%. Many mesiodens were located in the palatal side rather than the labial side and located vertically near the crown. 63.0% of mesiodens were reversed and the common complications were delayed eruption followed by diastema, and teeth rotation. And the amount of diastema had correlation with size and mesiodistal position of the mesiodens. The current study used 3D analysis to show the size and position of mesiodens and occurrence distribution of complication. Among these, the amount of diastema had shown the correlation with the size and mesiodistal position of mesiodens.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3017-3021
• /
• 2013

Background: Health Related Quality of Life (HRQoL) is an important aspect in identifying cancer patients' perceptions of being diagnosed with cancer and the assessment of treatment outcomes. The present study aimedto assess the profile and predicators of HRQoL of Malaysian oncology patients. Materials and Methods: A cross sectional study adopting the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire (EORTC QLQ-C30) was conducted. All cancer patients attending Penang General Hospital between August-November 2011 were approached. Descriptive statistics were used to assess demographic and disease related characteristics of the patients. All analyses were performed using SPSS v 16.0. Results: Three hundred and ninety three cancer patients met the inclusion criteria and were enrolled in the study. The mean age was 53.9 ($SD{\pm}13$) years. The cohort was dominated by females (n=260, 66.2%). Nearly half (n=190, 48.3%) of the participants were of Malay ethnicity, practicing Islam as their religion (n=194, 494%). Two hundred and ninety six (n=296, 75.3%) had beene diagnosed with cancer within six months to 3 years previously. The most common primary cancer site was breast (n=143, 36.4%). The mean Global Health Status (GHS) score was 60.7 (SD=21.3). Females (mean GHS score of 62.3, p=0.035) with Malay ethnicity (mean GHS score of 63.8, p=0.047), practicing Islam as their religion (mean GHS score of 63.0, p=0.011) had better GHS scores. Patients having medical insurance had good scores (mean 65.6, p-0.021). Marital status was significantly associated with GHS scores (p=0.022). Bone cancer patientshad the lowest mean GHS score of 49.2 (p=0.044). Patients at very advanced stages of cancer featured a low GHS mean score of 52.2 (p<0.001). Conclusions: The present study identified many demographic and disease related factors which may contribute to the HRQoL of cancer patients, pointing to the necessity for improved management of disease symptoms and provision of psychological and financial support.